Free models · Game-ready GLB
Modern
Every realistic modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
10,121 free GLB models
Vault Door Circular (Bank Vault Heist Kit)
Circular vault door, 2.4 m diameter and 0.42 m thick: stepped steel disc, five-spoke handwheel, combination dial, sixteen radial locking bolts, rear time-lock plate with three movements and two heavy hinge arms on a floor-to-lintel hinge pin.
Vault Wall 1 m (Bank Vault Heist Kit)
Plain vault lining wall module, 1 m by 2.6 m and 0.5 m thick, faced with two brushed steel panels over a dark plinth and head rail.
Deposit Box Wall Corner (Bank Vault Heist Kit)
Inside corner for the deposit box wall: an L of two 0.5 m box fields meeting at the room corner, so a run along x turns to run along z.
Vault Wall Corner (Bank Vault Heist Kit)
Inside corner for the plain vault lining wall with steel panels on both inner faces.
Vault Wall Plan Corner (Bank Vault Heist Kit)
Planning-view corner block matching vault-wall-corner.
Vault Door Frame (Bank Vault Heist Kit)
Vault door frame: a 3 m by 2.6 m by 0.5 m armoured wall section with a real 2.4 m circular opening, front collar ring, rear door stop ring and twelve anchor bolt heads.
Deposit Box Wall Straight (Bank Vault Heist Kit)
Safe deposit box wall module, 1 m wide and 2.6 m tall on the vault grid. Two rows of large drawers below and four columns of small boxes above, each with a brass keyway and number plate.
Vault Wall Plan 1 m (Bank Vault Heist Kit)
Planning-view stand-in for any 1 m vault wall module: a 0.3 m tall footprint block with a steel cap for top-down layouts.
Deposit Box Wall End (Bank Vault Heist Kit)
Deposit box wall termination: 0.75 m of boxes closed by a full-height brushed steel pilaster that finishes the exposed east end.
Drift run to the working face (Underground Mine and Shaft Works)
A development drift sequence: an incline ramp rising into a level run of rock, timbered and steel arch supported sections and a shotcrete lined length leading to a dead end working face, with the drilling jumbo set up at the face, a roof bolter behind it and ventilation duct...
Shaft bottom station (Underground Mine and Shaft Works)
A shaft bottom station: the lined station chamber with the shaft above, the man cage on its guides and the skip loading pocket beside it; narrow gauge track running north through a cutaway review section to a battery locomotive and two ore cars; and a widened services chamber...
Lamp room tally board (Underground Mine and Shaft Works)
A timber tally board with three rows of numbered hooks and brass check tags, a header label and a lower shelf.
Mine connector cases (Underground Mine and Shaft Works)
Independent test rows proving each connector type: drift ports joining a straight to a curve, a tee, a cross, a ramp and a widened chamber; narrow gauge rail ports joining straight and curved panels through a turnout; and ventilation duct ports joining a straight run to a bend.
Drill steel rack (Underground Mine and Shaft Works)
A steel rack of seven drill rods with thread protectors, a shelf of button bits and a stencilled length label.
Surface shaft headworks (Underground Mine and Shaft Works)
The surface headworks: the headframe standing over the shaft collar with the man cage at the deck, the winder house facing it across the rope run, the main ventilation fan house on its plinth, the tipple and cars on the loading side, and stacked timber and stores.
Mine warning sign (Underground Mine and Shaft Works)
A hazard sign on a steel post in a concrete foot, with a hatched border, a text panel and a smaller instruction plate below.
Blasting wire spool (Underground Mine and Shaft Works)
A wooden cored spool of shot firing wire on a folding steel stand, with a carrying handle and a loose lead.
Mine timber stack (Underground Mine and Shaft Works)
A cross stacked pile of sawn mine timber on bearers, strapped with steel banding and covered by a tarpaulin sheet, with a stock label.
Ore sample tray (Underground Mine and Shaft Works)
A partitioned timber sample tray holding twenty broken ore fragments with numbered labels along the front rail.
Explosives day box (Underground Mine and Shaft Works)
A lockable steel explosives day box with a hinged lid, edge banding, a hasp, a timber base and a hazard label.
Survey station and tripod (Underground Mine and Shaft Works)
A survey tripod carrying a total station over a floor spad, with a tribrach, adjustable legs, foot spikes and a marker plate.
Belt worn self rescuer (Underground Mine and Shaft Works)
A belt worn self rescuer: a sealed steel canister in a carrier with a banded seal, a release catch, an instruction label and a belt strap.
Service water line 4 m (Underground Mine and Shaft Works)
A 4 m run of 100 mm service water pipe on the same wall brackets, with a smaller isolating valve and a hose drop.
Hard hat with cap lamp (Underground Mine and Shaft Works)
A mine hard hat with a lamp bracket, a cap lamp, a coiled cord and a belt mounted battery pack.