Free models · CC0
Props
Every sci-fi prop below is a self-contained .glb under 25 MB, released under CC0 1.0 so it can be used and modified in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
203 free GLB models
AnimatedFloor maintenance hatch (Spaceship Interior Deck Kit)
A 1.1 m floor hatch frame with a lifting steel lid hinged along its back edge.
Conduit corner (Spaceship Interior Deck Kit)
Three conduits turning a right angle from south (-Z) to east (+X) over a corner stand.
AnimatedReactor core (Spaceship Interior Deck Kit)
A 3.5 m reactor column in a six-post cage with two counter-rotating containment rings.
AnimatedHolographic table (Spaceship Interior Deck Kit)
A round briefing table with a rotating ship hologram over its lit centre.
Command chair (Spaceship Interior Deck Kit)
A high-backed command chair on a steel column with armrest touch panels.
Command platform step (Spaceship Interior Deck Kit)
A 3 by 2 m raised step, 0.2 m high, with a lit front edge for the command chair.
Wall console (Spaceship Interior Deck Kit)
A wall-mounted terminal 0.7 m wide with a screen and five keys.
Engineering console (Spaceship Interior Deck Kit)
A standing control console with a steeply raked screen, three levers and a fault lamp.
Wall display, 2 m (Spaceship Interior Deck Kit)
A 2 by 1.2 m wall display on a short bracket.
Crew seat (Spaceship Interior Deck Kit)
A low-backed pedestal seat for consoles and the mess.
Helm console (Spaceship Interior Deck Kit)
A five-station curved helm, screens facing the pilot on the +Z side.
Console station (Spaceship Interior Deck Kit)
A single crew station: pedestal desk, sloped display and a lit keyboard, user side toward +Z.
Craft support cradle (UFO Crash Site and Recovery Facility)
A 9 m steel cradle holding a disc craft clear of the floor: four A-frame legs on concrete pads tied by a base ring and diagonal braces, four raked saddles with padded top plates and side stops, a hazard band and a four-tread access stair with rails.
Sample rack wall (UFO Crash Site and Recovery Facility)
A 2.4 by 2.3 m sample rack: six shelf levels carrying twenty four trays of capped vials, blank shelf labels and a closed top plate.
Analysis bench (UFO Crash Site and Recovery Facility)
A 2.8 m laboratory bench: a cupboard base with three drawer lines, a fume hood with a glass sash and extract duct over the left half, a reagent shelf, an instrument case, a microscope, four capped sample vials and two stools.
Control console bank (UFO Crash Site and Recovery Facility)
A five-position curved console bank on a 3.6 m radius: raked instrument panels with lit faces, upright screens, keyboard shelves, a cable tray under the desks and two five-star operator chairs.
Cryogenic pod (UFO Crash Site and Recovery Facility)
A 2.6 m cryogenic pod on a steel cradle at 9 degrees head-up: a rounded outer shell, a frosted lid on a hinged node, a foot-end compressor with coiled lines and two lit control panels.
Examination table (UFO Crash Site and Recovery Facility)
A 2.3 m stainless examination table on a pedestal column and ram: a dished top with side rails, a centre drain channel running to a floor sump, an articulated two-link overhead lamp on its own floor post and a three-shelf instrument trolley on castors.
Specimen tank, empty (UFO Crash Site and Recovery Facility)
A 3 m containment tank standing empty: a machined plinth, a double glass cylinder over a lit fluid column, a bolted cap, three service pipes with valve blocks and a status panel.
Specimen tank with suspended mass (UFO Crash Site and Recovery Facility)
The same tank with an abstract dark mass suspended in the column. The mass is a smooth non-representational form, not an organism.
Cargo net and slings (UFO Crash Site and Recovery Facility)
Lifting tackle laid out on the ground: a folded cargo net of nine by seven cords over a low pile, four coiled strops with thimbles and shackles, a master link and two spreader bars.
Transport crate (UFO Crash Site and Recovery Facility)
A 6.2 m ribbed steel transport crate for a recovered hull section: corrugated sides, eight corner castings with lifting eyes, latching bars, a hazard chevron band and a blank data plate.
Survey marker set (UFO Crash Site and Recovery Facility)
Six folded evidence markers with blank number plates, six flagged survey stakes, a banded ranging pole and a tape reel, arranged as a working set over a 4 m area.
Sensor tripod (UFO Crash Site and Recovery Facility)
A 2 m survey tripod with footed legs, a spreader brace, an instrument head with a lens and a status lamp, a whip antenna and a battery case on the ground.