Free models · Game-ready GLB
Props
Every modern prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
8,517 free GLB models
Life ring on a post (Cruise Ship Deck and Lounge)
Deckside rescue post 1.45 m tall: a white post on a bolted plate carrying a red and white life ring on its bracket, a coiled buoyant line below it and a blank instruction plate, for the rail line of any open deck.
Mooring bollard with rope eye (Cruise Ship Deck and Lounge)
Twin bitt mooring bollard 0.9 m tall: two white steel posts with turned heads on a bolted base plate, a cross bar between them and a laid rope eye dropped over one post, for the mooring stations at a ship's ends.
AnimatedAnchor windlass (Cruise Ship Deck and Lounge)
Foredeck windlass 3.2 m wide: a grey bed with a pocketed cable lifter that turns, a chain stopper with its bar, a length of stud link cable running to the spurling pipe, the hydraulic motor housing and a control pedestal with blank gauges.
AnimatedMooring winch (Cruise Ship Deck and Lounge)
Deck mooring winch 2.6 m wide: a grey machinery bed carrying a flanged rope drum that turns, a warping head, the band brake wheel, a guard and a control stand, with a coil of laid rope on the drum modelled solid.
AnimatedDeck hatch with hinged lid (Cruise Ship Deck and Lounge)
Flush deck hatch 1.5 m square: a raised yellow coaming with a charcoal gasket seat and a white steel lid on its hinge bar, with six dogs, a grab handle and a stay, for access to the spaces under an open deck.
Muster station board (Cruise Ship Deck and Lounge)
Muster station sign 2.2 m tall on two posts: a white board in a navy frame with a red header band and a recessed charcoal plan panel, both faces left completely blank so a project prints its own station letter and deck plan onto them.
Liferaft canister rack (Cruise Ship Deck and Lounge)
Inclined liferaft cradle 2.9 m wide: four white glassfibre canisters in a galvanised rack on a red launch cradle, with the lashing band, the hydrostatic release box and a blank instruction plate, for the muster side of an open deck.
LED grow bar fixture (Vertical Farm and Hydroponics Tower)
A single 1.8 m LED grow bar: an extruded aluminium body with end caps, a magenta emitting face, the driver box on top and two hanger eyes. Emissive looking geometry only, with no light source in the file.
AnimatedLocker run (Vertical Farm and Hydroponics Tower)
A four door staff locker run 1.6 m wide on a plinth: perforated vent panels, a sloped top so nothing is stored on it, blank card readers and four doors that open on their own hinges.
Gowning bench (Vertical Farm and Hydroponics Tower)
A 1.6 m gowning bench for the changing lobby: a slatted seat with a shoe rack under it, a coat rail of clean coveralls behind, a hairnet and glove dispenser pair and a waste bin at the end.
AnimatedHygiene station with boot wash (Vertical Farm and Hydroponics Tower)
The entry hygiene station: a stainless hand wash trough with sensor taps and two blank dispensers, a grab rail, and a boot wash pit alongside with two upright brushes that turn and a drained grating.
AnimatedTray trolley (Vertical Farm and Hydroponics Tower)
A six shelf tray trolley on braked castors: grow trays at half and full crop on the shelves, a push handle at each end and a bumper rail round the base. Every shelf tray runs out on its channels.
Monitoring tablet on a stand (Vertical Farm and Hydroponics Tower)
A floor stand with a tablet at chest height on a tilting bracket, its screen blank and dark, a cable clip down the column and a weighted disc foot, as a grower keeps beside the packing line.
Environment sensor pole (Vertical Farm and Hydroponics Tower)
A 2.4 m sensor pole on a weighted foot: a radiation shielded temperature and humidity head, a carbon dioxide head, a light sensor on its arm and a junction box with the cable entries, all blank.
AnimatedControl cabinet (Vertical Farm and Hydroponics Tower)
A 1.2 m plant control cabinet on a plinth: two hinged doors, a blank touch screen and a row of unlabelled indicator lamps on the right door, gland plate at the foot and a beacon on top. The doors open on their hinges.
AnimatedCarbon dioxide cylinder rack (Vertical Farm and Hydroponics Tower)
A six cylinder carbon dioxide rack against the wall: cylinders in two rows behind a restraint bar, a two stage regulator manifold with its blank gauges, a handwheel isolation valve and a warning plate left blank.
AnimatedAir handling unit (Vertical Farm and Hydroponics Tower)
A 2.4 m packaged air handling unit on a plinth: filter, coil and fan sections, a hinged access door with a sight port, the supply fan behind the guard turning, and spigots on both ends for the duct run.
AnimatedGrow room dehumidifier (Vertical Farm and Hydroponics Tower)
A floor standing grow room dehumidifier on castors: a louvred discharge with a fan behind it that spins, a condensate drawer that pulls out at the foot, a blank humidity readout and the drain hose spigot at the back.
AnimatedReverse osmosis rack (Vertical Farm and Hydroponics Tower)
A framed reverse osmosis set: six membrane vessels in two banks on a galvanised frame, the high pressure pump at the foot with a turning rotor, a pre filter pair, a handwheel on the concentrate line and a blank instrument panel.
AnimatedPump and filter set (Vertical Farm and Hydroponics Tower)
A skid of two centrifugal circulation pumps on their plinth with a duty and standby arrangement, two sand filters on legs beside them, isolation handwheels either side and a pressure gauge board. The pump rotors and the handwheels turn.
AnimatedNutrient reservoir tank (Vertical Farm and Hydroponics Tower)
A 2 m by 1.4 m nutrient reservoir: a white tank 1.2 m deep on a bunded plinth with the solution level modelled, an inspection lid that lifts, a sight glass up one end and the suction and return flanges on the near face.
AnimatedNutrient dosing skid (Vertical Farm and Hydroponics Tower)
A skid mounted dosing set: three stock tanks of concentrate and acid on a bunded base frame, four peristaltic dosing pumps whose rotors turn, a mixing manifold with a handwheel valve and a blank control fascia.
UV steriliser (Vertical Farm and Hydroponics Tower)
An inline ultraviolet steriliser: a stainless chamber on a wall frame with the lamp end caps, the flow in and out flanges, a blank hour counter box and the ballast enclosure under it.
AnimatedWash and spin station (Vertical Farm and Hydroponics Tower)
A 2 m wash line: a deep stainless wash sink with the water modelled, a swan neck tap, and a spin dryer alongside whose lid lifts and whose perforated basket spins, with a drained crate on the drainer.