Free models · Game-ready GLB
Props
Every realistic prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
7,779 free GLB models
Double Bed Upholstered (Bedroom and Living Room Furniture)
Upholstered 160 cm double bed with a buttonless seamed headboard, mattress and two pillows.
Visitor Tasting Counter (Distillery and Bonded Warehouse)
Visitor tasting counter 2.8 x 1.1 m and 1.8 m to the back shelf: a cask staved oak front with iron bands, a plank top, six nosing glasses on a tray, a water jug, two unlabelled bottles and seven more glasses upended on the shelf behind. Nothing carries a label.
Pallet of Casks (Distillery and Bonded Warehouse)
Four barrels stood on end on a 1.5 x 1.2 m timber pallet and strapped in two bands, 1.05 m tall overall. Every head is blank. Ready for a lorry bed, a loading bay or a corner of a filling store.
AnimatedCharring Drum (Distillery and Bonded Warehouse)
Charring drum 2.2 m between frames and 1.7 m tall: a perforated iron drum 1.5 m long turning on a shaft over a hearth pan and fire bars, in a braced frame with a crank handle at one end. The fire is not modelled; the drum turns on its axis.
Hoop Stack (Distillery and Bonded Warehouse)
Stack of iron cask hoops on a timber pallet, 1.5 x 0.9 m and 0.65 m tall: seven wide chime hoops in one pile, six smaller ones in another and three more leaning against them. Cooperage stock; the hoops are one static body each.
Stave Bundle (Distillery and Bonded Warehouse)
Bundle of sawn oak staves 0.75 m across and 1.5 m tall, stood on end and tied with two iron hoops, with five more staves laid flat beside it. Raw cooperage stock for a yard, a stave store or a cooperage floor.
AnimatedStencil Bench (Distillery and Bonded Warehouse)
Stencil bench 1.6 x 0.75 m and 0.88 m to the top: an oak bench with a back board, four blank stencil plates hung on it, a stack of blanks and an ink tray on the top, two brushes and a drawer of spare plates below. Every plate is cut with nothing at all.
AnimatedCask Hoist Rail with Chain Block (Distillery and Bonded Warehouse)
Overhead hoist 4.2 m between posts and 3.7 m to the top of the rail: two braced posts on pads, a rolled beam and a chain block on its trolley whose body and hook lift on the rail. The hand chain and the fall are one static body, because chain links need a joint each.
AnimatedRacking Bench (Distillery and Bonded Warehouse)
Filling store racking bench 2.0 x 0.85 m and 0.92 m to the top: an oak bench on a braced frame, a let in drip tray, a standard carrying the filling head and its cock, a drawer of fittings on runners and loose bungs on the top.
Dunnage Cask Stack (Distillery and Bonded Warehouse)
Three hogsheads stacked two over one on timber runners, 2.4 x 1.0 m and 1.7 m tall, with chocks between the tiers and a wedge at each end. Every head is blank. The way a dunnage floor is filled where there is no rack.
Cask Rack, Three Tier (Distillery and Bonded Warehouse)
Timber dunnage rack 2.4 m long and 3.1 m tall: two braced end frames on stone pads, a head beam and three tiers of paired runners with oak chocks, each tier taking two casks. The full height a dunnage floor is racked to, and it lays end to end with the two tier rack.
Cask Rack, Two Tier (Distillery and Bonded Warehouse)
Timber dunnage rack 2.4 m long and 2.1 m tall: two braced end frames on stone pads, a head beam and two tiers of paired runners with oak chocks on them, each tier taking two casks lying on their sides. Racks lay end to end down a warehouse floor.
Cask End, Blank Stencil (Distillery and Bonded Warehouse)
Loose oak cask head 0.88 m across on a low timber stand, leaning back so the face is in view: boarded head, a chime hoop and a blank stencil plate propped beside it. The face is deliberately empty, with no name, number, date or mark of any kind on it.
Cask, Barrel (Distillery and Bonded Warehouse)
Oak barrel 0.88 m long and 0.62 m across the bilge, lying on its side: six driven iron hoops, recessed blank heads and a bung in the bilge. The smallest of the three cask sizes, and the one a single person can roll and upend.
Cask, Butt (Distillery and Bonded Warehouse)
Oak butt 1.35 m long and 0.98 m across the bilge, lying on its side: six driven iron hoops, recessed heads at both ends and a bung in the bilge. Both heads are completely blank, with no stencil, mark or lettering anywhere on the cask.
Cask, Hogshead (Distillery and Bonded Warehouse)
Oak hogshead 1.05 m long and 0.76 m across the bilge, lying on its side: six driven iron hoops, recessed blank heads and a bung in the bilge. The middle size between the butt and the barrel, for racking three high in a dunnage warehouse.
Hose Point (Distillery and Bonded Warehouse)
Galvanised hose point 1.45 m tall on a concrete pad: a standpipe with two valved outlets on swan bends, handwheel rings, a vent at the head and a drip tray at its foot. The handwheels are modelled as part of the fitting and do not turn.
Hydrometer Set (Distillery and Bonded Warehouse)
Hydrometer set on a 0.66 x 0.8 m bench footprint: a lined tray holding three brass hydrometers with their weights, a glass test jar with a brass foot and a thermometer, beside the closed fitted case they live in. No scale or lettering is drawn on any instrument.
Filling Store Hose Reel (Distillery and Bonded Warehouse)
Wall mounted hose reel 0.8 m across on a bracket plate: a painted drum of coiled hose on its spindle, a crank handle, a guide and a brass filling nozzle led off to the floor. The hose and its coils are one static body, because a flexible line needs a joint per element.
AnimatedSample Cabinet with Glassware (Distillery and Bonded Warehouse)
Glazed sample cabinet 1.25 m wide and 2.1 m tall: a timber press with three shelves of unmarked jars, measures and graduated cylinders behind two glazed doors that open on their outer stiles, with brass knobs and a blank plate over the cornice.
Control Panel (Distillery and Bonded Warehouse)
Painted control cubicle 1.8 m wide and 2.1 m tall on a cast plinth: six blank faced dials, five indicator lamps, a row of levers on a sloped desk, an unlettered plate and the cable gland in the back. Every face and label surface is deliberately empty.
AnimatedPipework Run with Valves (Distillery and Bonded Warehouse)
Four metre pipework bay on two stanchions, 2.3 m tall: three lines in copper, stainless and brass on flanged joints, an elbow taking the middle line down and away on a wall bracket, and two gate valves whose handwheels turn. Lays end to end with more bays.
Fuel Hopper (Distillery and Bonded Warehouse)
Steel fuel hopper 2.1 x 1.7 m and 4.3 m tall on a braced gantry: a square bin over a four way hopper, a gate box at the throat, a chute running down to a boiler front and a heaped load of solid fuel in the top. The gate does not move.
Steam Line with Trap (Distillery and Bonded Warehouse)
Four metre lagged steam main at 2.1 m on two hangers: flanged at both ends, with a drop leg taking condensate into a bucket trap, an isolating cock and the discharge running away at low level. Bays lay end to end. No steam is modelled.