Free models · Game-ready GLB
Modern
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
14,038 free GLB models
AnimatedHand pallet truck (Vertical Farm and Hydroponics Tower)
A hand pallet truck: steel forks that rise on the pump, a tiller arm that rocks back with its grip and trigger, steer wheels at the head and tandem load rollers at the fork tips.
AnimatedScissor lift work platform, raised (Vertical Farm and Hydroponics Tower)
The same scissor lift at full height with the stack extended and the deck at 2.6 m, for servicing the top tier of a rack or the duct run. Wheels turn and the deck gate swings; the linkage is baked in the raised pose.
AnimatedRack shuttle robot on rail (Vertical Farm and Hydroponics Tower)
An automated tray shuttle on its own 2 m rail section: a low carriage with guide rollers, a telescopic transfer deck carrying a grow tray and a blank status panel. The carriage runs the rail and the transfer flap at the rail end lifts.
Shuttle rail run, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m section of the aisle rail the rack shuttle runs on: two capped rails on sleepers set in the slab, a yellow keep clear stripe either side and a ported end so the run repeats down an aisle.
AnimatedScissor lift work platform, stowed (Vertical Farm and Hydroponics Tower)
A compact electric scissor lift stowed: a yellow chassis on four solid tyres, a two stage scissor stack, a guarded work deck with a swinging entry gate and a blank control box on the rail.
Monitoring tablet on a stand (Vertical Farm and Hydroponics Tower)
A floor stand with a tablet at chest height on a tilting bracket, its screen blank and dark, a cable clip down the column and a weighted disc foot, as a grower keeps beside the packing line.
Environment sensor pole (Vertical Farm and Hydroponics Tower)
A 2.4 m sensor pole on a weighted foot: a radiation shielded temperature and humidity head, a carbon dioxide head, a light sensor on its arm and a junction box with the cable entries, all blank.
AnimatedControl cabinet (Vertical Farm and Hydroponics Tower)
A 1.2 m plant control cabinet on a plinth: two hinged doors, a blank touch screen and a row of unlabelled indicator lamps on the right door, gland plate at the foot and a beacon on top. The doors open on their hinges.
AnimatedCarbon dioxide cylinder rack (Vertical Farm and Hydroponics Tower)
A six cylinder carbon dioxide rack against the wall: cylinders in two rows behind a restraint bar, a two stage regulator manifold with its blank gauges, a handwheel isolation valve and a warning plate left blank.
Supply duct run, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m ported supply duct on wall brackets at 2.6 m: a rectangular galvanised section with its flanged joints, a takeoff spigot and a four way diffuser hanging under it.
AnimatedAir handling unit (Vertical Farm and Hydroponics Tower)
A 2.4 m packaged air handling unit on a plinth: filter, coil and fan sections, a hinged access door with a sight port, the supply fan behind the guard turning, and spigots on both ends for the duct run.
AnimatedGrow room dehumidifier (Vertical Farm and Hydroponics Tower)
A floor standing grow room dehumidifier on castors: a louvred discharge with a fan behind it that spins, a condensate drawer that pulls out at the foot, a blank humidity readout and the drain hose spigot at the back.
AnimatedReverse osmosis rack (Vertical Farm and Hydroponics Tower)
A framed reverse osmosis set: six membrane vessels in two banks on a galvanised frame, the high pressure pump at the foot with a turning rotor, a pre filter pair, a handwheel on the concentrate line and a blank instrument panel.
AnimatedService pipework run, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m ported service run: flow and return nutrient mains on wall brackets at 2.2 m, two drop legs to floor plates with a handwheel valve on each and a blank labelled band at every pipe end. The handwheels turn.
AnimatedPump and filter set (Vertical Farm and Hydroponics Tower)
A skid of two centrifugal circulation pumps on their plinth with a duty and standby arrangement, two sand filters on legs beside them, isolation handwheels either side and a pressure gauge board. The pump rotors and the handwheels turn.
AnimatedNutrient reservoir tank (Vertical Farm and Hydroponics Tower)
A 2 m by 1.4 m nutrient reservoir: a white tank 1.2 m deep on a bunded plinth with the solution level modelled, an inspection lid that lifts, a sight glass up one end and the suction and return flanges on the near face.
AnimatedNutrient dosing skid (Vertical Farm and Hydroponics Tower)
A skid mounted dosing set: three stock tanks of concentrate and acid on a bunded base frame, four peristaltic dosing pumps whose rotors turn, a mixing manifold with a handwheel valve and a blank control fascia.
UV steriliser (Vertical Farm and Hydroponics Tower)
An inline ultraviolet steriliser: a stainless chamber on a wall frame with the lamp end caps, the flow in and out flanges, a blank hour counter box and the ballast enclosure under it.
AnimatedWash and spin station (Vertical Farm and Hydroponics Tower)
A 2 m wash line: a deep stainless wash sink with the water modelled, a swan neck tap, and a spin dryer alongside whose lid lifts and whose perforated basket spins, with a drained crate on the drainer.
AnimatedPallet and stretch wrapper (Vertical Farm and Hydroponics Tower)
A stretch wrapping station: a plastic pallet of crates standing on a turntable that spins, with the film carriage on its mast alongside and a part wrapped film skirt round the bottom courses.
Packing bench (Vertical Farm and Hydroponics Tower)
A 2 m packing bench: a checkweigher with a blank readout, a bagging chute, a roll of film on its spindle, two crates of cut leaf below and a stack of flat packed boxes at the end.
AnimatedHarvest bench with conveyor stub (Vertical Farm and Hydroponics Tower)
A 2 m harvest bench with a short gravity roller stub running off one end at deck height: a cut tray on the top, a crate catching under the rollers, and the rollers themselves turn.
Transplanting bench (Vertical Farm and Hydroponics Tower)
A 2 m stainless transplanting bench: a plug tray and a part planted grow tray on the top, a rack of spare trays under it, a waste chute at one end and a set of dibbers and a spacing board on the upstand.
Nutrient tote stack (Vertical Farm and Hydroponics Tower)
Two blue 1,000 litre intermediate bulk containers in their galvanised cages on pallets, stacked one on the other, with the outlet valve and a blank label panel on the near face.