3DAssets.dev

Loading model

About

A 48 by 32 m station floor built from the pack's own 4 m slabs and shown as a cutaway: there is no roof over the halls and no wall across the front, so the reactor hall, the control room and the turbine hall are all looked straight down into and walked through. At the back left, half a containment shell in two sawn sections stands round the reactor cavity, with the vessel head and its thirty seven rod drives laid down beside it under a 12 m portal crane, the hook block on the floor below. Left front, the spent fuel pond: three bays of coping round the water with two storage racks standing in it, a refuelling machine straddling it on its portal legs, and the flask, a fuel assembly on its cradle and a stand of spare rod clusters on the floor around it. Across the middle, the health physics route into the control room: an airlock pair, the hand and foot monitor, PPE lockers, the decontamination shower, the sampling glovebox, the survey bench, waste drums and the stacker. Behind the blast door, the control room: the curved desk with its chairs, the mimic boards, dial banks, the rod position display, annunciator, instrument racks, the scram pedestal, the log desk and the telephone rack. Right, the turbine hall: casing, shaft line and generator in one line over the condenser, with the feed pumps, heat exchanger, steam drum, a five bay pipe gallery, the valve bank and a walkway with handrails. Right front, the electrical plant: the transformer, the standby diesel, bus duct and cable tray runs, and the battery room and switchgear in the one roofed annex.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the asset.

Use the “Cutaway Plant Floor (Nuclear Power Station and Control Room)” asset in my project.

Model: https://cdn.3dassets.dev/assets/36945/v1/model.glb
Asset page: https://3dassets.dev/assets/nuclear-power-station-and-control-room-c-affc6d58-starter-scene
Description: A 48 by 32 m station floor built from the pack's own 4 m slabs and shown as a cutaway: there is no roof over the halls and no wall across the front, so the reactor hall, the control room and the turbine hall are all looked straight down into and walked through. At the back...

- Dimensions (X × Y × Z): 48.34 × 12.776 × 32 metres
- Triangles: 199k
- Animations: none
- Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/)
- Loading: Three.js GLTFLoader; no additional decoders required.

Also available as JSON, Markdown, or via the MCP server.

Import manually

Choose your framework, then copy the code into your project to load the asset.

import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'

const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/36945/v1/model.glb', (gltf) => {
  scene.add(gltf.scene)
})

Common questions

How do I use this model with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the model and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Three ways, from quickest to most automatic. Download the .glb with the button and drop it into your engine's asset folder, where it imports like any glTF file. Or skip the download: copy the three.js, React Three Fiber or model-viewer snippet under "Import manually", which loads the model straight from the CDN. Or connect your AI agent to the MCP server and ask for it by name, and it will find, fetch and place the model for you.

MCP server setupAPI reference

Which game engines and tools can I use this model with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. The model is a self-contained binary glTF (.glb) with textures embedded, so there is one file to import and no plugin, converter or decoder to install first.
How do I import this model into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use this model in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every model on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The .glb file has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I need Draco, Meshopt or KTX2 to load it?
No. The geometry is quantized with KHR_mesh_quantization and the textures are re-encoded to WebP, both of which three.js, Godot, Unity and Blender read natively, so a plain GLTFLoader is enough. There is nothing extra to configure and no decoder to ship with your bundle.

Cutaway Plant Floor (Nuclear Power Station and Control Room)

A 48 by 32 m station floor built from the pack's own 4 m slabs and shown as a cutaway: there is no roof over the halls and no wall across the front, so the reactor hall, the control room and the turbine hall are all looked straight down into and walked through. At the back...

Download asset · 7.5 MB

More in Environments & Scenes

Gaming Floor (Casino Floor and Back Rooms)

Gaming Floor (Casino Floor and Back Rooms)

Gaming floor demonstration: a pit of blackjack, roulette, craps and poker tables with dealer chairs and stools on patterned carpet, a slot bank and machine row beyond, a bar with back bar and lounge seating, rope stanchions marking the pit, and the cashier cage on the back...

@3dassets20.9k tris · 44 ↓
Working Fishing Harbor (Fishing Harbour and Boats)

Working Fishing Harbor (Fishing Harbour and Boats)

A complete miniature harbor with tackle shop, open boathouse, joined quay and piers, moored cabin launch, market, and fishing activity.

@3dassets46.3k tris · 44 ↓
Metro station with an island platform and units at both faces (Modern Rail and Metro Network)

Metro station with an island platform and units at both faces (Modern Rail and Metro Network)

A two track metro station: an island platform with canopies, seating, displays, a shelter, a gate line and an end ramp, slab track each side and a two car metro unit standing at each face, one with its doors open. A glazed lift shaft and a stair flight on the deck give access...

@3dassets22.5k tris · 43 ↓
Departures Concourse (Airport Terminal and Ground Operations)

Departures Concourse (Airport Terminal and Ground Operations)

A 32 by 28 metre departures concourse floored on the 4 m tile grid: a row of staffed check-in desks with self-service kiosks and bag drop units behind a managed queue, three security lanes with tray return trolleys, a gate lounge of beam seating around a gate desk, retail and...

@3dassets12.6k tris · 40 ↓
Lunar Colony Overview (Moon Base Colony and Lunar Rovers)

Lunar Colony Overview (Moon Base Colony and Lunar Rovers)

A working surface base: two tunnel junctions link a crew habitat, an inflatable dome, an observation turret, a greenhouse, a medical module, a regolith shielded habitat, an airlock and a vehicle workshop, every mate made through the hab-port interface 2.4 m above the...

@3dassets71.3k tris · 39 ↓
Resort Base Area (Ski Resort and Snow Park)

Resort Base Area (Ski Resort and Snow Park)

Base area on a 40 by 48 m tile grid: lift drive terminal with queue maze and pass gates, a 12 m cable span with two hanging chairs, lodge hall with wing, rental shop with racks, ticket office, bus stop with shuttle, groomer and slope-side furniture. Static layout; no...

@3dassets10.3k tris · 38 ↓
Checkpoint to Safehouse (Zombie Quarantine Streets)

Checkpoint to Safehouse (Zombie Quarantine Streets)

A clear3m+ inspection route through a gate and canopy towards a braced safehouse, with separated triage and supplies.

@3dassets1.4k tris · 37 ↓
Working Airfield At Dusk (Aircraft Fleet and Airfield)

Working Airfield At Dusk (Aircraft Fleet and Airfield)

A whole general aviation airfield laid out tight as one place: a 70 metre lit runway with a threshold at each end, a parallel taxiway turning north into a twenty four bay apron, a hangar built from its arch modules and closed at both ends with a light single half out of the...

@3dassets327k tris · 34 ↓
Body to Finish Line (Car Factory Production Line)

Body to Finish Line (Car Factory Production Line)

A 48 by 18 m car assembly plant built from the hall kit: nine roof trusses on twenty two steel columns, a closed back wall and both end walls with a roller shutter, a window band and personnel doors, a deck and ridge lantern roof over the back half and a mezzanine walkway...

@3dassets146k tris · 20 ↓
Walled Market Quarter (Fantasy MMO City And Townsfolk)

Walled Market Quarter (Fantasy MMO City And Townsfolk)

A hand painted fantasy city quarter inside a forty eight metre circuit of curtain wall, with a wall walk on corbels, arrow loops, four quoined corner towers, two round flanking towers, a postern in the west wall and the great gatehouse in the south wall, its portcullis and...

@3dassets303k tris · 13 ↓
Framing Cell and Press Feed (Car Factory Production Line)

Framing Cell and Press Feed (Car Factory Production Line)

A single 20 by 12 m body shop cell on the plant floor: seven skid conveyor sections carry a body in white on its carrier skid through the framing gate, three welding robots work it from inside a run of yellow guarding with an access gate, and the panel racks, blank stack and...

@3dassets50.6k tris · 12 ↓
Fortified forest outpost (FPS Survival Forest Outpost)

Fortified forest outpost (FPS Survival Forest Outpost)

A free survival game scene: a fortified scavenger outpost in dense conifer forest around a half derelict research station. A ring of timber palisade and chain link closes a 28 by 20 metre compound, with a two leaf palisade gate on the south track under a lit red lamp and...

@3dassets383k tris · 11 ↓

Similar assets

Plant Floor Slab (Nuclear Power Station and Control Room)

Plant Floor Slab (Nuclear Power Station and Control Room)

A 4 by 4 m cast floor bay 300 mm thick with chamfered edges and a recessed lifting socket at each corner. Four ports on the bay edges tile it out into a plant floor of any size.

@3dassets304 tris
Parquet Hall Floor Tile (Village Hall and Community Events)

Parquet Hall Floor Tile (Village Hall and Community Events)

A 2 m square parquet hall floor tile, 50 mm deep: a chamfered sub floor with herringbone blocks laid over it in two tones of honey and stained oak. Tiles couple on a 2 m grid, so a hall floor of any size is a run of them.

@3dassets864 tris
Plant Floor Slab, Hazard Marked (Nuclear Power Station and Control Room)

Plant Floor Slab, Hazard Marked (Nuclear Power Station and Control Room)

The floor bay with a painted chevron keep-clear marking standing 4 mm proud of the slab, for the ground under a crane hook or in front of a switchgear cubicle.

@3dassets388 tris
Plant Floor Slab with Hatch (Nuclear Power Station and Control Room)Animated

Plant Floor Slab with Hatch (Nuclear Power Station and Control Room)

The floor bay built as a kerbed frame round a 1.2 m service opening, closed by a lift-off galvanised grating cover on a steel angle kerb.

@3dassets852 tris
Plant Roof Slab (Nuclear Power Station and Control Room)

Plant Roof Slab (Nuclear Power Station and Control Room)

A 4 by 4 m roof bay: a 240 mm slab on two downstand beams and a cross beam, with a kerbed rooflight in the middle. End ports run it across an annex.

@3dassets384 tris
Sorting hall floor tile, 4 m (Parcel Depot and Sorting Hall)

Sorting hall floor tile, 4 m (Parcel Depot and Sorting Hall)

Power floated concrete hall floor module 4 m square and 120 mm thick with saw cut joints running both ways, a yellow lane line along one edge and edge ports on all four sides, so a hall floor of any size lays out on one grid.

@3dassets48 tris
Sports Hall Wall Module with Window Strip (Community Sports Hall and Changing Rooms)

Sports Hall Wall Module with Window Strip (Community Sports Hall and Changing Rooms)

A 2 m by 4.6 m painted blockwork sports hall wall module with a glazed high level window strip at 2.5 m, an aluminium cill and a blue dado band along the playing side. Modules butt on the 2 m module, so a hall wall of any length is a run of them.

@3dassets904 tris
Sports Hall Roof Truss Bay (Community Sports Hall and Changing Rooms)

Sports Hall Roof Truss Bay (Community Sports Hall and Changing Rooms)

One bay of a sports hall roof: an 8.4 m tubular lattice truss spanning the hall, four purlins carrying the next bay and two suspended light bars under the bottom chord. Bays repeat along the hall on the 2 m module.

@3dassets1.3k tris
Village Hall Wall Module (Village Hall and Community Events)

Village Hall Wall Module (Village Hall and Community Events)

A 2 m by 3.2 m village hall wall module: cream painted plaster over a stained dado rail, a white skirting and a high window with a glazing bar and a moulded cill at 2 m. Modules butt on the 2 m module, so a hall wall of any length is a run of them.

@3dassets824 tris
Hall roof cladding bay, 6 m (Machine Shop and Factory Hall)

Hall roof cladding bay, 6 m (Machine Shop and Factory Hall)

Ribbed roof deck for one 6 m by 6 m bay, ported on all four edges so a roof tiles across the hall in either direction.

@3dassets144 tris · 1 ↓
Vinyl floor slab, 1.2 m (Police Station and Detective Office)

Vinyl floor slab, 1.2 m (Police Station and Detective Office)

A 1.2 m square floor slab 60 mm thick finished in welded sheet vinyl, with seam beads on its right and front edges so tiled slabs never double a seam up.

@3dassets176 tris
Station Floor (Police Station and Detective Office)

Station Floor (Police Station and Detective Office)

A police station floor built from the pack 1.2 m partition modules: a squad room of desks and lockers, the private detective office behind its own door with a roll top desk and a turning ceiling fan, an evidence store, an interview room behind a one way mirror, a barred cell,...

@3dassets71.0k tris