Free models · CC0
Props
Every prop below is a self-contained .glb under 5 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
2,317 free GLB models
Five-bar field gate, open (Arable Fields and Farm Machinery)
The five-bar field gate swung open on its hinge post, clearing the gateway.
Five-bar field gate, closed (Arable Fields and Farm Machinery)
A 3.5 m tubular five-bar field gate hung between two round posts, with diagonal bracing, hinge straps and a latch; the gate leaf turns on its own hinge pivot.
Post and wire fence run, 8 m (Arable Fields and Farm Machinery)
An 8 m stock fence run: seven round timber posts, four line wires, close verticals forming netting in the lower half and a braced strainer at each end.
Cabin ventilation duct run (Orbital Station and Docking Bays)
A 2 m cabin ventilation run on a module wall segment: a rectangular duct with flanged joints and a louvred diffuser, a fan box with a bladed inlet grille, a ribbed flexible hose loop and a service label.
Waste and hygiene stall (Orbital Station and Docking Bays)
A 2.1 m waste and hygiene compartment: a three-sided stall with a folding door on a named hinge node, a waste unit with a seat interface, a ribbed hose on its holder, two grab rails, a control panel and a ceiling light.
Cable and utility bundle run (Orbital Station and Docking Bays)
A 2.2 m utility run on a module wall segment: three standoff clamps with cable rings, a six-cable bundle in mixed jacket colours, a junction box with three connector stubs, a service label and an end grommet.
Portable foot restraint (Orbital Station and Docking Bays)
A 0.55 m portable foot restraint: a bolted base plate, an adjustable post with a locking knob, a named yaw node and an angled platform with two shoe cups, toe bars and heel clips.
Stowage bag wall (Orbital Station and Docking Bays)
A 1.9 by 1.7 m stowage wall: a module wall segment with eight soft cargo transfer bags of three sizes, each with a closure flap and a yellow pull tab, held by three webbing straps on two vertical rails.
Crew laptop station (Orbital Station and Docking Bays)
A 1.4 m crew laptop station on a section of module wall: a bolted mount plate, a two-segment articulating arm with joint housings, a laptop with a tilted screen, a routed power cable and a wall utility outlet.
Resistive exercise device (Orbital Station and Docking Bays)
A 2.15 m resistive exercise machine: a bolted base with a grip deck, two cylinder canisters on uprights, a cable pair, a loaded lift bar on the rails, an adjustable foot bar, a pad and a control display.
Sealed science glovebox (Orbital Station and Docking Bays)
A 1.7 m sealed science glovebox: a bolted equipment base, a rounded work volume with a front window and frame rails, two gauntlet ports, an interior work tray, a side transfer airlock and a control panel with indicator lights.
Payload rack, stowage livery (Orbital Station and Docking Bays)
The payload rack in the darker stowage livery used for logistics bays, with grey drawer fronts and a gold identification band above the display.
Crew sleep station (Orbital Station and Docking Bays)
A 2.05 m crew sleep station: a three-sided acoustic booth with a restrained sleeping bag and pillow, tether straps, a laptop on a swing arm, a reading light, wall stowage pockets and a folded privacy curtain.
International payload rack (Orbital Station and Docking Bays)
A 2.01 m standard payload rack with a trapezoidal shell that follows the module wall: five drawer fronts with pull handles, a control display, a cooling vent stack, rear standoffs with umbilicals and a named tilt hinge node.
Hinged hatch cover (Orbital Station and Docking Bays)
A 2 m hatch cover assembly: a bolted seat ring with a sealed face and six latch blocks, and a domed insulated cover swung fully open on a named hinge node carried by two support links.
Common berthing mechanism (Orbital Station and Docking Bays)
A 2.5 m passive berthing ring: a bolted flange with sixteen powered bolts, four capture latch housings with their striker plates, four alignment guides and a sealed hatch face.
Extended soft capture ring (Orbital Station and Docking Bays)
A 2 m soft capture ring shown extended on six linear actuators: a fixed base flange, telescoping struts with damper bodies, the capture ring with a yellow contact band and three alignment blocks.
Androgynous docking port (Orbital Station and Docking Bays)
A 2.1 m androgynous docking mechanism: a bolted base flange with a station hatch port at the rear, an active capture ring with three guide petals, four latch housings and a target patch.
AnimatedPlayer height marker (Pickups and Collectibles)
A banded scale post with a gold plate at exactly 1.75 m, adult standing height, and a hovering chevron above it. Drop it beside a pickup to judge collectible scale.
AnimatedRespawn ring (Pickups and Collectibles)
Standing respawn ring 1.5 m tall: a 1.1 m gold hoop with a violet inner band and eight rune blocks, held on two canted arms over a hexagonal plinth, with a crystal core at its centre.
AnimatedSpawner pad, large (Pickups and Collectibles)
Two-metre spawner pad with three concentric gold rings, six violet glyph spokes and six crystal-tipped pylons round the rim. The boss or vehicle spawn.
AnimatedSpawner pad (Pickups and Collectibles)
Hexagonal spawner pad 1.24 m across with a stepped deck, six violet glyph spokes, two gold rings and an octahedral crystal core floating 0.64 m above it.
AnimatedSupply dispenser, hatch open (Pickups and Collectibles)
The dispenser with its hatch lifted 78 degrees and a banded supply pack sitting on the chute lip, ready to be taken. The dispensed state.
AnimatedSupply drop, landed (Pickups and Collectibles)
The same drop on the ground: crate resting flat with its lid ajar 35 degrees, the canopy collapsed into eleven folds heaped beside it and four rigging lines slack across the floor. Clips both ways from there.