Free models · Game-ready GLB
Modular
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
2,263 free GLB models
Road module with centre line (Retro Diner and Roadside Motel)
A 5 m length of two lane blacktop, 6 m wide, with a broken centre line and both edge lines painted proud of the wearing course. Run the lengths end to end along the front of a lot to lay the highway a roadside stop faces.
Car park bay module (Retro Diner and Roadside Motel)
A 5 m by 6 m module of marked lot tarmac holding two parking bays: the wearing course with the painted bay lines and the head line standing proud of it, so a field of modules never flickers. Tile it edge to edge to lay a whole car park.
Motel walkway canopy (Retro Diner and Roadside Motel)
A 5 m bay of the covered walk that runs along a motel block: two chrome posts on cast bases with knee braces, a 3 m deep enamel deck with a felt field and a coral fascia across the front. Run the bays end to end against the room block.
AnimatedMotel room block, one room (Retro Diner and Roadside Motel)
The 5 m single room block that ends a motel run or fills a short bay: the same shell, turquoise door on its own node, window with a chrome sill, coral pinstripe, wall lamp and felted roof, on its own apron.
AnimatedMotel room block, two rooms (Retro Diner and Roadside Motel)
A 10 m two room block of a single storey motel: a rendered shell on its own tarmac apron, a turquoise door and a 1.9 m window to each room, a chrome sill nosing, a coral pinstripe over the openings, a wall lamp by each door and a felted flat roof. Each leaf is a named node.
Counter run with chrome edge (Retro Diner and Roadside Motel)
A 2 m bay of diner counter: a turquoise front with a dark toe recess and a chrome kick band, a pale worktop 960 mm to its surface with a full length stainless bullnose, and a low back shelf on the service side. Run the bays end to end.
Diner roof panel (Retro Diner and Roadside Motel)
A 2 m square flat roof bay: an enamel deck with a dark felt field laid proud of it and a stainless edge trim on two sides. Tile it over the shell or the motel office to roof a building, and run the roofline band round the outside.
Diner wall panel (Retro Diner and Roadside Motel)
A 2 m interior partition for the kitchen end: an enamel panel 2.6 m tall with a coral dado line, a dark skirting and a chrome capping, all standing proud of the panel face. Run the panels together to divide a service area off the dining room.
Chequer floor module (Retro Diner and Roadside Motel)
A 2 m square of diner floor: a pale terrazzo slab with sixteen 500 mm squares, the dark ones laid proud of the slab so a field of modules never flickers. Tile it edge to edge under the shell modules to floor a whole diner car.
AnimatedDiner glazed door (Retro Diner and Roadside Motel)
The entrance module: chrome jambs and an enamel head over a single glazed leaf with a turquoise kick panel and a full height push bar. The leaf is a named node hung on its left stile and swings clear of the opening.
Diner window bay (Retro Diner and Roadside Motel)
The 2 m glazed bay of the diner car: a fluted stainless sill, chrome jambs and a transom bar, a pane 1.62 m tall and an enamel head with a coral pinstripe. Run it beside the shell modules to make the window wall a diner sits its booths against.
Diner car module, narrow (Retro Diner and Roadside Motel)
A 2 m length of stainless diner car shell: a black plinth, vertical stainless flutes, a wide chrome band with a turquoise stripe over it, a second chrome band and a coral pinstripe under the roofline, identical on both faces so one module serves inside and out.
Diner car module, wide (Retro Diner and Roadside Motel)
A 4 m length of stainless diner car shell: a black plinth, vertical stainless flutes, a wide chrome band with a turquoise stripe over it, a second chrome band and a coral pinstripe under the roofline, identical on both faces so one module serves inside and out.
Diner car curved end (Retro Diner and Roadside Motel)
The streamlined end of a diner car: a 3 m radius half round of seven fluted stainless chord panels on a black plinth, carrying the same chrome bands and turquoise stripe as the straight modules, with its own floor pan so the end bay is floored.
Diner roofline with chrome band (Retro Diner and Roadside Motel)
A 2 m length of diner roofline: an enamel fascia overhanging the shell on both faces with a wide chrome band, a coral pinstripe and a stainless capping. Sit it on any shell module at 3 m and run the lengths end to end round the building.
Harbour office front (Fish Market and Trawler Quay)
The same 6 m front rendered as a harbour office: painted blockwork, a glazed entrance, a blank notice case, upper floor windows, two condenser units on the parapet and a flagless signal mast beside the door.
Chandlery shop front (Fish Market and Trawler Quay)
A 6 m timber shore front for a ship chandler: a stall riser, two glazed windows dressed with buoys and coiled line, a recessed glazed door, a blank fascia board, a parapet and an A frame board on the pavement.
Market floor module with channel drain (Fish Market and Trawler Quay)
The 4 m square a fish market floor is laid from: a power floated slab falling to a central channel drain under its stainless grating, with a rodding eye in one corner, ported on the quay's own 4 m ground grid.
Market hall bay, shutter up (Fish Market and Trawler Quay)
The same bay with its shutter rolled into the head box: the drum and the bottom rail show at the head and the opening is clear onto the quay, which is how a market bay stands through a working morning.
AnimatedMarket hall bay with roller shutter (Fish Market and Trawler Quay)
One 4 m bay of an open fronted fish market: a tiled back wall with a blank trader panel, a half pier each side, a roof deck on its beams with lights under it, and a roller shutter that rolls up into its head box across the full width opening.
Quay edge module with ladder head (Fish Market and Trawler Quay)
The 4 m by 3 m edge of the quay: a steel faced coping along the lip, a yellow safety line set back from it, two recessed tie down pockets and the head of a wall ladder, with its curved grab stiles standing above the coping.
Harbour water module, 8 m (Fish Market and Trawler Quay)
An 8 m square of harbour water with a faint swell worked into its surface, for laying the basin around a berth. Ported on all four edges, so the water tiles out to meet the quay rather than leaving a hole in the ground.
Quay deck module, 4 m (Fish Market and Trawler Quay)
The plain 4 m square of a working quay: power floated concrete with saw cut joints and a cast in drain channel under its grating, ported on all four edges so a quay tiles to any size.
Steel trawler stern section with slipway (Fish Market and Trawler Quay)
The after 7 m of the hull, built the way a stern trawler really is: the deck is split by an open slipway trough running up from a raked transom, with rubbing rollers down its cheeks, a bulkhead at its head and the gallows posts and towing beam over the quarters.