3DAssets.dev

Loading model

About

Shooting board with ramped bed, end stop, side fence and a graphite wear strip; fence genuinely square. Dimensions 0.70 × 0.14 × 0.40 m (X × Y × Z). Metre units, +Y up, +Z front; origin on the ground at the footprint centre unless stated. Original walnut, maple, ivory, graphite and brass palette. Static geometry; no rig, animation, collision or navigation data. Static staged equipment only; no heat, vacuum or adhesive simulation, craft recipes or certification.

Use with an AI agent

Copy this prompt into your AI chat, then describe what you want to build with the asset.

Use the “Veneer Shooting Board (Marquetry and Veneer Inlay Workshop)” asset in my project.

Model: https://cdn.3dassets.dev/assets/39094/v1/model.glb
Asset page: https://3dassets.dev/assets/marquetry-and-veneer-inlay-workshop-veneer-shooting-bo-c586554e
Description: Shooting board with ramped bed, end stop, side fence and a graphite wear strip; fence genuinely square.

- Dimensions (X × Y × Z): 0.7 × 0.14 × 0.4 metres
- Triangles: 1.5k
- Animations: none
- Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/)
- Loading: Three.js GLTFLoader; no additional decoders required.

Also available as JSON, Markdown, or via the MCP server.

Import manually

Choose your framework, then copy the code into your project to load the asset.

import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'

const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/39094/v1/model.glb', (gltf) => {
  scene.add(gltf.scene)
})

Common questions

How do I use this model with my AI development tools?
Press "Copy for AI agent" above and paste the prompt into Claude Code, Cursor, Codex, GitHub Copilot, ChatGPT or any other coding assistant. The prompt carries the direct CDN URL, the real-world size, the licence and the loading notes, so the assistant can fetch the model and place it in your project without you writing the loader yourself. For a permanent connection, add the 3DAssets.dev MCP server to your tool with one command (for Claude Code: claude mcp add --transport http 3dassets https://3dassets.dev/mcp) and the assistant can then search the whole catalogue, fetch files and read the usage snippets on its own.

MCP server setupGuide for AI agents

How do I get started?
Three ways, from quickest to most automatic. Download the .glb with the button and drop it into your engine's asset folder, where it imports like any glTF file. Or skip the download: copy the three.js, React Three Fiber or model-viewer snippet under "Import manually", which loads the model straight from the CDN. Or connect your AI agent to the MCP server and ask for it by name, and it will find, fetch and place the model for you.

MCP server setupAPI reference

Which game engines and tools can I use this model with?
Anything that reads glTF, which today means all of the major ones: three.js and React Three Fiber on the web, Godot 4, Unity, Unreal Engine 5, Blender and the model-viewer web component. The model is a self-contained binary glTF (.glb) with textures embedded, so there is one file to import and no plugin, converter or decoder to install first.
How do I import this model into Unity, Godot, Unreal or Blender?
Unity: install the glTFast package (com.unity.cloud.gltfast) from the Package Manager, drop the .glb into Assets and drag the prefab in, or load it at runtime from the CDN URL. Godot 4: copy the file into the project folder and the editor imports it as a scene you can instantiate. Unreal Engine 5: File > Import with the built-in glTF importer, which converts the axes for you. Blender: File > Import > glTF 2.0. Units are metres with +Y up in the file, and every importer above handles the conversion to its own axes automatically.
Can I use this model in a commercial game, and do I need to credit anyone?
Yes to commercial use and no to credit. Every model on 3DAssets.dev is released under CC0 1.0 Universal, which places it in the public domain: use it in a paid game, an app, a film or a client project, modify it, redistribute it, and put nothing in the credits. A link back is welcome but it is entirely your choice.

CC0 licence text

Can I load it from the CDN instead of downloading it?
Yes. The .glb file has a permanent URL on cdn.3dassets.dev that is CORS-enabled and never changes content, so you can pass it straight to GLTFLoader, glTFast or model-viewer in production and cache it as hard as you like. Downloading is only needed for engines that import from disk.
Do I need Draco, Meshopt or KTX2 to load it?
No. The geometry is quantized with KHR_mesh_quantization and the textures are re-encoded to WebP, both of which three.js, Godot, Unity and Blender read natively, so a plain GLTFLoader is enough. There is nothing extra to configure and no decoder to ship with your bundle.

Veneer Shooting Board (Marquetry and Veneer Inlay Workshop)

Shooting board with ramped bed, end stop, side fence and a graphite wear strip; fence genuinely square.

Download asset · 28.3 KB

More in Props & Furniture

Stocked Surfboard Rack (Beach Surf and Paddle Kit)

Stocked Surfboard Rack (Beach Surf and Paddle Kit)

The freestanding surfboard rack stocked for hire: shortboard, fish, soft top learner and longboard standing tail down in the four slots.

@3dassets16.8k tris · 191 ↓
Dune Grass Tuft (Beach Surf and Paddle Kit)

Dune Grass Tuft (Beach Surf and Paddle Kit)

Marram dune grass tuft: 26 tapered curling blades and four seed heads rising from a low sand mound.

@3dassets1.4k tris · 180 ↓
Swim Zone Buoy Orange (Beach Surf and Paddle Kit)

Swim Zone Buoy Orange (Beach Surf and Paddle Kit)

Sun yellow variant of the swim zone marker buoy with a coral cross topmark.

@3dassets1.4k tris · 174 ↓
Beach Umbrella (Beach Surf and Paddle Kit)

Beach Umbrella (Beach Surf and Paddle Kit)

2.4 m beach umbrella: sand anchor with base plate, steel lower pole with tilt collar and knob, timber upper pole, runner and stretchers, eight steel ribs under alternating coral and foam panels with a scalloped valance, vent cap and finial.

@3dassets2.1k tris · 169 ↓
Dune Fence Run (Beach Surf and Paddle Kit)

Dune Fence Run (Beach Surf and Paddle Kit)

2.6 m dune wind fence: three round timber posts, twin twisted wire lines at three heights and weathered grey slats set at slightly uneven heights.

@3dassets2.2k tris · 164 ↓
Driftwood Log (Beach Surf and Paddle Kit)

Driftwood Log (Beach Surf and Paddle Kit)

2.8 m weathered driftwood log: twisted tapering trunk, two branch stubs, a splayed root end and one sawn end showing the grain.

@3dassets600 tris · 157 ↓
Folding Beach Chair (Beach Surf and Paddle Kit)

Folding Beach Chair (Beach Surf and Paddle Kit)

Low folding beach chair: steel tube frame with feet, timber armrests and a striped coral and foam sling seat that sags into the back.

@3dassets1.2k tris · 156 ↓
Warning Flag Pole (Beach Surf and Paddle Kit)

Warning Flag Pole (Beach Surf and Paddle Kit)

3.1 m warning flag pole: the patrol pole with a solid coral no swimming flag and coral finial.

@3dassets742 tris · 153 ↓
Full size open net soccer goal (Football Soccer Stadium and Club Grounds)

Full size open net soccer goal (Football Soccer Stadium and Club Grounds)

Goal with 7.32 m clear width, 2.44 m clear height, 2 m deep open cord net and tubular frame.

@3dassets2.1k tris · 150 ↓
Surf Wax Kit (Beach Surf and Paddle Kit)

Surf Wax Kit (Beach Surf and Paddle Kit)

Surf wax kit lying on the sand: sun yellow wax puck in a paper wrapper, a coral base coat bar and a toothed teal wax comb.

@3dassets1.5k tris · 148 ↓
Lifeguard Megaphone (Beach Surf and Paddle Kit)

Lifeguard Megaphone (Beach Surf and Paddle Kit)

Handheld lifeguard megaphone resting on its grip: coral flared bell with grille, battery housing, pistol grip and trigger, siren switch and carry strap.

@3dassets956 tris · 144 ↓
T shirt on a hanger (Clothing Rail and Wardrobe)

T shirt on a hanger (Clothing Rail and Wardrobe)

A terracotta t shirt hanging on a slim velvet hanger: a shaped shell with shoulders, a slight body taper, short sleeves with turned cuffs and a ribbed crew neck, in the settled shape a jersey tee takes on a rail.

@3dassets1.0k tris · 120 ↓

Similar assets

Safety Pad Strip (Trampoline Park and Soft Play)

Safety Pad Strip (Trampoline Park and Soft Play)

A 2 m safety pad strip 300 mm wide: an amber bolster on two steel legs and a spine rail, topped with a grey grip strip at exactly bed pad height, so a court of beds is separated and walked between. Ported to a bed on both long sides and to another strip at both ends.

@3dassets396 tris · 31 ↓
Bed End Stop (Sawmill and Timber Yard)

Bed End Stop (Sawmill and Timber Yard)

Terminal bed crossbar with two raised rail bump stops and resilient contact pads.

@3dassets1.5k tris · 25 ↓
Profiling Care Bed with Side Rails (Care Home and Day Room)Animated

Profiling Care Bed with Side Rails (Care Home and Day Room)

A 920 mm profiling care bed on four braked castors: an oak head and foot board, a cream platform at 560 mm with a crowned mattress, a pillow, a folded throw and folding side rails up on both sides.

@3dassets3.8k tris · 36 ↓
Menu board with blank strips (Retro Diner and Roadside Motel)

Menu board with blank strips (Retro Diner and Roadside Motel)

The board over the pass: a dark 1.8 m panel with chrome rails top and bottom and ten blank changeable strips in two columns, standing proud of the board. Nothing is lettered, so a project can put its own menu on the strips.

@3dassets156 tris · 34 ↓
Veneer Edge Jointing Fence (Marquetry and Veneer Inlay Workshop)

Veneer Edge Jointing Fence (Marquetry and Veneer Inlay Workshop)

Long jointing fence with three clamp dogs, screws and handles; holds edges for jointing.

@3dassets2.2k tris · 22 ↓
Station platform end ramp module (Steam Era Railway and Rolling Stock)

Station platform end ramp module (Steam Era Railway and Rolling Stock)

The platform module with a sloping end ramp closing the +Z end of a platform run.

@3dassets364 tris · 40 ↓
Rack end panel with sign board (Hardware Store and DIY Warehouse)

Rack end panel with sign board (Hardware Store and DIY Warehouse)

A 1.1 m by 2.4 m rack end cladding panel on a light frame with a blank 0.9 m sign board above it, closing the end of a racking run to the shopfloor.

@3dassets496 tris · 36 ↓
Strip Cutting Gauge (Marquetry and Veneer Inlay Workshop)

Strip Cutting Gauge (Marquetry and Veneer Inlay Workshop)

Strip gauge with rule bar, sliding stop, brass pin and graphite graduations.

@3dassets2.4k tris · 19 ↓
Crossbanding Strip Packet (Marquetry and Veneer Inlay Workshop)

Crossbanding Strip Packet (Marquetry and Veneer Inlay Workshop)

Packet of eight alternating crossbanding strips stacked on a keeper board; strips touch throughout.

@3dassets2.7k tris · 19 ↓
Piste End Ramp (Fencing Club and Tournament Piste)

Piste End Ramp (Fencing Club and Tournament Piste)

Shallow ten-step bevel approximation linking the 25 mm piste deck to the hall floor.

@3dassets3.0k tris · 15 ↓
Raised Boarding Kerb Section (Bus Station and City Transit)

Raised Boarding Kerb Section (Bus Station and City Transit)

A 4 m kerb section at the raised 160 mm boarding height a low floor bus docks against, with a charcoal nosing on the road face and a yellow tactile strip along the pavement side. Sections butt end to end.

@3dassets36 tris · 30 ↓
Raised Bed, Planted (Allotments and Community Garden)

Raised Bed, Planted (Allotments and Community Garden)

A 2.4 x 1.2 m timber raised bed 34 cm high on four corner posts, filled with soil and planted with three rows of leaf crops. Run ports on both ends, so beds lay end to end down a plot.

@3dassets360 tris · 35 ↓