
Walkable demo
Fast food restaurant
Step into an 18 by 12 metre fast food restaurant built from the Fast Food Counter and Drive-Thru pack: a front counter with tills and menu board, the kitchen line behind it, self-serve drinks, booths, swing-seat tables and order kiosks.
About
One restaurant floor from 24 of the pack's 128 models, in the room preset with daylight and lamps under a 3.4 m ceiling.
You start by the bar-height counter and its high stools, looking across the dining room: three fixed booths along the front wall, two pedestal tables with moulded stools and three fixed tables with swing seats. Queue rails lead to the front counter with its two till positions, the flap module and the triple overhead menu board. Behind the pass-through shelf is the kitchen line: assembly table, clamshell grill, flat-top griddle, twin-basket fryer, fry dump station and the holding cabinet under the extraction canopy. The drinks tower, condiment island and tray return rack line the east wall, and two self-order kiosks stand by the west.
This pack ships animation clips: the tills, the counter flap, the grill, the fryer, the holding cabinet and the swing seats play as you come within three metres and rewind when you leave. The drive-thru lane in the pack is an outdoor scene and is not placed here.
Every piece here is a published model from the pack, placed by hand. Walk with the keys or touch, and approach a piece to see it move if it has animation. Colliders, navigation and gameplay are yours to add.
Points of interest
The counter
An end cap, 600 mm modules, two till positions and the flap module make the front counter, with the triple menu board above. The tills and the flap have clips.
Front counter till position (Fast Food Counter and Drive-Thru)Kitchen line
Behind the pass-through shelf: the assembly table, clamshell grill, flat-top griddle, twin-basket fryer with dump station and the holding cabinet under the extraction canopy. The grill, fryer and cabinet have clips.
Clamshell grill (Fast Food Counter and Drive-Thru)Drinks
The eight-valve self-serve drinks tower, the condiment island and the tray return rack along the east wall.
Self-serve drinks tower, 8 valve (Fast Food Counter and Drive-Thru)Swing-seat tables
Three fixed tables with four swing seats each; the seats swing out as you approach.
Fixed table with four swing seats (Fast Food Counter and Drive-Thru)Booths
Three four-seat fixed booths along the front wall and two pedestal tables with moulded stools.
Fixed booth, 4 seat (Fast Food Counter and Drive-Thru)Kiosks
Two floor-standing self-order kiosks by the west wall, and queue rail modules in front of the counter.
Self-order kiosk, floor standing (Fast Food Counter and Drive-Thru)
Use with an AI agent
Copy this prompt into your AI chat to rebuild the layout, then describe what to change.
Rebuild the "Fast food restaurant" demo scene from the Fast Food Counter and Drive-Thru pack in my project. Layout (JSON, every placement with its CDN URL): https://3dassets.dev/api/v1/demos/fast-food-and-drive-thru Pack manifest: https://3dassets.dev/api/v1/packs/fast-food-and-drive-thru Demo page: https://3dassets.dev/demos/fast-food-and-drive-thru - 40 placements of 24 models; units are metres, +Y up, rotation is yaw in degrees about +Y - Spawn at (5.5, 0, 5.2) facing 200 degrees; eye height 1.6 m - Licence: CC0 1.0 Universal (no attribution required) - Loading: three.js GLTFLoader, one load per distinct model, cloned per placement; no decoders required
Also available as JSON or Markdown, and via the MCP server.
Common questions
How do I use Fast food restaurant with my AI development tools?
How do I get started?
Which game engines and tools can I use Fast food restaurant with?
How do I import this scene into Unity, Godot, Unreal or Blender?
Can I use Fast food restaurant in a commercial game, and do I need to credit anyone?
Can I load it from the CDN instead of downloading it?
Is the demo itself a file I can download?
Can I change the scene, or add gameplay to it?
Models in this demo
Front counter end cap (Fast Food Counter and Drive-Thru)
A 300 mm counter end cap that closes a run with a wrapped return panel and a stainless top that overhangs the exposed end.
Front counter module 600 (Fast Food Counter and Drive-Thru)
A 600 mm front counter module on the 900 mm counter grid: laminate customer fascia with an accent reveal, recessed kick, stainless bullnose top with a rear upstand, crew-side wire shelf and a bag rail on the top.
Front counter till position (Fast Food Counter and Drive-Thru)
A 600 mm counter module fitted out as a till position: tilted point-of-sale screen on a stub column, card reader on a gooseneck, receipt printer and a cash drawer under the worktop.
Front counter flap module (Fast Food Counter and Drive-Thru)
A 600 mm counter module with a lift-up worktop flap and a half-height swing gate below it, so crew can cross the counter line.
Overhead menu board, triple (Fast Food Counter and Drive-Thru)
A triple overhead digital menu board: three blank landscape panels in a shared chamfered housing, hung on two drop rods from a ceiling plate.
Queue rail module (Fast Food Counter and Drive-Thru)
A 1.2 m fixed queue rail bay with a top rail, a mid rail and a single post at the left end so a run of bays never doubles its posts.
Self-order kiosk, floor standing (Fast Food Counter and Drive-Thru)
A floor standing self-order kiosk: chamfered pedestal body on a cast base, recessed tilted touchscreen, card reader pod, receipt slot, blank header panel and a rear vent.
Pass-through heated shelf (Fast Food Counter and Drive-Thru)
A 1.2 m pass shelf between kitchen and counter: a heated landing tray on the crew side, an overhead two-lamp gantry and a glazed pass shield on the customer side.
Assembly table with hot rail (Fast Food Counter and Drive-Thru)
A 1.6 m assembly table: four pan wells, a clear wrapping area, an overhead heated rail on posts with three lamps and a ticket clip strip.
Clamshell grill (Fast Food Counter and Drive-Thru)
A two-platen clamshell grill on tubular legs: lower cooking plate with a grease trough, hinged upper platen on counterweight arms, front grease drawer and a recessed control panel.
Flat top griddle (Fast Food Counter and Drive-Thru)
A 1.1 m flat top griddle on legs with an undershelf, splash guards on three sides, a front grease chute and a removable catch cup under it.
Twin basket fryer with filtration (Fast Food Counter and Drive-Thru)
A twin vat fryer with cold zones, two mesh baskets hung on the rear rack, a pull-out filtration drawer in the base and a digital control head.
Fry dump station (Fast Food Counter and Drive-Thru)
A heated fry dump station: a raked landing pan on a stainless bench, a scoop rail, a seasoning shaker holder and an overhead two-lamp gantry.
Universal holding cabinet (Fast Food Counter and Drive-Thru)
A universal holding cabinet on tubular legs: six pairs of tray runners, three loaded trays, a glazed hinged door and a digital control panel above it.
Kitchen line extraction canopy (Fast Food Counter and Drive-Thru)
A 2 m island extraction canopy with a chamfered lip, four raked grease filters, a grease gutter along the front and a plenum with a square duct spigot.
Self-serve drinks tower, 8 valve (Fast Food Counter and Drive-Thru)
An eight valve self-serve drinks tower: dispensing heads over a perforated drip trough, cup levers, a splash panel and a blank header above the valves.
Condiment island (Fast Food Counter and Drive-Thru)
A 950 mm freestanding condiment island: two lever sauce pumps over a perforated drip trough, a three bay napkin dispenser block and a crew-side wire shelf.
Tray return rack (Fast Food Counter and Drive-Thru)
A mobile tray return rack on castors with seven pairs of raked runners, a wire base shelf and a blank sign panel at the head.
Fixed booth, 4 seat (Fast Food Counter and Drive-Thru)
The fixed booth at the 1.44 m four seat length, with wider benches, backs and table on the same construction.
Fixed table with four swing seats (Fast Food Counter and Drive-Thru)
A fixed dining unit: a 920 mm laminate top on a heavy pedestal, with four moulded swing seats on tubular arms that each pivot about the column.
Pedestal table, 2 seat (Fast Food Counter and Drive-Thru)
A 620 mm square two seat pedestal table: a chamfered cast base, a tapered column, a spider plate and a postformed laminate top with an accent inlay.
Moulded stool (Fast Food Counter and Drive-Thru)
A dining height moulded stool: a dished shell seat with a rolled edge and a raked back lip, on a tapered column and a chamfered cast base.
Bar height counter with foot rails (Fast Food Counter and Drive-Thru)
A 1.6 m double-sided bar height counter at 1.05 m: laminate panelling on both faces, an accent reveal, a postformed top and a foot rail on stand-off brackets each side.
High stool with back (Fast Food Counter and Drive-Thru)
A bar height stool: a piped cushion seat and a moulded back lip on a tapered column, with a ring foot rest on four spokes and a chamfered cast base.