Free models · Game-ready GLB
Interior
Every stylized model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
818 free GLB models
Airbag Landing Block (Trampoline Park and Soft Play)
A 2.6 by 2 m airbag landing block 850 mm deep: a blue stitched bag with a crowned top, three pale seam lines, an amber chevron band along the approach edge and grey anchor pads at the corners, for the landing under a performance bed or a drop tower.
Balance Beam over the Pit (Trampoline Park and Soft Play)
A 3.2 m padded balance beam at 650 mm on two steel A frames with wide sole plates: a magenta beam with a grey grip top, for the crossing laid over the end of a foam pit where falling off is the point.
Tumble Track Lane (Trampoline Park and Soft Play)
A 4.4 m tumble track 1.6 m wide: a sprung black rod floor in a steel frame on six legs, with lime pads all round and an amber run in mat at the +Z end, 400 mm to the track surface, for the tumbling lane that feeds a foam pit.
AnimatedBasketball Dunk Hoop over a Bed (Trampoline Park and Soft Play)
A 3 m dunk hoop for the back edge of a trampoline bed: a magenta padded post with a cranked arm, a pale backboard in a blue frame and an amber rim on a tipping bracket with its net hanging from it.
Foam Pit Frame with Foam Cubes (Trampoline Park and Soft Play)
A 3 m square foam pit 900 mm deep: a steel box on a grey base with blue padded coping rails all round, heaped with thirty 240 mm foam cubes in magenta, lime and amber, for the landing at the end of a tumble track or under an angled bed.
Dodgeball Court Divider Net Frame (Trampoline Park and Soft Play)
A 2 m net divider 2.6 m tall: two steel posts in lime padded sleeves under a head rail, strung with a black cord mesh and capped in lime, for dividing a run of beds into a dodgeball court with a service line down the middle.
Safety Pad Strip (Trampoline Park and Soft Play)
A 2 m safety pad strip 300 mm wide: an amber bolster on two steel legs and a spine rail, topped with a grey grip strip at exactly bed pad height, so a court of beds is separated and walked between. Ported to a bed on both long sides and to another strip at both ends.
Court Edge Platform (Trampoline Park and Soft Play)
A 2 m walkway platform at court height, 1.4 m deep: a grey carpeted deck on a steel frame with a blue kick band on three sides and a half height step out at the front, for the raised edge a court is entered from. Ported at both ends so a run of them frames a court.
Safety Pad Strip, Magenta (Trampoline Park and Soft Play)
The 2 m safety pad strip in magenta, for alternating the runs across a court so a large floor does not read as one length repeated.
Wall Trampoline Module (Trampoline Park and Soft Play)
A 2 m wall trampoline 2.4 m tall: an upright black bed on a raked steel back frame with magenta side and head pads and a deep kicker along the floor, for the wall a jumper runs at. Ported at both ends of the hall wall run.
Trampoline Bed Module (Trampoline Park and Soft Play)
A 2 m trampoline bed module, 900 mm to the pad top: four legs on spreader plates under a boxed steel frame, a grey spring band round a black bed and blue bolster pads capping all four rails. Ported on every rail, so a court is tiled from repeats of one model.
Angled Trampoline Module (Trampoline Park and Soft Play)
A 1.9 m trampoline bed raked at 20 degrees on a braced steel stand, lime padded, 1.4 m to the high rail: the incline a jumper uses to change direction across a court, or to feed a foam pit.
Performance Trampoline (Trampoline Park and Soft Play)
A competition height trampoline: the 2 m bed on a 1.18 m frame with corner braces, a spreader base and an amber access step, magenta padded, for the performance bed a park keeps for coaching and for the airbag run in.
Trophy Set (Go Kart Track and Pit Lane)
Set of three trophies on a presentation tray: a gold, a silver and a bronze cup on stepped plinths, the tallest 0.65 m, each with two handles. Blank castings with no engraving, ready to stand on a podium or a reception counter.
AnimatedVending Machine (Go Kart Track and Pit Lane)
Red drinks and snack vending machine 1.92 m tall with a yellow header, a glazed door showing three shelves of stock, a dispensing flap and a handle. The door swings on its own hinge; the stock is modelled into the door and travels with it.
Kart Club Reception Counter (Go Kart Track and Pit Lane)
Reception desk for a karting club: a 3.4 m blue counter with a return, a pale worktop, a yellow rail along the public face, a till and card reader, and a results board on posts behind it. Static geometry, nothing opens.
Racing Helmet (Go Kart Track and Pit Lane)
Single full face karting helmet 0.33 m across, red shell with a dark visor band, a chin bar and a small rear spoiler, resting on its own padded ring so it sits level on a shelf, a bench or a tyre stack.
Race Suit on a Hanger (Go Kart Track and Pit Lane)
A single red race suit on a hanger on a weighted floor stand 1.9 m tall, with a black chest band, a yellow flash and a wire hook over the rail. One rigid piece: the suit is solid geometry and does not drape or move.
Helmet and Race Suit Rack (Go Kart Track and Pit Lane)
Hire kit rack 1.9 m wide: two race suits on hangers under a helmet shelf holding two helmets, with a boot shelf below and a welded steel frame. Suits and helmets are modelled solid and none of it moves.
Driver Briefing Board (Go Kart Track and Pit Lane)
Free standing briefing board on an A frame: a white 1.9 m panel under a red header, with a track map blocked out on the left, four ruled lines on the right and a pen tray along the bottom. Markings are plain shapes and carry no wording.
AnimatedAir Line Reel (Go Kart Track and Pit Lane)
Free standing air line reel on a 2.1 m post: a red drum on a bracket that spins on its own pivot, a blue hose run down to the gun and a compressor box at the foot. The hose itself is one rigid solid, so it does not pay out with the drum.
Tool Trolley (Go Kart Track and Pit Lane)
Red four drawer tool trolley on four castors with a steel worktop, a push handle and a few tools left on the lid. Drawers and castors are modelled solid on this one and do not open or turn; the pit garage bay is what carries a moving part.
Kart Storage Rack (Go Kart Track and Pit Lane)
Two tier steel storage rack 1.5 m wide holding two hire chassis, one red and one blue, on runner shelves with edge lips and a red top rail. The stored chassis are simplified to tray, seat, nose and wheels and do not move.
AnimatedPit Garage Bay Module (Go Kart Track and Pit Lane)
One 5 m pit garage bay, 6 m deep and 3.1 m to the roof: half thickness party walls, a back wall with a steel bench, a strip light, a blue header with a bay number plate and a ribbed roller shutter that lifts in its guides.