3D Assets
@3dassets
Stylized Pine Tree Windswept (Stylized Trees and Rocks Kit)
Windswept stylized pine leaning hard with its layered crown swept to one side for coasts, ridges and passes.
Stylized Oak Tree Mature (Stylized Trees and Rocks Kit)
Mature stylized oak with a thick flared bole, three spreading limbs and a broad seven lobe crown.
Stylized Ancient Oak Tree (Stylized Trees and Rocks Kit)
Ancient stylized oak with a massive buttressed bole, heavy limbs, a wide nine lobe crown and moss tucked into the forks.
Stylized Pine Tree Wide (Stylized Trees and Rocks Kit)
Broad stylized pine with a sturdy trunk and three wide layered needle shelves forming a classic spreading crown.
Stylized Pine Tree Sapling (Stylized Trees and Rocks Kit)
Small stylized pine sapling with a short stem and two rounded needle tiers for fresh planting and undergrowth.
Stylized Pine Tree Tall (Stylized Trees and Rocks Kit)
Tall narrow stylized pine with a straight bole and four stacked needle cones for windbreaks and background stands.
Bonded Yard and Open Stillhouse (Distillery and Bonded Warehouse)
A 44 x 36 m working bonded site, built open topped so every interior can be walked and photographed. The stillhouse stands west: four copper pot stills in a row with their lyne arms over a worm tub and a shell and tube condenser, the spirit safe and the two receivers in front...
Visitor Tasting Counter (Distillery and Bonded Warehouse)
Visitor tasting counter 2.8 x 1.1 m and 1.8 m to the back shelf: a cask staved oak front with iron bands, a plank top, six nosing glasses on a tray, a water jug, two unlabelled bottles and seven more glasses upended on the shelf behind. Nothing carries a label.
AnimatedDelivery Lorry, Flatbed (Distillery and Bonded Warehouse)
Flatbed delivery lorry 7.2 m long and 2.9 m tall on six wheels that roll: a boxy cab with a barred grille, glazing and mirrors, a plank bed with dropsides and a headboard, a fuel tank and steps. Every panel, door and side is blank, with no name, livery or number.
Yard Grit Module (Distillery and Bonded Warehouse)
Four metre yard tile 0.16 m thick: a rolled grit surface with two wheel ruts across it and loose stones scattered over it. Tiles edge to edge on the same grid as the warehouse floor slab, so a whole site lays with no gaps.
Warehouse Floor Slab (Distillery and Bonded Warehouse)
Four metre floor tile 0.14 m thick: a concrete bed with sixteen laid stone flags on it and open joints between them. Tiles edge to edge on a four metre grid with the yard module, so a warehouse or stillhouse floor has no seams.
Pagoda Roof Kiln Vent (Distillery and Bonded Warehouse)
Pagoda kiln vent 3.6 m square at the eaves and 3.8 m tall: a slated tapering roof in two stages with a louvred lantern of four faces between them, boarded eaves on all four sides and a plain iron finial. Stands over a kiln, on a wall head or astride a roof ridge.
Slate Roof Section (Distillery and Bonded Warehouse)
Four metre pitched slate roof run spanning 5.2 m and rising 1.5 m to the ridge: a slated gable body with seven laid courses on each slope, timber eaves boards, gutters, rafter feet and a ridge course over the joint. Sits on two wall heads and lays end to end with the next run.
Stillhouse Window Bay (Distillery and Bonded Warehouse)
Four metre wall bay with a 2.6 x 3.0 m industrial window: a dressed sill and lintel, an iron frame of twenty lights with glazing bars, and rubble facing above and below. Lets the stillhouse be seen into, and lays end to end with the plain wall bay.
AnimatedWarehouse Door Pair (Distillery and Bonded Warehouse)
Four metre warehouse doorway with a 2.6 m opening under a 3.4 m lintel: dressed jambs, a threshold and two boarded and strapped leaves, painted, that swing out on their outer stiles. Sits in a wall run and carries a wall port at either end.
Corner Pillar (Distillery and Bonded Warehouse)
Dressed stone corner pillar 0.6 m square and 4.8 m tall with a capping stone: quoined courses on all four faces and a wall port on each side, so it turns a corner, ends a run or joins two runs in line.
Wall Section (Distillery and Bonded Warehouse)
Plain four metre rubble wall bay 4.6 m to the head and 0.4 m thick, faced on both sides, with a plinth course, a string course at 2.3 m and a capping course. The base module of the stillhouse and the warehouse, laid end to end between corner pillars.
Bonded Warehouse Wall Run (Distillery and Bonded Warehouse)
Four metre rubble wall bay 4.6 m to the head and 0.4 m thick, faced both sides: a battered plinth course, a capping course, a louvred ventilation grille in a dressed surround and two barred slit vents low down. Lays end to end and meets a corner pillar at either end.
Pallet of Casks (Distillery and Bonded Warehouse)
Four barrels stood on end on a 1.5 x 1.2 m timber pallet and strapped in two bands, 1.05 m tall overall. Every head is blank. Ready for a lorry bed, a loading bay or a corner of a filling store.
AnimatedCharring Drum (Distillery and Bonded Warehouse)
Charring drum 2.2 m between frames and 1.7 m tall: a perforated iron drum 1.5 m long turning on a shaft over a hearth pan and fire bars, in a braced frame with a crank handle at one end. The fire is not modelled; the drum turns on its axis.
Hoop Stack (Distillery and Bonded Warehouse)
Stack of iron cask hoops on a timber pallet, 1.5 x 0.9 m and 0.65 m tall: seven wide chime hoops in one pile, six smaller ones in another and three more leaning against them. Cooperage stock; the hoops are one static body each.
Stave Bundle (Distillery and Bonded Warehouse)
Bundle of sawn oak staves 0.75 m across and 1.5 m tall, stood on end and tied with two iron hoops, with five more staves laid flat beside it. Raw cooperage stock for a yard, a stave store or a cooperage floor.
Cooperage Anvil and Croze (Distillery and Bonded Warehouse)
Cooper’s working set on a 1.3 x 0.9 m footprint: a hooped oak block carrying a stake anvil with its horn, a croze with its fence and cutter laid on a low bench beside it, and a hand adze leaning against the block. Static tools; nothing here moves.
AnimatedStencil Bench (Distillery and Bonded Warehouse)
Stencil bench 1.6 x 0.75 m and 0.88 m to the top: an oak bench with a back board, four blank stencil plates hung on it, a stack of blanks and an ink tray on the top, two brushes and a drawer of spare plates below. Every plate is cut with nothing at all.