Free models · Game-ready GLB
Props
Every stylized prop below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole props set from the packs.
2,090 free GLB models
Racing Helmet (Go Kart Track and Pit Lane)
Single full face karting helmet 0.33 m across, red shell with a dark visor band, a chin bar and a small rear spoiler, resting on its own padded ring so it sits level on a shelf, a bench or a tyre stack.
Race Suit on a Hanger (Go Kart Track and Pit Lane)
A single red race suit on a hanger on a weighted floor stand 1.9 m tall, with a black chest band, a yellow flash and a wire hook over the rail. One rigid piece: the suit is solid geometry and does not drape or move.
Helmet and Race Suit Rack (Go Kart Track and Pit Lane)
Hire kit rack 1.9 m wide: two race suits on hangers under a helmet shelf holding two helmets, with a boot shelf below and a welded steel frame. Suits and helmets are modelled solid and none of it moves.
Driver Briefing Board (Go Kart Track and Pit Lane)
Free standing briefing board on an A frame: a white 1.9 m panel under a red header, with a track map blocked out on the left, four ruled lines on the right and a pen tray along the bottom. Markings are plain shapes and carry no wording.
AnimatedScoring Screen on a Stand (Go Kart Track and Pit Lane)
Live timing screen 3.7 m tall on a concrete footing and two braced posts: a charcoal case with a blue panel and five yellow result rows, hung on a head rail so the whole screen tilts to the crowd on its own pivot.
AnimatedAir Line Reel (Go Kart Track and Pit Lane)
Free standing air line reel on a 2.1 m post: a red drum on a bracket that spins on its own pivot, a blue hose run down to the gun and a compressor box at the foot. The hose itself is one rigid solid, so it does not pay out with the drum.
Fuel and Charging Station (Go Kart Track and Pit Lane)
Bunded refuelling and charging point on a kerbed concrete plinth: a red fuel cabinet with a nozzle on its hose, a blue charge post with two leads and a canopy plate, and a fire point. Hoses and leads are modelled solid and do not move.
Tool Trolley (Go Kart Track and Pit Lane)
Red four drawer tool trolley on four castors with a steel worktop, a push handle and a few tools left on the lid. Drawers and castors are modelled solid on this one and do not open or turn; the pit garage bay is what carries a moving part.
Tyre Stack (Go Kart Track and Pit Lane)
Stack of five kart tyres 1.1 m high with a red and a blue marker tyre banded through it, a yellow cap disc on top and a strap rod down the side. Fits the tyre wall family, so a paddock stack and a barrier read as the same rubber.
Kart Storage Rack (Go Kart Track and Pit Lane)
Two tier steel storage rack 1.5 m wide holding two hire chassis, one red and one blue, on runner shelves with edge lips and a red top rail. The stored chassis are simplified to tray, seat, nose and wheels and do not move.
Track Sign Set (Go Kart Track and Pit Lane)
Pair of circuit signs on concrete footings: a 2.1 m post with a yellow chevron board and a red warning plate, and a 1.6 m post with a blue direction arrow. Symbols are plain shapes and name no series, circuit or maker.
Bollard Cone (Go Kart Track and Pit Lane)
Tall 0.84 m bollard cone on a heavy square base with two white bands, for a pit entry, a lane split or a closed gate. Same family as the apex cone, scaled up and double banded so it reads from a distance.
Apex Marker Cone (Go Kart Track and Pit Lane)
Small red apex cone 0.37 m tall on a square weighted base with a white reflective band, the marker a clerk drops on an apex or a braking point. Static geometry; the cone is one solid, so it never tips.
Spare Seat and Steering Wheel Rack (Go Kart Track and Pit Lane)
Paddock spares rack 1.6 m wide: two bucket seats hooked over the top rail in red and blue and two steering wheels on pegs below, on a welded steel A frame with a low kick rail. Static geometry, for dressing a garage or a workshop wall.
AnimatedKart Trolley (Go Kart Track and Pit Lane)
Empty steel kart trolley: a two rail deck 0.5 m off the floor on four legs, an end brace each end, a lower shelf rail and a red topped push handle, running on four castors that each turn on their own pivot.
AnimatedCake Stand with Dome (Street Food Market and Food Trucks)
A 580 mm cake stand: a timber plate on a steel column and a weighted base, an iced cake on it cut into sixteen with berries round the rim, and a glass dome with a timber knob hinged along its back edge. The dome opens and closes as one rigid node.
AnimatedTill and Card Reader (Street Food Market and Food Trucks)
A 340 mm counter till with a raked screen, a nine key pad with one green key and a cash drawer front that slides out, plus a card reader on its own stand beside it. Origin on the till base. Only the drawer moves; the screen and the reader are solid.
Napkin and Cutlery Caddy (Street Food Market and Food Trucks)
A 260 mm charcoal counter caddy with a yellow label, divided into two bays: a stack of white paper napkins in one and six wooden and dark handled cutlery pieces standing in the other. Origin on the caddy base. Static.
Water Butt (Street Food Market and Food Trucks)
A 1.28 m water butt: a green drum with three charcoal bands on a weighted base, a domed lid with a steel filler cap and a brass tap and lever near the bottom. The tap does not turn and the lid is part of the drum.
Fire Extinguisher Point (Street Food Market and Food Trucks)
A 1.6 m fire point: a red signage board on a charcoal base with a white pictogram panel and a yellow instruction strip, and two extinguishers, one water and one powder, standing in front of it with their hoses and handles. Static.
Gas Bottle Cage (Street Food Market and Food Trucks)
A 1.3 m gas bottle cage: a welded steel frame on a charcoal base with barred sides, four propane bottles with their valve collars inside it and a red hazard plate on the front. The cage has no door; the bottles are solid.
Crate Stack (Street Food Market and Food Trucks)
A 1.2 m stack of four market crates, each turned a little on the one below: two timber, one red and one green, all with slatted fronts and a dark interior. Dressing for the back of a stall or the side of a truck. Static.
AnimatedCool Box (Street Food Market and Food Trucks)
A 860 mm insulated cool box: a green body with a moulded rim, two charcoal carry handles and a white lid hinged along its back edge with a catch tab. The lid opens and closes; the box is solid inside.
Portable Generator (Street Food Market and Food Trucks)
A 940 mm site generator: a yellow acoustic case on a charcoal skid with a louvred side, a charcoal top panel, an exhaust stack, a red control box with a lifting handle and a painted rating plate. Static; the engine and the socket panel are solid.