Free models · Game-ready GLB
Props
Every realistic prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
7,779 free GLB models
Waste Drum, Unmarked (Nuclear Power Station and Control Room)
The waste drum in plain galvanised finish for clean side use, with the same hinged lid.
Waste Drum, Lid Open (Nuclear Power Station and Control Room)
The waste drum with its lid held open at 96 degrees and the bag ring inside on show, for a drum being filled. The open pose is baked into the geometry, so the lid does not animate.
Waste Drum (Nuclear Power Station and Control Room)
A 200 litre waste drum: a rolled steel body with two swage ribs, a trefoil on the flank and a clamp banded lid hinged at the back that lifts on its own node.
Sample Glovebox (Nuclear Power Station and Control Room)
A 1.5 m stainless sampling glovebox on a tubular stand: a sloped laminated window, two glove ports with the gloves hanging inside, a transfer port on the end, an extract duct off the top and a tool drawer in the stand.
Dosimeter Rack (Nuclear Power Station and Control Room)
An 800 mm wall rack of thirty two pocket dosimeters standing in their charging sockets on four shelves, with a trefoil badge at the head and a blank tag strip along the bottom.
Decontamination Shower (Nuclear Power Station and Control Room)
A 1.1 m decontamination shower: a galvanised tray with a gulley, two panelled sides, a riser with a 320 mm drench rose and a pull handle, an eyewash bottle on a bracket, an alarm beacon and a curtain rail.
Survey Meter Bench (Nuclear Power Station and Control Room)
A 1.6 m steel survey bench with a galvanised top and an upstand: a hand held survey meter with a dial and a carrying handle on it, its probe in a rest, and a tray of smear papers beside them.
PPE Locker with Suits (Nuclear Power Station and Control Room)
A 1.2 m protective clothing locker: a painted carcass on a recessed plinth with four coveralls on a hanging rail, three hoods on the shelf above, and two louvred doors that swing on their own nodes.
Hand and Foot Monitor (Nuclear Power Station and Control Room)
A walk-up hand and foot monitor: a grating foot plate on a base, a raked top with two hand wells and their lit windows, and a display head with three lamp tiles above it.
Instrument Cabinet Rack (Nuclear Power Station and Control Room)
A 640 mm instrument rack 2 m tall: a bolted frame with a back panel and eight plug-in modules, each with a pull handle, lamps and a small lit window, behind a glazed front door that swings.
Radiation Monitor Pillar (Nuclear Power Station and Control Room)
A 2.2 m area monitor pillar: a yellow column on a footplate carrying a readout box with a lit window and lamps, a detector head and a beacon on top, and a probe clipped to a bracket down one side.
Telephone Rack (Nuclear Power Station and Control Room)
A 900 mm telephone rack for a control room wall: a channel frame carrying four cradles with their handsets in them, one on the direct line in red, each with a small dial and a pair of lamps.
Key Cabinet (Nuclear Power Station and Control Room)
A 600 mm wall key cabinet: a painted case with three hook rails and twenty one tagged keys on them, behind a glazed door with a knob. The door swings on its own node.
Operator Chair (Nuclear Power Station and Control Room)
A five star operator chair on castors: a gas lift column, a padded seat and back on a steel frame, and two arms. Everything above the column swivels on one node.
Shift Log Desk (Nuclear Power Station and Control Room)
A 1.5 m shift log desk: a bullnosed top on a braced frame with a two drawer pedestal, the open log book and a pen tray on it, and an anglepoise lamp at the back corner. Both drawers run out on their own nodes.
Supervisor Chair (Nuclear Power Station and Control Room)
The operator chair built taller, with a high back and a headrest pad, for the supervisor at the back of the room.
Scram Button Pedestal (Nuclear Power Station and Control Room)
A floor pedestal carrying a guarded trip push: a cast base and column, a raked head with a 150 mm red mushroom, a hinged clear guard over it that lifts, a badge on the column and a blank tag under the push.
Alarm Annunciator Panel (Nuclear Power Station and Control Room)
A 1.6 m alarm annunciator: eighteen window tiles in a recessed face, some lit red and amber, with accept, reset and test pushes and a sounder grille on the bottom rail. Every window is blank, so no fault is named.
Rod Position Display (Nuclear Power Station and Control Room)
A pedestal mounted rod position display: a raked head 1 m wide carrying a forty eight cell lamp matrix with a third of the cells lit, a row of selector switches under it and a blank tag strip between them.
Mimic Wall Board (Nuclear Power Station and Control Room)
A 4 m mimic board on its own feet: a framed panel with a recessed face, raised flow lines linking abstract plant symbols and a lit lamp at every node, with a blank tag strip along the bottom.
Mimic Wall Board, Narrow (Nuclear Power Station and Control Room)
The mimic board in a 2 m width, for a shorter wall or a single system panel beside the desk.
Analogue Dial Bank (Nuclear Power Station and Control Room)
A 1.1 m instrument panel 2 m tall carrying twelve bezelled analogue dials in a recessed fascia, with three edgewise meter windows below them and a blank tag strip along the bottom.
Curved Control Desk (Nuclear Power Station and Control Room)
A three bay control desk on a 2.6 m arc, 4.6 m across the ends: each bay a plinth and carcass with a postformed bench top, a raked switch fascia and an upright instrument head carrying dials, lamp tiles and blank tag strips, with two rocking selector levers on the middle bay.
Switch Panel Console (Nuclear Power Station and Control Room)
A 1.2 m floor standing switch panel 2.1 m tall: a recessed fascia with four rows of toggle switches and indicator lamps, a row of dials across the head, blank tag strips and a hinged back door for the wiring.