Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,478 free GLB models
Strigil and Oil Flask Tray (Roman Bathhouse and Palaestra)
A bronze tray 540 mm across holding a bather's kit: two curved strigils for scraping oil off the skin, two globular oil flasks on loop handles and a small marble unguent pot, on a timber liner. Set it on a bench, a ledge or an attendant's table.
Clothes Hook Rail (Roman Bathhouse and Palaestra)
A 1.6 m clothes hook rail: five bronze double hooks on a timber batten with iron end straps, for the wall over a changing bench. Mount it at the height a scene wants; the model rests on y=0 with the batten just above the ground.
Apodyterium Changing Bench with Cubbies (Roman Bathhouse and Palaestra)
A 2.4 m changing bench for an apodyterium: a travertine seat on three piers with a marble top, against a rendered back wall carrying two ranks of timber cubby shelves divided into eight openings, with a folded towel and a pair of sandals left in them.
Water Spout Mask (Roman Bathhouse and Palaestra)
A carved stone spout head 560 mm square: an abstract rosette boss of concentric rings and twelve radial cuts on a travertine block, with a bronze nozzle through the middle. It is a pattern, not a face or a creature, so it carries no deity and no portrait.
Fountain Basin (Roman Bathhouse and Palaestra)
A wall fountain basin 1.9 m wide: a travertine trough on four walls with a moulded marble rim, a red panelled back slab under a marble voussoir arch, and a bronze spout over the water. The water is a still translucent slab and the spout does not run.
Labrum Basin on Stand (Roman Bathhouse and Palaestra)
A labrum: a 1.75 m marble washing basin on a turned baluster stand, 1.5 m tall, with a red rim moulding, a short bronze filler in the middle and a flat still water surface in the bowl. It stands in the apse of a hot room for a bather to splash from. The water does not move.
Tepidarium Hypocaust Cutaway Floor (Roman Bathhouse and Palaestra)
A 4 m square tepidarium floor shown as a cutaway section: fired clay pilae stacks in a 660 mm grid under a suspended deck of tiles, mortar screed and mosaic, with one quarter of the deck and its pilae removed so the 790 mm heating void underneath is open to view.
Hypocaust Pilae Stack (Roman Bathhouse and Palaestra)
A single hypocaust pilae stack 790 mm tall: a mortar footing, a column of square fired clay bessales laid with a mortar joint between each, and a bedding tile on top. Stacks stand in a grid under a suspended floor so the furnace gas can run between them.
Frigidarium Cold Plunge Basin (Roman Bathhouse and Palaestra)
A cold plunge basin for a frigidarium, 3.5 m by 2.5 m and 1.05 m high: a mortared tank lined in white marble with a red inlaid floor band, a moulded marble rim, three steps down into it at one end and a pair of bronze grab rails over them.
Caldarium Apse Section (Roman Bathhouse and Palaestra)
A semicircular apse section for the end of a hot room, 5.2 m across and 4 m to the springing: a coursed travertine drum 420 mm thick with a moulded cornice, the first three courses of the half dome over it, and a marble bench running round the foot.
Caldarium Hot Pool (Roman Bathhouse and Palaestra)
A hot pool for a caldarium, 4.5 m by 2.9 m and 850 mm high: a marble lined tank with a seat ledge along both long sides, a moulded rim, and a bronze delivery spout on a pedestal at one end.
Opus Sectile Panel (Roman Bathhouse and Palaestra)
A 1.6 m by 2.2 m opus sectile panel: cut stone shapes, squares set on point, discs and lozenges in red porphyry, white marble and dark stone, laid proud of a travertine ground in a mortar backing. An abstract geometric field with no figures and no lettering.
AnimatedSecurity Camera on a Wall Mount (Cyberpunk Apartment and Neon Block)
A bullet camera on a 300 mm wall arm: a plate, a tubular arm and a spindle carrying the head, with a lens hood, a glass front, an emitter ring and a status lamp. The head sweeps 62 degrees either side on its spindle; the arm and plate are fixed.
AnimatedExtract Fan and Grille (Cyberpunk Apartment and Neon Block)
A 680 mm square extract fan plate with a 600 mm throat: a five blade impeller on its hub behind a wire guard of three rings and six spokes, on four mounting bosses. The blades are one node and spin about the shaft; the guard and plate are fixed.
AnimatedAir Scrubber Unit (Cyberpunk Apartment and Neon Block)
A 680 by 440 mm air handling unit 1.05 m tall: a louvred inlet, a filter drawer with a bar pull, a blank control plate with three knobs, a guarded impeller on the right flank and an outlet spigot on the roof.
AnimatedStim Cabinet with Abstract Vials (Cyberpunk Apartment and Neon Block)
A 500 by 260 mm wall cabinet 1.1 m tall with two shelves and twenty one capped vials in three colourways, a lit strip at the head and a glazed lockable door on its left stile. The vials are plain tapered tubes: no label, dose, mark or word is modelled on any of them.
AnimatedMedical Kit Box (Cyberpunk Apartment and Neon Block)
A 420 by 300 mm hard medical case 320 mm to the handle: a moulded body with a steel cross field on the front, two catches and a crowned lid on a back edge hinge. The cross is two plain crossed bars, not an emblem or a trademark, and the case carries no text.
Prosthetic Arm on a Stand (Cyberpunk Apartment and Neon Block)
A powered prosthetic arm hung on a weighted floor stand, 1.5 m to the socket: a socket cup, an upper segment, an elbow joint, a ribbed forearm, a wrist and a four finger hand, with a lead to a blank faced controller clipped on the post.
AnimatedDelivery Drone on a Charge Pad (Cyberpunk Apartment and Neon Block)
A 560 mm quadrotor resting on a 680 mm charge pad with a lit contact ring: a moulded body with an underslung camera gimbal, four arms on rubber ringed skids, four two blade rotors and a status strip.
Parts Tray Stack (Cyberpunk Apartment and Neon Block)
A 660 mm steel frame holding six open parts trays in three tiers, 440 mm tall, each with seven abstract components loose in it. Blank: the components are plain blocks, not modelled devices.
AnimatedWorkbench with Soldering Station (Cyberpunk Apartment and Neon Block)
A 1.5 by 680 mm steel bench at 900 mm with a rubber matted top, two drawers on runners and a pegboard behind it carrying four hung tools, a coil of solder and a lit strip.
Gun Locker, Open and Empty (Cyberpunk Apartment and Neon Block)
A 440 by 360 mm steel locker 1.57 m tall standing open and empty: a foam lined back with two cut recesses, two bare clips, a shelf with an amber lamp, and a plated door with a keypad and a lever pull swung 89 degrees clear.
AnimatedGun Locker, Closed (Cyberpunk Apartment and Neon Block)
The same locker shut on its keypad, for a row where one is open and the rest are not. The door swings on its left stile.
Cable Spaghetti Bundle (Cyberpunk Apartment and Neon Block)
The cabling a subdivided cell really carries: a 900 mm wall tray on two brackets with sixteen cables in it, three drops sagging to the floor, two ties, a loose coil and a four way adaptor block. Roughly 900 by 400 mm on plan and 1.5 m tall.