3D Assets
@3dassets
Counter height bar stool (Cafe, Bakery and Coffee Bar)
A counter height bar stool with a back: a splayed tube frame with two foot rings, a piped seat pad on a chamfered timber pan, and a welted back pad on bent uprights.
Lounge armchair in rust (Cafe, Bakery and Coffee Bar)
The lounge armchair in the rust upholstery colourway: identical geometry with the upholstery and welt materials swapped.
Banquette corner (Cafe, Bakery and Coffee Bar)
A 700 mm banquette corner that turns a run through 90 degrees: a square base with a piped seat pad and two welted back faces meeting at the corner post under mitred capping rails.
Banquette run 1400 (Cafe, Bakery and Coffee Bar)
A 1.4 m banquette run: a timber base with a kick recess, a piped and crowned seat pad, two welted upright back pads with fluted seams and a shaped capping rail.
Lounge armchair (Cafe, Bakery and Coffee Bar)
A 0.72 m upholstered lounge armchair: a chamfered plinth on turned feet, a crowned body shell, a piped seat cushion, a welted back pad and rolled arm cushions with welt seams.
Metal stacking cafe chair (Cafe, Bakery and Coffee Bar)
A stacking metal cafe chair: a bent tube frame with cross rails, a pressed seat pan with a real slotted grille, and three curved back slats.
Bentwood cafe chair (Cafe, Bakery and Coffee Bar)
A bentwood cafe chair: four splayed turned legs with a ring stretcher, a lathed dished round seat with a rolled edge, and a steam bent hoop back with an inner loop.
Banquette run 1400 in tan (Cafe, Bakery and Coffee Bar)
The 1.4 m banquette run in the tan upholstery colourway: identical geometry with the upholstery and welt materials swapped.
Dough scraper set (Cafe, Bakery and Coffee Bar)
A bakery scraper set on a timber board: a steel bench scraper with a moulded grip, a curved plastic bowl scraper and a lame with a turned handle and a blade.
Communal table 2.4 m (Cafe, Bakery and Coffee Bar)
A 2.4 m communal table: five thick timber planks with square edges and steel end straps, carried on two trestle frames with a centre stretcher.
Four person cafe table (Cafe, Bakery and Coffee Bar)
An 0.8 m square four person cafe table: a bullnosed timber top on an apron frame with four tapered turned legs.
Two person cafe table (Cafe, Bakery and Coffee Bar)
A 0.6 m round two person cafe table at 750 mm: a dished timber top with a brass edge band on a turned column and a splayed cast foot with a spider plate.
Baker peel set on rack (Cafe, Bakery and Coffee Bar)
A wall rack of three baker peels: one rectangular blade and two round blades on turned timber shafts with rolled grips, leaning in a timber cradle.
Ingredient bin set (Cafe, Bakery and Coffee Bar)
A set of three castored ingredient bins at graded heights: chamfered bodies with sloped lids, tubular grab rails and scoop clips on the front.
Bread slicer (Cafe, Bakery and Coffee Bar)
A bread slicer: a stainless chassis on bullet feet carrying a painted hood over a band blade bank of nine blades, a loaf carriage tray, a bagging chute and a two key pad.
Bakery prep sink (Cafe, Bakery and Coffee Bar)
A 1.3 m bakery prep sink: two deep pressed bowls with rolled rims and strainer wastes in a stainless top on a tubular leg frame, with a ribbed drainer, a rear upstand and a swan neck mixer with lever handles.
Scale bench (Cafe, Bakery and Coffee Bar)
A 1.2 m scale bench: a stainless bench on a tubular leg frame with an undershelf, carrying a platform scale with a column mounted readout and a bench scale with a round pan and a tilted display.
Cooling rack trolley (Cafe, Bakery and Coffee Bar)
A 1.7 m cooling rack trolley on braked castors: six wire decks of longitudinal and cross rods in rolled frames, between four chamfered posts, with a tubular push handle.
Banneton proving rack (Cafe, Bakery and Coffee Bar)
A 1.6 m timber banneton rack: four shelves between corner posts carrying twelve woven proving baskets built from staves and weavers.
Mobile dough trough (Cafe, Bakery and Coffee Bar)
A 0.9 m mobile dough trough on braked castors: a deep pressed trough with rolled rims and radiused corners on a stainless underframe, with a half lid leaf and a tubular grab rail.
Dough divider (Cafe, Bakery and Coffee Bar)
A dough divider on castors: a chamfered body with a recessed pressing chamber holding a cross grid of knife blades, a hinged lever arm with a pressing plate and a turned grip bar.
Sheet pan rack (Cafe, Bakery and Coffee Bar)
A 1.75 m sheet pan rack on braked castors: nine pairs of angled tray runners between chamfered posts, loaded with five pressed baking trays.
Cargo Extraction Pad (Extraction Routes and Objectives)
Cargo Extraction Pad assembled from canonical models in this pack. Demonstration layout only; systems are not simulated.
Flour bin bench (Cafe, Bakery and Coffee Bar)
A 1.5 m flour bin bench: a stainless bench with a rear upstand and an undershelf over three raked tilt-out flour bins, each with a tubular grab rail and a lid lip.