Free models · Game-ready GLB
Low poly
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
4,381 free GLB models
Tipping Bucket Rain Gauge (Radio Telescope Array and Field Station)
A tipping bucket rain gauge on a short post: the collecting funnel in its housing, the logger box on the post and a small concrete footing.
AnimatedBattery Shed (Radio Telescope Array and Field Station)
The battery room for the station: a ventilated white unit with intake slots across the front, a roof extract unit and a hinged door.
AnimatedWeather Mast with Anemometer (Radio Telescope Array and Field Station)
A five metre lattice weather mast carrying a three cup anemometer that turns on its own node, a radiation shielded temperature probe and the logger box at the foot.
Bulk Fuel Tank (Radio Telescope Array and Field Station)
The bunded fuel tank that feeds the generator: a horizontal vessel on concrete saddles with end bands, a fill point on top, a dispensing cabinet and a guard rail along the front.
Solar Panel Array (Radio Telescope Array and Field Station)
A four module ground mounted solar array on a fixed tilted frame, with the string box at one end, sized to top up the station batteries between generator runs.
Cryogenic Receiver Dewar (Radio Telescope Array and Field Station)
The vacuum dewar a cooled receiver lives in: an insulated vessel on four legs with a clamped flange, the cold head on top and two transfer lines rising from it.
AnimatedDiesel Generator Shed (Radio Telescope Array and Field Station)
The standby generator shed: a lined unit with louvred air intakes, a radiator discharge on the front, an exhaust stack through the roof and a hinged door.
AnimatedHelium Compressor Shed (Radio Telescope Array and Field Station)
The shed that holds the compressors for the cooled receivers: a small blockwork unit with louvred intakes down one side, an exhaust fan and a hinged door.
AnimatedSignal Equipment Rack (Radio Telescope Array and Field Station)
A floor standing signal rack: seven blank equipment faces with indicator blocks, a fan tray on the roof and two mesh doors that swing open from the middle.
Control Room Cabin (Radio Telescope Array and Field Station)
The cabin the station is run from: an open fronted unit under a deep roof with a desk across the back wall, three blank screens on stands, a shelf and a stool.
AnimatedSignal Junction Pit (Radio Telescope Array and Field Station)
A cast junction pit where trench runs meet: a chamber with three cable ways across it, a red marker plate on the front and a steel lid hinged on its back edge that lifts open.
AnimatedCorrelator Cabin (Radio Telescope Array and Field Station)
The cabin that holds the correlator: a five metre insulated unit on a plinth with roof mounted cooling units, an equipment intake on the front and a hinged personnel door.
Guyed Mast with Anchors (Radio Telescope Array and Field Station)
A nine metre triangular lattice mast with a climbing ladder, a whip on the headframe and three guys running down to their own cast anchor blocks with lifting eyes.
Cable Trench Cover Run (Radio Telescope Array and Field Station)
The precast cover that closes a cable trench: four slabs laid end to end with lifting eyes and the edge strips that seat them, ported to the same four metre module as the trench.
Open Cable Trench Section (Radio Telescope Array and Field Station)
A four metre run of open cable trench: concrete kerbs either side, a sand bed between them, three bundled cables on it and the steel straps that hold them down.
Dipole Array Panel (Radio Telescope Array and Field Station)
A flat eight element dipole array on a reflecting screen: two rows of crossed dipoles on stand-offs, a braced frame behind them and the combiner box at the foot.
Log Periodic Antenna (Radio Telescope Array and Field Station)
A log periodic boom antenna on a short mast: nine elements shortening towards the feed end, staggered either side of the boom, with the balun box at the back.
Dish Feed Horn and Quadripod (Radio Telescope Array and Field Station)
A spare dish feed assembly on its transport frame: the flared horn, the receiver box behind it and the four legs that carry it at the focus, stood on a concrete pad.
AnimatedDish Transporter (Radio Telescope Array and Field Station)
The six wheeled low loader that moves a reflector across the site: a cab, a dropped bed with a cradle ring and stabiliser legs, and six wheels that roll on their own nodes.
Small Horn Antenna (Radio Telescope Array and Field Station)
A pyramidal horn antenna on a three leg stand: four flared panels opening forward from a waveguide throat, with the receiver box behind it, standing on its own pad.
Dish Rail Track Section (Radio Telescope Array and Field Station)
A six metre section of the rail a movable dish traverses: a ballast bed, sleepers across it and two rails on chairs, ported end to end so a run is as long as the site needs.
AnimatedRail Bogie for a Movable Dish (Radio Telescope Array and Field Station)
The powered carriage a movable dish rides on: a welded deck with the turret bearing on top, drive boxes on both ends and four flanged wheels, traversing along its rails as one node.
Dish Pedestal Base (Radio Telescope Array and Field Station)
The pedestal a dish stands on, on its own: a stepped concrete foundation, a tapered column with a service door, a climbing ladder and the bolted bearing ring that takes the turret.
Dish Counterweight Block (Radio Telescope Array and Field Station)
A ballast block for the back of a dish yoke: a cast mass in a steel frame with a lifting eye on top, banded red, resting on its own pad.