Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,478 free GLB models
Office desk 1800 on A-frame legs (Downtown Office Interiors)
A 1.8 m by 0.8 m office desk at 730 mm on welded A-frame tubular legs, with a spine beam, twin rear grommets, a cable basket and a low modesty panel.
Sit-stand desk, lowered (Downtown Office Interiors)
The same 1.6 m height-adjustable desk with its telescopic columns collapsed to the 730 mm seated height.
Sit-stand desk, raised (Downtown Office Interiors)
A 1.6 m by 0.8 m height-adjustable desk shown at its 1.16 m standing height, on three-stage telescopic columns with splayed feet, a hand controller and a cable basket.
Height-adjustable desk frame (Downtown Office Interiors)
A bare height-adjustable desk frame at mid travel: two three-stage telescopic columns, splayed cast feet, a top rail and a cable basket, ready to take any 1.4 to 1.8 m top.
Corner desk with left return (Downtown Office Interiors)
An L-shaped corner desk: a 1.6 m main run and a 0.8 m by 1.2 m left return joined by a radiused inside corner, carried on a panel end, two A-frame legs and a spine beam.
Practice floor mat (Clinic and Veterinary Practice)
A 1.4 m entrance floor mat: a ribbed rubber field on a bevelled edge surround with a coloured border.
Clinical hand wash basin (Clinic and Veterinary Practice)
A wall-hung clinical hand wash basin on floor-reaching mounting rails: a shaped deck with a real recessed bowl, a strainer waste and bottle trap, an elbow-lever mixer, a splashback and soap and paper towel dispensers.
AnimatedStaff kitchenette run (Clinic and Veterinary Practice)
A 1.2 m staff kitchenette: a base run on a recessed plinth with two named doors, a worktop with a real bowl aperture and recessed sink, a gooseneck mixer, an upstand, a named wall unit above, a kettle and two mugs.
Coat hook rail (Clinic and Veterinary Practice)
A 700 mm coat hook rail: a chamfered timber board with five double tube hooks on backplates.
Practice wall clock (Clinic and Veterinary Practice)
A 320 mm practice wall clock: a chamfered case with a domed glass, a plain dial with twelve markers, hour, minute and coloured second hands and a centre boss.
AnimatedStaff locker bank (Clinic and Veterinary Practice)
A six-door staff locker bank: a carcass on a steel plinth with a sloping top, dividers and shelves, and six named doors each with a lever latch, a lock barrel, a perforated vent panel and a blank number card.
Mop and cleaning station (Clinic and Veterinary Practice)
A cleaning station: a mop bucket on four castors with a side-press wringer and a push handle, and a floor-reaching wall rail with a mop and a broom in spring clips.
Wayfinding sign totem (Clinic and Veterinary Practice)
A floor-standing wayfinding totem: a weighted chamfered base, an aluminium panel with edge posts, five blank direction strips with arrow tabs and a coloured header band.
Wall poster frame (Clinic and Veterinary Practice)
A snap-frame poster holder: a chamfered aluminium frame with a clear cover over a blank poster with a coloured header band and four blank text rules.
Room name plate (Clinic and Veterinary Practice)
A 300 mm door name plate: a chamfered aluminium tray with a blank insert card, a coloured status strip and two fixing bosses, on a small top shelf return.
AnimatedKennel bank, small, one door open (Clinic and Veterinary Practice)
The six-bay small kennel bank with the middle lower door swung open on its hinge, showing the bay, the sloped tray and the drain lip.
Animal transport crate, door open (Clinic and Veterinary Practice)
The animal transport crate with its barred door swung open on the hinge, showing the moulded interior and bed pad.
Dog run corner post (Clinic and Veterinary Practice)
A dog run corner post: a chamfered square section post on a levelling pad with a domed cap and two pairs of panel brackets with fixing pins, turning a run through 90 degrees.
AnimatedDog run gate (Clinic and Veterinary Practice)
A 1 m dog run gate on the same grid: a posted frame carrying a named hinged leaf with a kick plate, mesh infill, a cam latch and a drop bolt.
Walk-in dog run panel (Clinic and Veterinary Practice)
A 1 m walk-in dog run panel: square section posts on levelling pads, a solid kick panel to 400 mm and a welded mesh infill in a chamfered frame.
Bedding and litter store (Clinic and Veterinary Practice)
A four-deck bedding and litter store bay on tube posts: rod front rails, litter sacks on the lowest deck, rolled bedding above and folded blankets on the third deck.
AnimatedFeed bin set (Clinic and Veterinary Practice)
Three wheeled feed bins on castors: tapered moulded bodies with base rails, blank content cards, named hinged lids with grab handles and a scoop hooked on the end bin.
AnimatedSmall animal hutch rack (Clinic and Veterinary Practice)
A three-tier small animal hutch rack on castors: welded mesh sides, backs and roofs, mesh front frames, litter trays sliding out under each mesh floor and a capping deck.
Animal transport crate (Clinic and Veterinary Practice)
A moulded two-piece animal transport crate: a chamfered base and lid on a joint rail with side vent slots, a top grab handle, a barred door in a surround on a named pivot with a twist latch, and a bed pad.