3D Assets
@3dassets
Welding bay and stores corner (Machine Shop and Factory Hall)
The corner of the same hall given over to welding and stores: two walled bays with a roller shutter and high windows, columns, trusses, a decked roof and a glazed ridge, and a crane runway along the wall. The welding bay has its table with clamps, two screens, the MIG cart...
Lockout and isolation board (Machine Shop and Factory Hall)
Free standing charcoal board 1.2 m wide carrying red padlocks, yellow tags and a cream procedure sheet, for isolating a machine before work.
High bay light fitting (Machine Shop and Factory Hall)
Industrial high bay pendant: a cast aluminium reflector with a cream diffuser on a 0.85 m drop rod and a hanging hook. The origin is under the lamp, so place it at the fitting's height.
First aid station cabinet (Machine Shop and Factory Hall)
Cream first aid cabinet with a red cross panel on a charcoal post and base, standing 1.5 m tall beside a machine row.
Fire extinguisher on a bracket (Machine Shop and Factory Hall)
Nine litre red extinguisher standing on the floor against a charcoal wall bracket with a cream identification sign above it.
Yellow safety bollard (Machine Shop and Factory Hall)
Floor bolted machine guard bollard 0.9 m tall in safety yellow with charcoal impact bands and a bolted base plate.
AnimatedFloor standing workshop fan (Machine Shop and Factory Hall)
Pedestal fan 1.4 m tall with a charcoal cage guard, a cast motor body and four blades that spin, for moving air over a welding bay or a machine.
Set of machined parts (Machine Shop and Factory Hall)
Three finished parts on a timber board: a turned stepped shaft, a milled block with a pocket and a bolt flange, for dressing a bench, a plate or a pallet.
Micrometer on a bench stand (Machine Shop and Factory Hall)
Bench micrometer stand: a cast base with a charcoal clamp holding a bright 25 mm micrometer, standing 0.3 m tall on an inspection bench.
Steel chip tray (Machine Shop and Factory Hall)
Shallow pressed steel tray 0.8 m by 0.5 m with folded sides and a load of swarf, sliding under a machine to catch chips.
Vernier caliper on a bench block (Machine Shop and Factory Hall)
Bright 300 mm vernier caliper lying on a charcoal bench block with a cream measuring card, for dressing an inspection bench or a surface plate.
Pile of steel swarf (Machine Shop and Factory Hall)
Loose heap of bright steel turnings about 0.9 m across and 0.3 m high, for dressing the floor beside a lathe or under a chip conveyor.
Coolant mixing tank with pump (Machine Shop and Factory Hall)
Wheeled coolant tank in blue with a charcoal pump head, a delivery hose coiled on the body and a sight strip, for topping up the machines.
Cast iron surface plate on a stand (Machine Shop and Factory Hall)
Inspection surface plate 0.9 m by 0.6 m on a charcoal stand with levelling feet, its ground face bright and a turned shaft resting on it ready for measuring.
Free standing safety sign post (Machine Shop and Factory Hall)
Yellow sign post 1.8 m tall on a weighted base carrying two blank warning plates, for marking a machine, a walkway or a spill.
Steel stillage cage (Machine Shop and Factory Hall)
Stackable mesh stillage 1.2 m by 0.8 m holding castings, with blue corner posts, a charcoal base and a half drop front.
Empty timber pallet (Machine Shop and Factory Hall)
Standard 1.2 m by 1.0 m timber pallet with three bearers and five deck boards, for stacking, loading or leaning against the racking.
Open scrap skip (Machine Shop and Factory Hall)
Two and a half metre open steel skip with sloped ends, lifting lugs and a load of offcuts and swarf, for the metal that leaves the shop.
AnimatedSwarf bin on wheels (Machine Shop and Factory Hall)
Charcoal two wheeled bin 0.72 m wide filled with steel turnings, its lid hinged along the back edge and a yellow swarf notice on the front.
Oil drum on a tipping stand with a tap (Machine Shop and Factory Hall)
Two hundred litre blue drum lying in a charcoal cradle stand with a brass coloured tap and a drip tray beneath, for cutting oil at the machines.
Two shelf workshop trolley (Machine Shop and Factory Hall)
Wheeled steel trolley 0.9 m long with two charcoal shelves, a push handle and four castors, carrying a tray of finished parts.
AnimatedCounterbalance forklift truck (Machine Shop and Factory Hall)
Three tonne counterbalance forklift in safety yellow: a charcoal counterweight, an overhead guard, a seat and steering wheel, a two stage mast, and forks that lift while the wheels roll.
Hand pallet truck (Machine Shop and Factory Hall)
Manual pallet truck with charcoal forks 1.15 m long, load rollers at the tips, a pump body and a steel tiller with a red release lever.
Parts bin shelving with plastic bins (Machine Shop and Factory Hall)
Blue shelving 1.2 m wide and 1.9 m tall carrying four rows of open fronted cream and blue picking bins, with a written card on the end frame.