Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,621 free GLB models
AnimatedBuffet counter run, 3 m (Cruise Ship Deck and Lounge)
Self service buffet counter 3 m long: a white body with a stainless top, four heated wells with charcoal inserts, a glass sneeze guard on stainless posts, a tray slide, a stack of plates and two cupboard doors below that open. Ports at both ends so a servery runs to any length.
Lounge floor tile, 6 m (Cruise Ship Deck and Lounge)
Carpeted lounge floor module 6 m square with a navy border band and a teak threshold strip on one edge, for the soft floored part of a deck under a canopy or inside a pavilion.
Mezzanine stair flight (Vertical Farm and Hydroponics Tower)
A straight stair flight up to the 2.4 m walkway: twelve open mesh treads on steel stringers, a handrail both sides and a bolted foot plate, with a half landing plate at the head.
LED grow bar fixture (Vertical Farm and Hydroponics Tower)
A single 1.8 m LED grow bar: an extruded aluminium body with end caps, a magenta emitting face, the driver box on top and two hanger eyes. Emissive looking geometry only, with no light source in the file.
Mezzanine walkway, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m section of service walkway at 2.4 m: an open mesh deck on a steel frame with legs to the floor, a toe board and a handrail both sides, ported at both ends so a run crosses the room.
Grow room ceiling cassette, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m suspended ceiling cassette for a sealed grow room: a white insulated panel with its grid tee, a flush service light and a sprinkler rose, ported on all four edges.
Grow room corner post (Vertical Farm and Hydroponics Tower)
The corner post that closes two wall runs at a right angle: a 3.2 m column the depth of the panel system with coved returns both ways and a capping cap, ported on the two faces a panel meets.
Grow room wall panel, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m hygienic wall panel 3.2 m tall: an insulated white cassette with its jointing trim, a coved skirting at the foot and a capping rail at the head, ported at both ends so a wall run repeats.
Grow room floor tile, walkway marked (Vertical Farm and Hydroponics Tower)
The same 2 m floor tile with a yellow walkway edge painted down one side, which is how the safe route past the rack aisles and the rail is set out.
Grow room floor tile, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m resin floor tile for a controlled environment room: a 120 mm slab section with a coved edge detail and a lightly dished surface, ported on all four edges so a floor of any size tiles from it.
AnimatedCold store door (Vertical Farm and Hydroponics Tower)
A 2 m wall module with the cold store door in it: a thick insulated leaf on strap hinges with a safety release handle, a blank temperature display over the head, a strip curtain header and a kick plate.
Floor drain run, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m stainless channel drain for the wash area: a slot channel in a shallow surround with a lift out slotted grating, an end sump with its basket and a ported end so the run repeats.
AnimatedAirlock door pair (Vertical Farm and Hydroponics Tower)
A 2 m wall module holding the airlock: twin swing leaves in a stainless frame with round vision panels, kick plates, a blank interlock box beside them and a warning lamp over the head. Both leaves swing.
AnimatedLocker run (Vertical Farm and Hydroponics Tower)
A four door staff locker run 1.6 m wide on a plinth: perforated vent panels, a sloped top so nothing is stored on it, blank card readers and four doors that open on their own hinges.
Gowning bench (Vertical Farm and Hydroponics Tower)
A 1.6 m gowning bench for the changing lobby: a slatted seat with a shoe rack under it, a coat rail of clean coveralls behind, a hairnet and glove dispenser pair and a waste bin at the end.
AnimatedHygiene station with boot wash (Vertical Farm and Hydroponics Tower)
The entry hygiene station: a stainless hand wash trough with sensor taps and two blank dispensers, a grab rail, and a boot wash pit alongside with two upright brushes that turn and a drained grating.
Hand tool rack (Vertical Farm and Hydroponics Tower)
A wall mounted stainless tool rack: harvest knives in their sheaths, two pairs of snips, a scrub brush, a spacing dibber board and a shadow board behind, with a sanitising dip pot on the shelf.
AnimatedTray trolley (Vertical Farm and Hydroponics Tower)
A six shelf tray trolley on braked castors: grow trays at half and full crop on the shelves, a push handle at each end and a bumper rail round the base. Every shelf tray runs out on its channels.
AnimatedHand pallet truck (Vertical Farm and Hydroponics Tower)
A hand pallet truck: steel forks that rise on the pump, a tiller arm that rocks back with its grip and trigger, steer wheels at the head and tandem load rollers at the fork tips.
AnimatedScissor lift work platform, raised (Vertical Farm and Hydroponics Tower)
The same scissor lift at full height with the stack extended and the deck at 2.6 m, for servicing the top tier of a rack or the duct run. Wheels turn and the deck gate swings; the linkage is baked in the raised pose.
AnimatedRack shuttle robot on rail (Vertical Farm and Hydroponics Tower)
An automated tray shuttle on its own 2 m rail section: a low carriage with guide rollers, a telescopic transfer deck carrying a grow tray and a blank status panel. The carriage runs the rail and the transfer flap at the rail end lifts.
Shuttle rail run, 2 m (Vertical Farm and Hydroponics Tower)
A 2 m section of the aisle rail the rack shuttle runs on: two capped rails on sleepers set in the slab, a yellow keep clear stripe either side and a ported end so the run repeats down an aisle.
AnimatedScissor lift work platform, stowed (Vertical Farm and Hydroponics Tower)
A compact electric scissor lift stowed: a yellow chassis on four solid tyres, a two stage scissor stack, a guarded work deck with a swinging entry gate and a blank control box on the rail.
Monitoring tablet on a stand (Vertical Farm and Hydroponics Tower)
A floor stand with a tablet at chest height on a tilting bracket, its screen blank and dark, a cable clip down the column and a weighted disc foot, as a grower keeps beside the packing line.