Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,184 free GLB models
Grab rail set (Office Lobby and Building Facilities)
A 0.6 m horizontal and 0.5 m vertical grab rail set: 36 mm rails on three chromed wall flanges with spacer spigots.
AnimatedPedal sanitary bin (Office Lobby and Building Facilities)
A 0.24 m pedal sanitary bin 0.54 m tall: a tapered chamfered body, a hinged lid as a named pivoted node, a foot pedal on a linkage bar and an accent status strip.
AnimatedPaper towel dispenser (Office Lobby and Building Facilities)
A 0.3 m by 0.42 m paper towel dispenser: a chamfered cabinet, a dispense throat and a hinged front cover as a named pivoted node with a key barrel.
Soap dispenser (Office Lobby and Building Facilities)
A 0.12 m by 0.22 m wall soap dispenser: a chamfered body with a level window, a push lever and a nozzle on a back fixing plate.
Wall hand dryer (Office Lobby and Building Facilities)
A 0.3 m by 0.36 m wall hand dryer: a chamfered wedge body with a nozzle slot, a louvred inlet grille, a status lamp and a back fixing plate.
Washroom mirror run (Office Lobby and Building Facilities)
A 1.6 m by 0.9 m washroom mirror run: a laminated glass panel in a chamfered stainless frame with an accent light band and a top light housing.
Wall-hung WC pan (Office Lobby and Building Facilities)
A 0.36 m by 0.54 m wall-hung WC pan: a moulded ceramic bowl with a real cavity, a shrouded rear trap, a chamfered seat ring with two hinges and a duct flush plate above.
Single basin vanity unit (Office Lobby and Building Facilities)
A 0.62 m single basin vanity unit at 890 mm: a chamfered carcass on a recessed plinth with a handleless rail, a solid-surface top, a countertop basin with a real cavity, a pillar mixer tap and a back upstand.
Vanity trough with two basins (Office Lobby and Building Facilities)
A 1.7 m vanity trough at 900 mm: a moulded trough basin inset in a solid-surface deck built as four rails, an apron and back upstand, a welded steel frame, two pillar mixer taps and two waste grates with bottle traps.
Urinal divider panel (Office Lobby and Building Facilities)
A 0.42 m deep urinal divider panel 1.1 m tall: a chamfered board with a raked leading edge on a wall bracket plate, two fixing spigots and a chromed floor support leg.
Tiled washroom wall module, 1 m (Office Lobby and Building Facilities)
A 1 m tiled washroom wall module 2.6 m tall and 100 mm thick: a chamfered leaf with a nine-course stretcher-bond tile field, an accent border tile band, skirtings both sides and a head trim.
Wall-hung urinal (Office Lobby and Building Facilities)
A 0.36 m wall-hung urinal 0.66 m tall: a moulded ceramic bowl with a real dished cavity, a chromed spreader, a domed waste grate, a flush pipe spigot and a back fixing panel.
Washroom wall corner (Office Lobby and Building Facilities)
A 100 mm washroom wall corner post 2.6 m tall turning a tiled run through ninety degrees, tiled on both exposed faces with a head trim and a skirting collar.
AnimatedAccessible WC cubicle module (Office Lobby and Building Facilities)
A 1.8 m by 2.0 m accessible WC cubicle module 2.0 m tall: a divider, a wide pilaster, a head rail, a duct panel with a flush plate, three grab rails, an alarm pull cord and a 900 mm outward-opening door with a pull rail as a named pivoted node.
AnimatedWC cubicle module, 900 mm (Office Lobby and Building Facilities)
A 900 mm WC cubicle module 2.0 m tall on 150 mm adjustable legs and 1.5 m deep: a divider panel, a front pilaster, a head rail, a rear duct panel with a flush plate and a service hatch, and a hinged door with an indicator bolt and a coat hook as a named pivoted node.
WC cubicle module, door open (Office Lobby and Building Facilities)
The same 900 mm WC cubicle module with the door swung inward through sixty-six degrees, showing the duct panel and flush plate inside.
Wall-mounted corridor handrail (Office Lobby and Building Facilities)
A 1.2 m wall-mounted corridor handrail: a 46 mm stainless tube on three bracket plates with domed returns at both ends.
Corridor ceiling module with air grille (Office Lobby and Building Facilities)
The same 1.2 m ceiling raft without the luminaire, closed with a plain tile and a four-way swirl supply grille.
Corridor ceiling module with lighting (Office Lobby and Building Facilities)
A 1.2 m square corridor ceiling raft 0.15 m deep: a chamfered tray in an exposed grid with a linear luminaire lens, a pendant sprinkler head and a smoke detector.
Corridor doorway module (Office Lobby and Building Facilities)
A 1.2 m corridor wall module with a lined 0.92 m by 2.1 m opening: timber linings, architraves both sides and a head trim, supplied without a leaf for a free opening.
AnimatedFire door module (Office Lobby and Building Facilities)
A 1.2 m fire door module 2.6 m tall: a hardwood frame with intumescent seal rebates, a rated leaf with a vision panel, an overhead closer arm, a kick plate and a blank keep-shut disc, all on a named node pivoted on the hinge edge.
AnimatedCorridor door module with leaf (Office Lobby and Building Facilities)
The same corridor doorway module fitted with a flush hinged leaf as a named node pivoted on its hinge edge, with a lever handle set, an escutcheon and two barrel hinges.
Stair balustrade module, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m glass balustrade module 1.1 m high: a chamfered base shoe, a laminated glass infill, a stainless handrail tube with a timber cap and two intermediate clamps.
Corridor wall module, 1.2 m (Office Lobby and Building Facilities)
A 1.2 m corridor wall module 2.6 m tall and 100 mm thick: a chamfered leaf with skirtings both sides, a timber dado rail, a recessed services plate with two outlets and a head trim.