Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,517 free GLB models
AnimatedStaff kitchenette run (Office Lobby and Building Facilities)
A 1.8 m staff kitchenette run: an 18 mm carcass on a recessed plinth with an inset stainless sink and pillar mixer, a postformed worktop and splashback, two doors, a three-drawer bank, an appliance void and a wall cupboard row with an accent light channel.
Floor power distribution unit (Office Lobby and Building Facilities)
A 0.34 m by 1.8 m floor power distribution unit: a chamfered column on a plinth with a metering display, five outlet banks of six sockets, a louvred vent and a top cable gland.
Patch panel, 24 port (Office Lobby and Building Facilities)
A 0.485 m 24-port patch panel with rack ears: two rows of twelve chamfered outlets with accent port markers and a front cable management bar with five formed cable hoops.
AnimatedWall-mount comms cabinet (Office Lobby and Building Facilities)
A 0.62 m by 0.66 m wall-mount comms cabinet 0.42 m deep: a welded case with two mounting rails, a patch bank and two switches, a roof extract grille and a glazed hinged door as a named pivoted node.
Rack shelf and console unit (Office Lobby and Building Facilities)
A 0.55 m 19-inch cantilever shelf stack 0.76 m tall: three vented shelves on two punched stiles carrying two appliances, with a fold-out console screen and key deck on top.
Twin toilet roll dispenser (Office Lobby and Building Facilities)
A 0.34 m twin toilet roll dispenser: a chamfered stainless hood on a back plate over two loaded rolls on spindles, with a core cover, a tear bar and a blank accent label.
AnimatedBaby change unit (Office Lobby and Building Facilities)
A 0.86 m by 0.5 m wall-mounted baby change unit shown deployed: a chamfered wall cabinet with an accent instruction panel and a dished changing tray on two struts and a safety strap, as a named node pivoted on its lower hinge line.
Grab rail set (Office Lobby and Building Facilities)
A 0.6 m horizontal and 0.5 m vertical grab rail set: 36 mm rails on three chromed wall flanges with spacer spigots.
AnimatedPedal sanitary bin (Office Lobby and Building Facilities)
A 0.24 m pedal sanitary bin 0.54 m tall: a tapered chamfered body, a hinged lid as a named pivoted node, a foot pedal on a linkage bar and an accent status strip.
AnimatedPaper towel dispenser (Office Lobby and Building Facilities)
A 0.3 m by 0.42 m paper towel dispenser: a chamfered cabinet, a dispense throat and a hinged front cover as a named pivoted node with a key barrel.
Soap dispenser (Office Lobby and Building Facilities)
A 0.12 m by 0.22 m wall soap dispenser: a chamfered body with a level window, a push lever and a nozzle on a back fixing plate.
Wall hand dryer (Office Lobby and Building Facilities)
A 0.3 m by 0.36 m wall hand dryer: a chamfered wedge body with a nozzle slot, a louvred inlet grille, a status lamp and a back fixing plate.
Washroom mirror run (Office Lobby and Building Facilities)
A 1.6 m by 0.9 m washroom mirror run: a laminated glass panel in a chamfered stainless frame with an accent light band and a top light housing.
Wall-hung WC pan (Office Lobby and Building Facilities)
A 0.36 m by 0.54 m wall-hung WC pan: a moulded ceramic bowl with a real cavity, a shrouded rear trap, a chamfered seat ring with two hinges and a duct flush plate above.
Single basin vanity unit (Office Lobby and Building Facilities)
A 0.62 m single basin vanity unit at 890 mm: a chamfered carcass on a recessed plinth with a handleless rail, a solid-surface top, a countertop basin with a real cavity, a pillar mixer tap and a back upstand.
Vanity trough with two basins (Office Lobby and Building Facilities)
A 1.7 m vanity trough at 900 mm: a moulded trough basin inset in a solid-surface deck built as four rails, an apron and back upstand, a welded steel frame, two pillar mixer taps and two waste grates with bottle traps.
Urinal divider panel (Office Lobby and Building Facilities)
A 0.42 m deep urinal divider panel 1.1 m tall: a chamfered board with a raked leading edge on a wall bracket plate, two fixing spigots and a chromed floor support leg.
Wall-hung urinal (Office Lobby and Building Facilities)
A 0.36 m wall-hung urinal 0.66 m tall: a moulded ceramic bowl with a real dished cavity, a chromed spreader, a domed waste grate, a flush pipe spigot and a back fixing panel.
Wall-mounted corridor handrail (Office Lobby and Building Facilities)
A 1.2 m wall-mounted corridor handrail: a 46 mm stainless tube on three bracket plates with domed returns at both ends.
Lift floor indicator (Office Lobby and Building Facilities)
A 0.38 m by 0.2 m lift floor indicator: a chamfered stainless surround, a dark display face, a lit digit panel and a direction arrow lens.
Lift call panel (Office Lobby and Building Facilities)
A 0.16 m by 0.44 m lift call panel: a brushed back plate, a recessed button plate with up and down buttons and a small position display.
Visitor cubby unit (Office Lobby and Building Facilities)
A 0.9 m by 0.8 m open visitor cubby unit: a chamfered carcass divided into nine compartments with recessed dark backs and a timber capping top.
Retractable belt queue post (Office Lobby and Building Facilities)
A 0.98 m retractable belt queue post: a weighted chamfered base, a stainless column, a four-way belt cassette head and an accent belt tongue.
Lobby planter trough (Office Lobby and Building Facilities)
A 1.2 m by 0.4 m lobby planter trough 0.58 m high: a tapered vessel with a timber capping rim, an internal drainage grille and a recessed plinth. Supplied empty; planting comes from a nature pack.