Free models · Game-ready GLB
Modular
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,316 free GLB models
Sauna bench module (Hotel and Resort Operations)
A 1.8 m two-tier sauna bench: slatted upper and lower decks on timber frames with a leaning slatted backrest, a step and a timber-handled ladle rest.
Mobile acoustic partition (Hotel and Resort Operations)
A 2.8 m three-bay mobile acoustic partition, 2.0 m tall: framed panels faced both sides with welted acoustic pads, edge posts, a capping rail and six named pivoted castors.
Conference table bow end (Hotel and Resort Operations)
A bow end module closing a conference run: a half-round rolled-edge top on an A-frame leg and a turned column, with a modesty panel.
AnimatedConference table module (Hotel and Resort Operations)
A 1.6 by 0.9 m conference table module at 0.73 m: a rolled-edge top on two welded A-frame legs with a spine rail, a modesty panel and a named pivoted cable-box lid over two socket faces.
Buffet counter corner module (Hotel and Resort Operations)
A corner module for the buffet run: two clad fascia legs meeting on the run centrelines under a wrapped stainless top with a round well and gastronorm pan, plus a turned sneeze guard.
AnimatedBreakfast buffet counter, hot (Hotel and Resort Operations)
A 0.6 m hot buffet counter module on the 0.9 m counter grid: a stainless carcass on a recessed plinth, a timber guest fascia with an accent reveal and a tube tray slide, a top aperture over a heated well with two gastronorm pans, a named pivoted roll-top lid and a sneeze guard.
AnimatedBreakfast buffet counter, cold (Hotel and Resort Operations)
The buffet counter module as a chilled bay: a shallower well with an ice deck and a single wide gastronorm pan under the same named roll-top lid and sneeze guard.
AnimatedRevolving door module (Hotel and Resort Operations)
A 2.2 m revolving door, 2.49 m to the canopy top: two curved glazed drum quadrants with head and cill rails, four corner mullions, a central spindle carrying four named glass wings, and a canopy ring.
Check-in desk corner module (Hotel and Resort Operations)
A corner module for the check-in run: two fascia legs meeting on the run centrelines with a wrapped bullnose ledge, an accent shadow line on both faces, a staff worktop and three support posts.
Check-in desk module, accessible bay (Hotel and Resort Operations)
The check-in counter module as a 0.76 m accessible bay with an open knee recess, a lowered worktop, levelling feet and a rear support rail.
AnimatedCheck-in desk module (Hotel and Resort Operations)
A 0.6 m check-in counter module on the 0.9 m guest-top grid, 0.7 m deep: a timber fascia on a recessed plinth with an accent shadow line, a bullnose guest ledge, a staff worktop at 0.74 m and a named pivoted till drawer behind.
Partition wall module with vision panel (Hotel and Resort Operations)
A 1 m partition wall module with a 0.62 by 1.1 m glazed vision panel in a timber reveal above a 0.95 m sill.
Partition wall corner (Hotel and Resort Operations)
A 1 m partition wall corner: two legs meeting on the run centrelines, with skirting and capping rails carried round both faces. It carries one port on each leg so an L closes without a gap.
Partition wall module (Hotel and Resort Operations)
A 1 m partition wall module, 2.6 m tall and 100 mm thick, with skirting on both faces and a capping rail.
Corridor ceiling raft with a light slot (Hotel and Resort Operations)
The corridor ceiling raft with a continuous recessed light slot instead of three downlights.
Corridor ceiling raft with downlights (Hotel and Resort Operations)
A 1.2 by 1.6 m corridor ceiling raft: a coffered plaster tray with three recessed downlights, a slot extract grille and an emergency light box. Hang it with the raft underside at 2.7 m.
AnimatedIce and vending alcove (Hotel and Resort Operations)
A 1.2 m corridor alcove recessed 620 mm: a back panel, two returns and a head with a timber lintel, holding an ice machine with a named pivoted flap and drip grille and a glazed vending cabinet with three shelf rows, a keypad and a delivery flap.
AnimatedService door module (Hotel and Resort Operations)
A 1.2 m corridor module with a back-of-house service door: a named pivoted flush leaf with a kick plate, a push plate, a lever and a keypad, plus a wall sign and an overhead closer.
AnimatedGuest room door module with card reader (Hotel and Resort Operations)
A 1.2 m corridor module with a 0.9 by 2.1 m guest room doorway: a timber lining and architrave, a named pivoted leaf with a lever, cylinder, peephole and kick plate, a card reader on the wall, a number plate and an overhead closer with an arm.
Corridor wall module, upholstered panels (Hotel and Resort Operations)
A 1.2 m corridor wall module with four welted upholstered panels between three timber stiles, a dado rail, deep skirting and a capping rail.
AnimatedFire door module (Hotel and Resort Operations)
A 1.2 m corridor module with a double fire door: two named pivoted leaves with glazed vision panels, protection plates, push bars, hold-open magnets on the reveals and a head-mounted closer bar under a signage panel.
Corridor wall module (Hotel and Resort Operations)
A 1.2 m corridor wall module, 2.7 m tall and 120 mm thick: a papered field above a timber dado rail, deep skirting and a wall uplighter with a lit lens.
Blackout curtain and track (Hotel and Resort Operations)
A 2.4 m ceiling curtain track with two gathered blackout drapes on runners and a sheer panel behind on its own rail.
patrol path tile (Prison Complex Builder)
Two-metre patrol path slab with safety edge lines and expansion strips.