Free models · Game-ready GLB
Animated
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
1,425 free GLB models
AnimatedAttack Periscope Stand (Submarine Interior and Control Room)
The attack periscope housed in its well: a 1.3 m stand with a brass bearing ring graduated in 24 divisions, a capped barrel stub, a boxed hoist frame and a hoist handwheel on the wheel-hoist node. Stands on the deck beside the search periscope.
AnimatedSearch Periscope (Submarine Interior and Control Room)
A 3.1 m search periscope through the deck: a gland and well with a brass training ring, a stepped barrel, an eyepiece housing with a rubber brow and a bearing dial, and an optics head with a window band.
AnimatedHigh Pressure Air Manifold (Submarine Interior and Control Room)
A bulkhead mounted air manifold 1.24 m wide: a flanged 150 mm header on a stiffened back plate, four branch valves with 220 mm handwheels, a drain trap and a bank of four pressure dials over them. Each wheel turns about Z on its own wheel-1 to wheel-4 node.
AnimatedPipe Junction with Valve Wheels (Submarine Interior and Control Room)
A junction in a 120 mm sea water main: a globe valve with a 340 mm handwheel on the main, a branch tee dropping to the bilge with its own 240 mm wheel, a pressure dial on a standpipe and two hull brackets. Both wheels turn about Z on the wheel-stop and wheel-branch nodes.
AnimatedConning Tower Base (Submarine Interior and Control Room)
The bottom 2.4 m of a fin: a faired tower 2.7 m long and 1.5 m across with free flood slots down each flank, step irons up the after side, a bridge coaming, two masthead fairings and an access trunk with a hinged lid on the hatch node.
AnimatedOverhead Hatch and Ladder (Submarine Interior and Control Room)
The climb out of a compartment: a 2.3 m ladder of two stiles and eight rungs from the deck flat to a 1 m trunk coaming at the hull crown, with a grab rail round it and a dished lid hinged on its after edge.
AnimatedWatertight Bulkhead with Dogged Door (Submarine Interior and Control Room)
A watertight bulkhead filling a 3.5 m internal hull: stiffened plating, a bolted blank inspection plate and a 720 by 1520 mm oval doorway with a 200 mm sill, closed by a dogged door. The leaf carries six dogs and its dogging wheel and swings on the door node.
AnimatedDeck Plate Section with Hatch (Submarine Interior and Control Room)
The same deck plate section built as four rails round a 780 mm opening, with a raised coaming and a dished lid hinged on its after edge.
AnimatedCigarette Vending Machine (Izakaya Alley and Ramen Shop)
A 1.84 m alley cigarette machine: a narrower steel cabinet with a glazed display of twenty four blank packs in invented colours, unmarked selection keys, a card reader plate and a collection flap on its own node. Nothing on it is a brand or a health mark.
AnimatedDrinks Vending Machine (Izakaya Alley and Ramen Shop)
A 1.92 m alley drinks machine: a steel cabinet, a glazed display of fifteen blank cans and bottles in invented colours, a row of unmarked selection keys, a coin race, a note slot and a collection flap on its own node that swings up. No product carries a name.
AnimatedHot Can Vending Machine (Izakaya Alley and Ramen Shop)
The same 1.92 m machine in the vermilion and cream of a hot can unit, which is how an alley tells the warm machine from the cold one at a glance. Geometry unchanged, including the blank stock and the flap node; only the paint differs.
AnimatedIzakaya Front Bay (Izakaya Alley and Ramen Shop)
A 4 m izakaya frontage: a timber framed opening with a fixed lattice light, a sliding lattice leaf on its track, a plinth, a deep head beam, a four panel vermilion noren and a round lantern hung beside the door. The leaf is a named node and slides 1.5 m open.
AnimatedPrep Bench with Chopping Board (Izakaya Alley and Ramen Shop)
A 1.4 m stainless prep bench: a bullnosed top, an undershelf with three containers, a splash upstand and a full width drawer on runners, dressed with a timber chopping board and a knife. The drawer is a named node and runs out over its own depth.
AnimatedChest Fridge (Izakaya Alley and Ramen Shop)
The 1.3 m chest fridge a small kitchen keeps its stock in: a cream cabinet on a charcoal plinth, a counterbalanced lid with a grab bar and a control pod on the front. The lid is a named node hinged along its back edge and lifts clear of the tub.
AnimatedNoodle Boiling Well (Izakaya Alley and Ramen Shop)
A 900 mm noodle boiling well: a heated tank sunk into a stainless stand, a perforated draining shelf beside it and a long handled noodle basket standing in the water. The basket is a named node and lifts straight out of the well.
AnimatedNoodle Delivery Bicycle (Izakaya Alley and Ramen Shop)
A 1.8 m delivery bicycle with a square steel carrier and a strapped vermilion box over the front wheel, an indigo frame, a sprung saddle and flat bars. Both wheels are named nodes on their own axles and roll on one clip.
AnimatedAlley Waste Bins (Izakaya Alley and Ramen Shop)
Three 860 mm wheeled trade bins standing in a row against an alley wall, in indigo, green and charcoal for the sorted streams. Each lid is a named node hinged on its back edge, so all three open together on one clip.
AnimatedAir Conditioning Outdoor Unit (Izakaya Alley and Ramen Shop)
A 950 mm split system condenser on two wall brackets: a painted case with a louvred coil, a discharge grille, refrigerant and drain lines and a four bladed fan on its own node. The fan spins; everything else is fixed.
AnimatedWall Extractor Fan (Izakaya Alley and Ramen Shop)
A 780 mm steel wall extract fan over an alley kitchen: a cased body on two brackets, a weather hood and a five bladed impeller on its own node, so the fan spins without moving the case. Fixed to a wall, origin at the case foot.
AnimatedShopfront Shutter Bay (Izakaya Alley and Ramen Shop)
A 4 m narrow shopfront bay closed by a 3.3 m steel roller shutter in its guide rails, with a shutter box over the opening and a timber reveal behind. The shutter is a named node and runs 2.2 m up behind the fascia.
AnimatedPopcorn Cart (Travelling Circus and Big Top)
A 1.5 m handcart on two spoked wheels with a glazed warming case, a gilt frame, a red conical canopy and a push handle. The serving hatch is one node on its head rail and both wheels are nodes on the axle.
AnimatedCandyfloss Stand (Travelling Circus and Big Top)
A 1.7 m candyfloss stall: a blue counter with a steel spinning bowl in its guard ring, two sticks of floss on the shelf, a red scalloped canopy on gilt posts and a blank sign board. The bowl is one node and spins.
AnimatedShowground Flood Lamp (Travelling Circus and Big Top)
A 3.3 m flood lamp on a braced tripod mast: a twin steel head with a gold lens face on a yoke. The head is one node on the yoke pin and tilts; the lamp casts no light of its own, since the file carries no light sources.
AnimatedCable Drum (Travelling Circus and Big Top)
A 1.24 m timber cable drum wound with black power cable on a steel spindle, with a chock board behind it. The drum is one node on its own axis, so it rolls without the chock moving.