Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
6,779 free GLB models
AnimatedPunching Bag on Weighted Stand (Gym and Fitness Studio)
A 2.05 m free-standing heavy bag: a weighted drum base with bumper plates leant against it, a tubular upright and a cranked top arm, and a 1.05 m vinyl bag on a four-strap swivel. The bag swings on its swivel; the base and arm are fixed.
Folded Gym Towel (Gym and Fitness Studio)
A folded gym towel, 340 by 240 mm and three layers deep, with the layers offset a few millimetres so the stack reads as cloth rather than a block.
Suspension Trainer Frame (Gym and Fitness Studio)
A free-standing 2.3 m suspension trainer frame: two splayed A-frames on foot rails, a 1.6 m top bar and two webbing straps with moulded handles hanging from anchor rings. The straps are fixed geometry, because webbing under load is not a rigid node.
Grid Foam Roller (Gym and Fitness Studio)
A 450 mm hollow-core foam roller with a moulded grid of raised blocks around a rigid inner tube, lying along X on the floor.
Yoga Mat, Unrolled (Gym and Fitness Studio)
The same exercise mat unrolled on the floor, 1.78 m by 620 mm and 7 mm thick, with the last turn of the roll left standing at the far end.
Yoga Mat, Rolled (Gym and Fitness Studio)
A 620 mm rolled exercise mat with a loose outer wrap and two carry straps, lying on its side ready to be picked off a rack.
Three-in-One Plyo Box (Gym and Fitness Studio)
A plywood plyo box, 750 by 500 by 600 mm, with chamfered corner battens, a grip strip on the top face and hand holds on both long sides, so it can be turned onto any of its three faces for a different step height.
Medicine Ball Rack, Loaded (Gym and Fitness Studio)
A 1 m three-tier medicine ball rack on a raked tubular frame, loaded with nine rubber wall balls from 4 to 10 kg nested between cradle rails.
Battle Ropes and Wall Anchor (Gym and Fitness Studio)
A pair of 15 m battle ropes laid in a lazy S from a two-ring wall anchor, with whipped gripped ends. The ropes are fixed geometry in a resting wave: a rope is not reachable with a rigid node transform, so it is modelled as it lies.
Cable Crossover Frame (Gym and Fitness Studio)
A 3.4 m cable crossover frame: two floor-mounted towers on a spanning beam, four carriage pulleys on their tracks with parked handles, and a knurled chin-up bar slung under the beam.
Adjustable Bench, Inclined (Gym and Fitness Studio)
The same adjustable bench with its back section set to a 45 degree incline on the ladder bracket. The incline is baked into the geometry, so the model needs no rig to read as adjusted.
Adjustable Bench, Flat (Gym and Fitness Studio)
An adjustable weight bench with the back section laid flat: a two-piece vinyl pad on a tubular frame with a notched ladder bracket under the back, rubber feet and a 460 mm seat height.
Power Rack (Gym and Fitness Studio)
A 2.3 m four-post power rack with numbered hole patterns, a knurled pull-up bar across the front, two J-hooks, full-length safety arms and a loaded Olympic bar racked at working height. Static geometry: the J-hooks and safeties are modelled where a lifter would set them.
Forty-Five Degree Leg Press (Gym and Fitness Studio)
A plate-loaded 45 degree leg press: a raked twin-rail carriage with a ribbed footplate, a reclined back pad and seat, shoulder rests and two loading horns carrying 20 kg bumper plates.
Flat Utility Bench (Gym and Fitness Studio)
A 1.24 m flat utility bench: a crowned vinyl pad on a welded tubular tripod frame with rubber feet, at the 450 mm seat height a dumbbell or barbell press is worked from.
AnimatedLat Pulldown Station (Gym and Fitness Studio)
A 2.2 m lat pulldown with a twelve-plate selectorised stack on guide rods, a cantilevered top pulley, an angled lat bar, a padded seat and adjustable thigh pads. The stack lifts and returns on its rods; the cable is fixed geometry, because a cable that bends is not a rigid node.
AnimatedStudio Spin Bike (Gym and Fitness Studio)
A studio spin bike with an exposed weighted flywheel, a heavy tubular frame, a saddle and bar on quick-release posts, a resistance lever and a compact console. The flywheel spins and the console tips; the belt drive is fixed geometry.
AnimatedUpright Exercise Bike (Gym and Fitness Studio)
An upright exercise bike on stabiliser feet: a shrouded flywheel, a padded saddle on an adjustable post, swept handlebars with rubber grips, a crank set with pedals and a tilting console. The flywheel spins and the console tips; the drive belt inside the shroud is fixed geometry.
AnimatedAir Rowing Machine (Gym and Fitness Studio)
A 2.4 m air rower: a caged flywheel on a front tower, an aluminium monorail, a padded seat on rollers and pivoting footplates. The seat slides and the flywheel spins; the chain and handle strap are fixed geometry.
AnimatedCommercial Treadmill (Gym and Fitness Studio)
A 2.05 m commercial treadmill: a cushioned running deck between side rails, a motor cowl, tubular uprights with rubber-gripped handrails and a tilting console head on its mount. The belt itself is fixed geometry, because a running belt is a loop no rigid node transform can drive.
Weight Plate Tree, Loaded (Gym and Fitness Studio)
A 1.4 m vertical plate tree on a three-legged base with six horns, loaded with four 20 kg bumper plates and eight smaller plates, the horns staggered up the column so plates clear each other.
Cast Kettlebell (Gym and Fitness Studio)
A 24 kg cast kettlebell, 235 mm tall, with a squared cast handle loop and a flat rubber base ring so it stands square on a rubber floor.
Bumper Plate Stack (Gym and Fitness Studio)
Six bumper plates stacked flat on the floor, three 20 kg, two 10 kg and one 5 kg, each turned a little against the one below so the stack reads as loose rather than machined.
Kettlebell Rack, Six Bells (Gym and Fitness Studio)
A 1.1 m two-tier kettlebell rack carrying six cast bells from 12 to 32 kg on rubber-lined shelves, on a raked tubular frame with levelling feet.