Free models · CC0

Roads infrastructure

Every realistic sci-fi roads infrastructure below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.

Load one straight from its CDN URL with a plain GLTFLoader, or take a whole roads infrastructure set from the packs.

66 free GLB models

Cordon fence corner (UFO Crash Site and Recovery Facility)

A right-angle cordon corner turning a taped line through 90 degrees, with ports on the west and south arms.

@3dassets536 tris

Cordon fence run (UFO Crash Site and Recovery Facility)

A 4 m cordon run: three footed posts, two tubular rails, a taped line and a blank warning plate. Ports at both ends so runs chain.

@3dassets484 tris

Pad edge wind baffle (Hover Transit and Antigrav Fleet)

A five metre curved wind baffle screen with six louvre slats, a lit top rail and splayed feet, for sheltering a landing pad edge.

@3dassets1.4k tris

Skylane direction gantry sign (Hover Transit and Antigrav Fleet)

A five metre cantilever direction sign with a framed board, three lit legend bands, a chevron and an under-board lamp bar.

@3dassets452 tris

Kerbside drop-off module (Hover Transit and Antigrav Fleet)

A six metre kerbside module with a raised footway, boarding shelter, bollards, bay markings and lane ports on the road edges.

@3dassets1.7k tris

Hover parking stack frame (Hover Transit and Antigrav Fleet)

A three level open parking stack frame with grid decks, edge guards, glowing bay strips and a head canopy.

@3dassets1.7k tris

Hover service bay with lift deck (Hover Transit and Antigrav Fleet)

An open four column service bay with a scissor lift deck at 1.15 m, hazard guards, overhead light rails and a rear tool board.

@3dassets1.5k tris

Repulsor charging pylon (Hover Transit and Antigrav Fleet)

A kerbside charging pylon with an inductive coil head, a swing boom and a drop coupler over the bay, plus a lit status panel.

@3dassets944 tris

Skylane air traffic gantry (Hover Transit and Antigrav Fleet)

A thirteen metre span traffic gantry with a lattice cross beam, four signal heads, sensor pods and a lit lane band.

@3dassets2.9k tris

Hover lane beacon, amber lane closure (Hover Transit and Antigrav Fleet)

The lane beacon with an amber head instead of a cyan one, for marking a closed or diverted lane in the same row.

@3dassets1.2k tris

Hover lane beacon (Hover Transit and Antigrav Fleet)

A four metre skylane beacon mast with a glowing coil ring head, sensor pod and weighted base.

@3dassets1.2k tris

Hover landing pad tile (Hover Transit and Antigrav Fleet)

A six metre landing pad tile with concentric touchdown rings, a cross marking, edge approach lights and lane ports on all four edges.

@3dassets2.2k tris

Hover craft docking cradle (Hover Transit and Antigrav Fleet)

A splayed docking cradle whose padded saddle carries a parked hover craft at 1.15 m, with alignment guides and a service coupler column.

@3dassets1.2k tris

Repulsor road plate, lane terminator (Hover Transit and Antigrav Fleet)

The repulsor road plate closed off by a stop block with a warning bar and two lit posts, ending a lane run.

@3dassets908 tris

Repulsor road plate, four way (Hover Transit and Antigrav Fleet)

The repulsor road plate as a four way junction with crossing induction arcs and a glowing conflict ring.

@3dassets1.0k tris

Repulsor road plate, quarter turn (Hover Transit and Antigrav Fleet)

The repulsor road plate with its induction arcs swept through a quarter turn, joining a south lane port to an east one.

@3dassets1.2k tris

Repulsor road plate, straight (Hover Transit and Antigrav Fleet)

A six metre square repulsor road plate with twin induction arcs, edge kerb light strips and lane ports on two edges.

@3dassets644 tris

Blast berm segment (Lunar Surface Colony and Rovers)

A 6 m modular regolith blast berm for a pad perimeter: a graded 2 m bank with a compacted toe, five marker posts and a retaining rail on the pad side.

@3dassets612 tris

Landing pad blast deflector wall (Lunar Surface Colony and Rovers)

A 6 m wide curved blast deflector for a landing pad rim: a battered concave wall on six raked buttresses that spread to 8.9 m, with ballast blocks and bearing pads, topped by five hazard markers.

@3dassets984 tris

Sintered landing pad (Lunar Surface Colony and Rovers)

A 14 m circular landing pad graded and sintered into the regolith: a raised apron with a sixteen-segment plate pattern, three concentric target rings and a centre bullseye, ringed by eight lit edge markers.

@3dassets2.2k tris