Free models · Game-ready GLB
Props
Every realistic prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
7,779 free GLB models
Butler sink 600 (Home Appliances and Utility Room)
A 600 mm fireclay butler sink: a thick walled rectangular body with a fluted apron, a deep hollow bowl with a weir overflow, and a strainer waste with a bottle trap.
Inset 1.5 bowl sink with drainer (Home Appliances and Utility Room)
A 1.0 m inset one and a half bowl sink: main bowl, shallow rinse bowl, seven pressed drainer grooves, a rolled deck edge, a mixer tap and a linked waste run.
Inset double bowl sink 960 (Home Appliances and Utility Room)
A 960 mm inset double bowl sink: a pressed deck with two real apertures and a rolled edge, a full bowl and a half bowl each with a waste boss, a ribbed drainer, a single lever mixer tap and a linked bottle trap.
Pull-out mixer tap (Home Appliances and Utility Room)
A 400 mm pull-out kitchen mixer tap: flanged base, high swan spout, a detachable spray head on its hose with a two-mode button, a single lever and two braided supply tails.
AnimatedSlimline dishwasher 450 (Home Appliances and Utility Room)
A 448 mm slimline dishwasher for a narrow run: the same drop-down door, gasket frame, control strip and levelling feet on a 450 mm carcass.
Dishwasher 600, door open and basket out (Home Appliances and Utility Room)
The 598 mm dishwasher with its door dropped and the lower basket pulled out on its runners, showing the stainless cavity, the cutlery basket and the mid spray arm.
Single bowl undermount sink 460 (Home Appliances and Utility Room)
A 460 mm single bowl undermount sink: hollow bowl with radiused corners, a mounting flange and four fixing clips, a strainer waste and a bottle trap with a run to the wall.
Integrated dishwasher 600 (Home Appliances and Utility Room)
A 598 mm integrated dishwasher supplied for a decor door: open front aperture with a gasket land, two wire baskets on named runners, a spray arm, decor-door mounting rails and a top edge control strip.
AnimatedDishwasher 600 (Home Appliances and Utility Room)
A 598 mm freestanding dishwasher: drop-down door on a bottom hinge line with a gasket frame, a control strip and display, a full-width bar handle, a plinth panel and levelling feet, with supply and waste hoses at the back.
Built-in combination microwave 600 (Home Appliances and Utility Room)
A 595 mm built-in combination microwave for a tall housing: trim flange, a side hinged glazed door with a bar handle and screen frame, and a control column with a rotary selector, keys and a display.
AnimatedBuilt-in steam oven 600 (Home Appliances and Utility Room)
A 595 mm built-in compact steam oven: a pull-out water tank in the fascia, a rotary selector with touch keys and a display, and a side hinged glazed door with a vertical bar handle.
Countertop microwave 500 (Home Appliances and Utility Room)
A 500 mm countertop microwave on moulded feet: a glazed door with a perforated screen frame, a vertical bar handle, a nine key control column with a display and a side vent grille.
AnimatedIntegrated telescopic hood 600 (Home Appliances and Utility Room)
A 600 mm telescopic hood built into a wall unit: an open cassette body with two grease filters, a discharge spigot, and a pull-out visor on a named slide axis carrying the control slider.
Downdraft extractor 900 (Home Appliances and Utility Room)
A 900 mm downdraft extractor shown risen behind a hob: a base plenum with a ducted outlet, and a glass fronted riser panel carrying the grease filter and grab lip. The riser is named but static: it is modelled risen and the stowed pose does not exist.
AnimatedUnder cabinet visor hood 600 (Home Appliances and Utility Room)
A 600 mm under cabinet visor hood: a slim chamfered body with two mesh filters and a discharge spigot, and an angled visor flap on a named top hinge line with three slide controls.
Induction hob, four zone (Home Appliances and Utility Room)
A 590 mm four zone induction hob: full-surface glass on a pressed steel tray, printed zone rings with power dots, a touch slider and key group, and an underslung electronics box with a mains tail.
Island extractor hood 900 (Home Appliances and Utility Room)
A 900 mm island extractor hood suspended over a hob: a deep box canopy with four grease filters and four lamps, a square flue rising to a ceiling plate, and a display with touch keys on the front face.
Domino hob pair (Home Appliances and Utility Room)
A pair of 290 mm domino hob modules side by side: a single wok burner with its own square trivet, and a ribbed cast griddle plate in a stainless surround, each with its own control knob.
Chimney extractor hood 600 (Home Appliances and Utility Room)
A 600 mm chimney extractor hood: a tapered stainless canopy with a rolled rim, three baffle grease filters, two lamps, a two section telescopic flue with a discharge grille and slide controls on the front lip.
Ceramic hob, four zone (Home Appliances and Utility Room)
A 590 mm four zone ceramic hob with a stainless surround frame: printed dual radiant rings, four front touch keys and a residual heat indicator.
Gas hob, five burner (Home Appliances and Utility Room)
An 860 mm five burner gas hob: sealed burners with spreaders and enamelled caps, three cast iron pan supports, a pressed stainless deck with a rolled edge, five front control knobs and a gas inlet tail.
AnimatedBuilt-in single oven 600 (Home Appliances and Utility Room)
A 595 mm built-in single oven for a tall or base housing: trim flange and fixing lugs, a two knob and touch fascia with a display, and a glazed drop-down door with a full-width bar handle.
AnimatedRange cooker 900, main oven open (Home Appliances and Utility Room)
The 900 mm range cooker with its main oven door dropped forward on the bottom hinge line, showing the enamelled cavity and two wire shelves.
AnimatedWarming drawer 140 (Home Appliances and Utility Room)
A 595 mm warming drawer 140 mm high for a housing stack: trim flange, a push-pull glass front pivoted on its slide axis and a status lamp.