Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
6,058 free GLB models
Drum Throne (Music Recording Studio and Instruments)
The same stool built as a drum throne: a wider, deeper padded seat at 550 mm on a three leg frame, which is the height and the spread a kit is played from.
Studio Stool (Music Recording Studio and Instruments)
A 660 mm padded studio stool: a round upholstered seat on a four leg steel frame with a foot ring and rubber tips, for a guitarist, an engineer or a spare seat at the desk.
Music Stand (Music Recording Studio and Instruments)
A folding music stand at 1.06 m with a sheet on its desk: a perforated steel desk on a raked hinge, a telescopic column and a rubber footed tripod.
Acoustic Ceiling Cloud (Music Recording Studio and Instruments)
A 1.2 by 0.9 m absorber cloud on four hanging wires: a timber frame wrapped in grey fabric with 550 mm of wire above it and ceiling anchors. The origin is at the bottom of the panel, so placing it at the ceiling height less the drop hangs it correctly.
Patch Bay Panel (Music Recording Studio and Instruments)
A 2U 19 inch patch bay: 48 quarter inch jacks in two rows of 24 with designation strips between them, on a rack panel with mounting ears. It stands on its bottom edge so it can be dropped straight into a rack.
Monitor Controller (Music Recording Studio and Instruments)
A desktop monitor controller, 200 by 170 mm: a weighted wedge with a large volume encoder in a ring, four source and mute buttons and a small meter display.
Headphones on a Wall Hook (Music Recording Studio and Instruments)
A pair of closed back studio headphones hanging on a wall hook: a padded headband, two swivel cups with fabric pads and an alloy yoke, on a screwed wall plate. The plate sits flat against the wall with the hook 75 mm proud of it.
Studio Desk with Screen Pair (Music Recording Studio and Instruments)
A 1.6 m studio desk in dark timber with a steel underframe, a lower shelf and a modesty panel, carrying a pair of 24 inch screens on their feet, a keyboard and a mouse. The screens are turned in toward the engineer.
Mixing Console (Music Recording Studio and Instruments)
A 1.98 m analogue mixing console on timber side cheeks: sixteen channel strips of four knobs, a switch and a 100 mm fader on a raked bay, a master section, a meter bridge with two meter windows, and an armrest along the engineer side. It stands 1.02 m to the top of the bridge.
Studio Monitor on a Stand (Music Recording Studio and Instruments)
A two way nearfield studio monitor on a 940 mm pole stand: a 240 by 370 mm cabinet with a six inch woofer, a waveguide tweeter, a rear facing port tube and a status lamp, tipped back on a cast plate base.
Vocal Microphone with Pop Shield (Music Recording Studio and Instruments)
A vocal microphone at 1.54 m on a straight stand: a large diaphragm capsule in an elastic shockmount, with a 150 mm pop shield on a gooseneck clamped to the column, over a telescopic column and a rubber footed tripod.
Bass Amplifier Stack (Music Recording Studio and Instruments)
A bass rig 1.24 m tall: an eight by ten inch speaker cabinet with a grille cloth, metal corner caps and rubber feet, under a rackmount amplifier head with seven knobs, a meter window and a status lamp.
Boom Stand, Empty (Music Recording Studio and Instruments)
The same counterweighted boom stand with an empty clip, for a source that already has its own microphone or for dressing a corner of the live room.
Microphone on a Boom Stand (Music Recording Studio and Instruments)
A counterweighted boom stand at 1.42 m with a large diaphragm microphone in its clip, angled down over a source 620 mm out from the column. The base is a rubber footed tripod and the column is telescopic.
Guitar Pedal Board (Music Recording Studio and Instruments)
A sloped 620 by 320 mm pedal board carrying five effects pedals in coloured enclosures, each with two knobs, a footswitch and a status lamp, patched together with short jumper leads.
Synth Keyboard on an X Stand (Music Recording Studio and Instruments)
A 61 note synthesiser on an X frame stand at 720 mm: a sloped control panel with six knobs, a display and a pitch strip over a keybed of weighted naturals and sharps, on a crossed tube frame with rubber feet.
Guitar Amplifier Combo (Music Recording Studio and Instruments)
A 1x12 valve combo guitar amplifier, 620 by 555 by 260 mm: a covered cabinet with a cream grille cloth over a twelve inch driver, metal corner caps, a strap handle, rubber feet and a top mounted control panel with six knobs, a pilot lamp and an input jack.
Upright Piano (Music Recording Studio and Instruments)
A 1.46 m upright piano in dark timber: a lidded carcass with a fall board, a hinged music desk, a keybed of naturals and sharps, a toe block with three brass pedals and four castors. It stands 1.31 m to the top.
Bass Drum with Two Rack Toms (Music Recording Studio and Instruments)
A 22 inch bass drum in a gloss red finish on its spurs, with a badge ring on the front head, eight tube lugs and counter hoops, carrying a 12 and a 13 inch rack tom on a mount post and arms tipped toward the player. Together they are the front of a five piece kit.
Snare Drum on a Stand (Music Recording Studio and Instruments)
A 14 by 5.5 inch brushed steel snare drum held in a three-armed basket stand at 620 mm, with eight tube lugs, counter hoops, a strainer and a throw-off lever. The stand is a tripod on rubber feet with a telescopic column.
Floor Tom (Music Recording Studio and Instruments)
A 16 by 14 inch floor tom in a gloss red finish on three rubber tipped legs, with eight tube lugs, counter hoops and leg brackets. It stands 600 mm to the batter head, which is where a five piece kit puts it.
Electric Guitar on a Stand, Natural Finish (Music Recording Studio and Instruments)
The same solid body electric guitar and A-frame stand in a natural timber finish, for a second guitar in a rack without a repeated colour.
Acoustic Guitar on a Stand (Music Recording Studio and Instruments)
A dreadnought acoustic guitar on a folding A-frame stand: a 500 mm waisted timber body 115 mm deep with a rosetted sound hole, a pin bridge with a bone saddle, a 19 fret neck, a headstock with six machine heads and six strings from bridge to nut.
Electric Guitar on a Stand (Music Recording Studio and Instruments)
A solid body electric guitar in a gloss red finish on a folding A-frame stand: a waisted double cutaway body 460 mm long, two humbuckers, a scratchplate, a bridge, three controls and a jack, a 21 fret neck, a machine head headstock and six strings from bridge to nut.