Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,345 free GLB models
AnimatedBall Return Unit (Bowling Alley and Pool Hall)
The ball return console that stands between two lanes: a tapered frame body with glowing side bands, the chrome return rails and two balls waiting on the ramp, and a hood over the ball lift that opens on its back edge for a jam.
AnimatedPinsetter Machine Housing (Bowling Alley and Pool Hall)
The pinsetter that stands behind a pin deck on the lane pitch: a welded frame with side sheets, the accent masking panel a bowler sees above the pins, the distributor drum and chutes inside, and a control box. The cowl over the machine deck lifts on its back edge.
Bowling Pin (Bowling Alley and Pool Hall)
A single ten pin on the real profile: 381 mm tall, 121 mm across the belly, in coated white with the two red neck stripes and the dark base ring that keep it readable against a pale floor.
Guitar Wall Hanger (Music Recording Studio and Instruments)
A timber backed guitar wall hanger: a screwed plate with a steel stem and two sleeved yoke arms 140 mm apart, which is the cradle a guitar neck hangs in. The plate sits flat against the wall.
Studio Wall Clock (Music Recording Studio and Instruments)
A 260 mm studio wall clock: a matt black case with a cream dial, twelve markers, hour and minute hands and a red sweep hand. The back of the case sits at z=0 so it hangs flat on a wall.
Coffee Mug (Music Recording Studio and Instruments)
A 350 ml stoneware mug 100 mm tall with a banded glaze, a loop handle and coffee in it, for the console armrest.
Water Bottle (Music Recording Studio and Instruments)
A 750 ml water bottle 280 mm tall with a moulded waist, a printed band and a screw cap, for the corner of a desk or the top of an amp.
Studio Rug (Music Recording Studio and Instruments)
A 2.6 by 1.9 m patterned rug in teal, red and amber with a fringed edge, 10 mm thick. A kit is set up on one because it stops the drums walking and takes the ring off the floor.
Drum Throne (Music Recording Studio and Instruments)
The same stool built as a drum throne: a wider, deeper padded seat at 550 mm on a three leg frame, which is the height and the spread a kit is played from.
Studio Stool (Music Recording Studio and Instruments)
A 660 mm padded studio stool: a round upholstered seat on a four leg steel frame with a foot ring and rubber tips, for a guitarist, an engineer or a spare seat at the desk.
Music Stand (Music Recording Studio and Instruments)
A folding music stand at 1.06 m with a sheet on its desk: a perforated steel desk on a raked hinge, a telescopic column and a rubber footed tripod.
Acoustic Ceiling Cloud (Music Recording Studio and Instruments)
A 1.2 by 0.9 m absorber cloud on four hanging wires: a timber frame wrapped in grey fabric with 550 mm of wire above it and ceiling anchors. The origin is at the bottom of the panel, so placing it at the ceiling height less the drop hangs it correctly.
Patch Bay Panel (Music Recording Studio and Instruments)
A 2U 19 inch patch bay: 48 quarter inch jacks in two rows of 24 with designation strips between them, on a rack panel with mounting ears. It stands on its bottom edge so it can be dropped straight into a rack.
Monitor Controller (Music Recording Studio and Instruments)
A desktop monitor controller, 200 by 170 mm: a weighted wedge with a large volume encoder in a ring, four source and mute buttons and a small meter display.
Headphones on a Wall Hook (Music Recording Studio and Instruments)
A pair of closed back studio headphones hanging on a wall hook: a padded headband, two swivel cups with fabric pads and an alloy yoke, on a screwed wall plate. The plate sits flat against the wall with the hook 75 mm proud of it.
Studio Desk with Screen Pair (Music Recording Studio and Instruments)
A 1.6 m studio desk in dark timber with a steel underframe, a lower shelf and a modesty panel, carrying a pair of 24 inch screens on their feet, a keyboard and a mouse. The screens are turned in toward the engineer.
Mixing Console (Music Recording Studio and Instruments)
A 1.98 m analogue mixing console on timber side cheeks: sixteen channel strips of four knobs, a switch and a 100 mm fader on a raked bay, a master section, a meter bridge with two meter windows, and an armrest along the engineer side. It stands 1.02 m to the top of the bridge.
Studio Monitor on a Stand (Music Recording Studio and Instruments)
A two way nearfield studio monitor on a 940 mm pole stand: a 240 by 370 mm cabinet with a six inch woofer, a waveguide tweeter, a rear facing port tube and a status lamp, tipped back on a cast plate base.
Vocal Microphone with Pop Shield (Music Recording Studio and Instruments)
A vocal microphone at 1.54 m on a straight stand: a large diaphragm capsule in an elastic shockmount, with a 150 mm pop shield on a gooseneck clamped to the column, over a telescopic column and a rubber footed tripod.
Bass Amplifier Stack (Music Recording Studio and Instruments)
A bass rig 1.24 m tall: an eight by ten inch speaker cabinet with a grille cloth, metal corner caps and rubber feet, under a rackmount amplifier head with seven knobs, a meter window and a status lamp.
Boom Stand, Empty (Music Recording Studio and Instruments)
The same counterweighted boom stand with an empty clip, for a source that already has its own microphone or for dressing a corner of the live room.
Microphone on a Boom Stand (Music Recording Studio and Instruments)
A counterweighted boom stand at 1.42 m with a large diaphragm microphone in its clip, angled down over a source 620 mm out from the column. The base is a rubber footed tripod and the column is telescopic.
Guitar Pedal Board (Music Recording Studio and Instruments)
A sloped 620 by 320 mm pedal board carrying five effects pedals in coloured enclosures, each with two knobs, a footswitch and a status lamp, patched together with short jumper leads.
Synth Keyboard on an X Stand (Music Recording Studio and Instruments)
A 61 note synthesiser on an X frame stand at 720 mm: a sloped control panel with six knobs, a display and a pitch strip over a keybed of weighted naturals and sharps, on a crossed tube frame with rubber feet.