Free models · CC0
Props
Every prop below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
297 free GLB models
Five-bar field gate, open (Arable Fields and Farm Machinery)
The five-bar field gate swung open on its hinge post, clearing the gateway.
Five-bar field gate, closed (Arable Fields and Farm Machinery)
A 3.5 m tubular five-bar field gate hung between two round posts, with diagonal bracing, hinge straps and a latch; the gate leaf turns on its own hinge pivot.
Post and wire fence run, 8 m (Arable Fields and Farm Machinery)
An 8 m stock fence run: seven round timber posts, four line wires, close verticals forming netting in the lower half and a braced strainer at each end.
Hinged hatch cover (Orbital Station and Docking Bays)
A 2 m hatch cover assembly: a bolted seat ring with a sealed face and six latch blocks, and a domed insulated cover swung fully open on a named hinge node carried by two support links.
Common berthing mechanism (Orbital Station and Docking Bays)
A 2.5 m passive berthing ring: a bolted flange with sixteen powered bolts, four capture latch housings with their striker plates, four alignment guides and a sealed hatch face.
Extended soft capture ring (Orbital Station and Docking Bays)
A 2 m soft capture ring shown extended on six linear actuators: a fixed base flange, telescoping struts with damper bodies, the capture ring with a yellow contact band and three alignment blocks.
Androgynous docking port (Orbital Station and Docking Bays)
A 2.1 m androgynous docking mechanism: a bolted base flange with a station hatch port at the rear, an active capture ring with three guide petals, four latch housings and a target patch.
Banquette run 1400, leather (Bar, Pub and Brewery Taproom)
The 1.4 m banquette module finished in dark leather rather than woven upholstery.
Banquette corner (Bar, Pub and Brewery Taproom)
The banquette corner: a 580 mm square seat box with a piped pad and two fluted back pads meeting on a turned corner pilaster, at the same seat and back heights as the run.
Banquette run 1400 (Bar, Pub and Brewery Taproom)
A 1.4 m banquette module: a panelled base with a piped seat pad, a fluted upright back pad and a moulded capping rail. Butt-joints against the next module along X.
Back bar glass shelf run (Bar, Pub and Brewery Taproom)
A back bar bay of five toughened glass shelves on brass pin brackets against a mirrored back, each with a slim brass light strip beneath it.
Back bar spirit shelf run (Bar, Pub and Brewery Taproom)
An open back bar bay: four deep timber spirit shelves on shaped brackets against a boarded back, each with a brass gallery rail, over the panelled base and under the moulded cornice.
Back bar bottle fridge bay (Bar, Pub and Brewery Taproom)
A back bar bay with a glazed bottle fridge in the base: two glass doors on barrel hinges with bar handles over three wire shelves, a louvred grille, and two display shelves with gallery rails and a blank lit sign band above.
Back bar mirrored bay (Bar, Pub and Brewery Taproom)
A back bar bay built around a tall framed mirror: a panelled base cabinet with fielded doors, a bullnose worktop, a moulded mirror frame, a single display shelf with a brass gallery rail and a moulded cornice above.
Back bar bottle steps bay (Bar, Pub and Brewery Taproom)
A full height back bar bay of bottle steps: a panelled base cabinet with fielded doors and brass knobs, a bullnose worktop, four stepped display tiers with moulded nosings and brass gallery rails against a mirrored back, framed by turned pilasters under a moulded cornice.
Two tier cask stillage (Bar, Pub and Brewery Taproom)
The cask stillage in a two tier configuration: a second cradle deck 420 mm above the first on continued uprights, for stacking casks in a working cellar.
Cask stillage frame (Bar, Pub and Brewery Taproom)
A 1.2 m steel cask stillage: two cradle rails on box-section legs with diagonal braces, four vee chocks that hold a cask level, and rubber floor pads.
Bar top section with bullnose (Bar, Pub and Brewery Taproom)
A loose 1.2 m bar top section: a postformed slab with a full bullnose nosing bead along the customer edge, a brass edge strip and the bearer rails on its underside.
Bar front panelling section (Bar, Pub and Brewery Taproom)
A 1.2 m loose section of bar front panelling: a dark skirting plinth, three bevelled fielded panels in a rail and stile frame, corner stiles and a moulded capping rail.
Bar service hatch module (Bar, Pub and Brewery Taproom)
A counter module closed off with a snug service hatch: turned posts carrying an arched voussoir head, a shelf across the opening and a slatted roller shutter drawn down behind it.
Bar waiter station module (Bar, Pub and Brewery Taproom)
A counter module set up as the waiter station: a stainless tray shelf inside the bar, a docket rail on posts with blank order slips, a stack of round drinks trays and a divided condiment box.
Bar counter till position (Bar, Pub and Brewery Taproom)
A counter module built as the till position: a stainless plinth carrying a tilted touch terminal and a card reader, a docket spike and a cash drawer under the bar top.
Bar counter end with the flap raised (Bar, Pub and Brewery Taproom)
The bar counter end module with its hinged top leaf swung up on the newel post and the gate opened, showing the service passage in use.
Bar counter corner (Bar, Pub and Brewery Taproom)
A 90 degree bar counter corner on the same grid: two fielded panel faces meeting on a turned pilaster, a mitred bar top with brass nosing on both edges and a foot rail turning the corner.