Free models · Game-ready GLB
Exterior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,025 free GLB models
Food Tray with Burger and Chips (Street Food Market and Food Trucks)
A 360 mm serving tray dressed with a meal: a red tray with a paper liner, a stacked burger of bun, patty, cheese and salad, a card carton of chips and a sauce pot. Origin on the tray base, so it sits on a counter or a picnic table. Static.
Queue Rail Section (Street Food Market and Food Trucks)
A 2 m bay of queue barrier: two posts on footplates set in from the ends, a steel top rail, a red middle rail and three infill bars. Bays butt end to end into a queue line of any length, with end ports on both ends.
Water Butt (Street Food Market and Food Trucks)
A 1.28 m water butt: a green drum with three charcoal bands on a weighted base, a domed lid with a steel filler cap and a brass tap and lever near the bottom. The tap does not turn and the lid is part of the drum.
Fire Extinguisher Point (Street Food Market and Food Trucks)
A 1.6 m fire point: a red signage board on a charcoal base with a white pictogram panel and a yellow instruction strip, and two extinguishers, one water and one powder, standing in front of it with their hoses and handles. Static.
Gas Bottle Cage (Street Food Market and Food Trucks)
A 1.3 m gas bottle cage: a welded steel frame on a charcoal base with barred sides, four propane bottles with their valve collars inside it and a red hazard plate on the front. The cage has no door; the bottles are solid.
Crate Stack (Street Food Market and Food Trucks)
A 1.2 m stack of four market crates, each turned a little on the one below: two timber, one red and one green, all with slatted fronts and a dark interior. Dressing for the back of a stall or the side of a truck. Static.
AnimatedCool Box (Street Food Market and Food Trucks)
A 860 mm insulated cool box: a green body with a moulded rim, two charcoal carry handles and a white lid hinged along its back edge with a catch tab. The lid opens and closes; the box is solid inside.
Portable Generator (Street Food Market and Food Trucks)
A 940 mm site generator: a yellow acoustic case on a charcoal skid with a louvred side, a charcoal top panel, an exhaust stack, a red control box with a lifting handle and a painted rating plate. Static; the engine and the socket panel are solid.
Hand Wash Station (Street Food Market and Food Trucks)
A 1.76 m portable hand wash unit: a steel cabinet on a charcoal plinth with a basin let into the top, a swan neck tap and a lever, a green water tank on the back with a yellow label and a soap dispenser on the side. Nothing moves.
Recycling Station (Street Food Market and Food Trucks)
A 1.86 m three stream recycling station: green, yellow and red bins in a charcoal cradle, each with a slotted lid and a painted label panel, under a header board on two posts. The lids are part of the bodies and do not open.
AnimatedMarket Bin (Street Food Market and Food Trucks)
A 1.04 m market litter bin: a tapered charcoal body with a steel band, a yellow label plate and a domed steel lid hinged along its back edge with a grab tab. The lid opens and closes; the liner is not modelled.
Planter with Shrub (Street Food Market and Food Trucks)
A 900 mm timber market planter: a slatted box with a charcoal liner, a soil bed and a clipped shrub of three faceted crowns. Used to close the end of a run of stalls or to hold a queue line. Static foliage; no wind.
Pallet Seating Unit (Street Food Market and Food Trucks)
A 1.2 m pallet bench: two stacked timber pallets with a red cushion on top and a third pallet leaned back as a rest, with a yellow cap rail. The kind of seating a market builds from what it already has. Static.
Bar Stool (Street Food Market and Food Trucks)
A 1.06 m bar stool: a timber seat at 790 mm on a steel column with a footring and a weighted base, and a red back rail on two posts behind it. Sized to the high table and the bar stall counter. Static.
Picnic Bench (Street Food Market and Food Trucks)
A 1.8 m picnic bench: a four slat timber top at 780 mm on two splayed steel A frames with a tie bar between them, and a fixed bench plank down each side at 490 mm. Seats about six. Static timber and steel; nothing folds.
High Table (Street Food Market and Food Trucks)
A 1.12 m poseur table: a round timber top 1.04 m across on a steel column and a weighted charcoal base, with a steel rim under the top. The height a market crowd eats standing at. Static.
Market Floor Tile Cobble (Street Food Market and Food Trucks)
The same 4 m floor module in setts: a charcoal bed with twenty five raised stones in two greys on it, for the older half of a market square or the strip a run of trucks parks on. Same four edge ports and the same 100 mm datum as the paved tile.
Market Floor Tile (Street Food Market and Food Trucks)
A 4 x 4 m paved market floor tile: a 100 mm concrete slab with a charcoal joint cross and an inset joint round the edge, so a run of tiles reads as paving rather than as one flat sheet. Four edge ports; tiles butt into a yard of any size.
Market Parasol (Street Food Market and Food Trucks)
A 2.7 m parasol on a weighted base: an eight panel red canopy on steel ribs with a scalloped hem, a cap and a finial. Sized to shade a high table or the end of a picnic bench. The canopy is rigid and cannot be closed.
Stall Number Sign (Street Food Market and Food Trucks)
A 2.2 m pitch number sign on a cast base: a red plate with a yellow number panel and a charcoal name strip under it. The number is a painted block, not readable text, so one model serves every pitch on a market. Static.
Chalkboard A Frame (Street Food Market and Food Trucks)
A 1.05 m pavement A frame: two chalk panels in timber frames leaned together with a steel spreader bar between them, three painted chalk lines on each face. The hinge is solid and the frame does not fold, because the two panels share no node a rigid transform could drive.
String Light Run on Poles (Street Food Market and Food Trucks)
A 6 m bay of festoon lighting: a 3.6 m steel pole on a base plate with a cross arm, and a sagging cord of eight bulbs leaving it. Bays butt pole to span so a row of them lights a whole market. The cord is rigid and the bulbs do not emit light.
Menu Board on Legs (Street Food Market and Food Trucks)
A 1.5 m menu board at 1.95 m on two steel legs with footplates: a charcoal panel with a red header strip and five painted price lines under it, plus a timber shelf along the bottom edge. The lines are painted blocks, not readable text. Static.
Stall Counter Module (Street Food Market and Food Trucks)
A 2 m serving counter module at 950 mm: a timber fascia with a kick recess and a yellow rail, a steel worktop overhanging it and two feet set in from the ends so modules butt into a run of any length. End ports on both ends.