Free models · Game-ready GLB
Interior
Every model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
7,478 free GLB models
Fifty litre keg (Bar, Pub and Brewery Taproom)
A 50 litre stainless keg: rolled top and bottom chimes with handle webs, a bilged body with a rolled mid rib, and a recessed neck well with an extractor spear valve.
Firkin cask (Bar, Pub and Brewery Taproom)
A timber firkin lying on its side: a staved bilged body with four steel hoops, flat heads, a shive bung on the crown and a keystone boss in the end head.
Two tier cask stillage (Bar, Pub and Brewery Taproom)
The cask stillage in a two tier configuration: a second cradle deck 420 mm above the first on continued uprights, for stacking casks in a working cellar.
Single hand pull (Bar, Pub and Brewery Taproom)
A single cask hand pull: bar-top C-clamp, polished barrel, swan-neck spout, long curved lever with a ball grip and a blank pump clip, over its own drip tray.
Cask stillage frame (Bar, Pub and Brewery Taproom)
A 1.2 m steel cask stillage: two cradle rails on box-section legs with diagonal braces, four vee chocks that hold a cask level, and rubber floor pads.
Hand pull set of three (Bar, Pub and Brewery Taproom)
Three cask hand pulls on the bar top: each a chrome C-clamp gripping the bar, a polished barrel with a beaded shoulder, a swan-neck spout, a long curved lever on a bearing yoke ending in a turned ball grip, and a blank oval pump clip on its bracket. Drip tray in front.
Six tap T bar font (Bar, Pub and Brewery Taproom)
A T bar dispense font: a lathed chrome post on a stepped base carrying a horizontal cross tube with domed end caps and six cast taps with blank clip holders, over a 780 mm drip tray.
Single tap font (Bar, Pub and Brewery Taproom)
A slim single tap font: a lathed 110 mm column on a stepped base with one cast tap and a turned handle over a small slotted drip tray.
AnimatedUnder-bar till drawer unit (Bar, Pub and Brewery Taproom)
A 460 mm under-bar cash drawer unit: a stainless case on short feet, a sliding drawer with a recessed pull, a lock barrel and four coin trays visible through the top opening.
AnimatedUndercounter ice maker (Bar, Pub and Brewery Taproom)
A 560 mm undercounter ice maker: a machine head with a louvred condenser over an insulated bin behind a lift-up door, with a punched vent band and a status lamp strip.
Eight tap keg font (Bar, Pub and Brewery Taproom)
An eight tap keg font: a taller lathed column carrying two tiers of four cast taps with turned handles, on a stepped base with a wide slotted drip tray.
Four tap keg font (Bar, Pub and Brewery Taproom)
A four tap keg font: a stepped chrome base, a lathed swelling column and four individually cast taps splayed around the front arc with turned handles, over a slotted drip tray.
Stacking glass crate (Bar, Pub and Brewery Taproom)
A moulded stacking glass crate: a slotted 400 mm skirt with a stacking lip, a four by four divider grid and recessed hand grips on two sides.
Bar dump sink (Bar, Pub and Brewery Taproom)
A 340 mm dump sink on a leg frame: a deep pressed bowl with a perforated strainer basket and a sprung spray rinser on a coiled hose.
Bar blender station (Bar, Pub and Brewery Taproom)
A bar blender on a sound enclosure: a chamfered motor base with a membrane control panel, a tapered jug with a strap handle and lid, and a clear acoustic cowl over the top.
Under-bar double sink (Bar, Pub and Brewery Taproom)
A 1 m under-bar double sink: two real pressed bowls in a stainless deck, a ribbed drainer, a rear splashback with a rolled top, an undershelf and a swan-neck mixer with lever handles.
Cocktail station insert (Bar, Pub and Brewery Taproom)
A 900 mm cocktail station: a stainless deck with a deep ice well aperture, a divided garnish tray, a hung speed rail on the customer side, a glass rinser and a cutting board.
AnimatedUnder-bar waste chute (Bar, Pub and Brewery Taproom)
A waste chute station: a deck plate aperture with a hinged flap, a tapered stainless throat and a lined bin below on a leg frame.
Under-bar bottle step (Bar, Pub and Brewery Taproom)
A 700 mm three tier stainless bottle step: stepped shelves with lipped fronts on folded end cheeks, on a slotted base tray.
Two tier speed rail (Bar, Pub and Brewery Taproom)
A 620 mm two tier bottle speed rail: folded stainless channels with lipped fronts on stepped brackets and a clamp plate that hooks over the bar front.
AnimatedUnder-bar ice well (Bar, Pub and Brewery Taproom)
A 560 mm insulated ice well on a stainless leg frame: a deck plate with a real aperture, a deep pressed pan with bottle dividers standing in it, an undershelf and a hinged insulated lid with a lift handle.
AnimatedUndercounter keg fridge (Bar, Pub and Brewery Taproom)
A 620 mm undercounter keg fridge: an insulated solid door on barrel hinges, a thermostat fascia, a font mounting boss and a lagged python gland rising from the top deck.
AnimatedUndercounter bottle fridge (Bar, Pub and Brewery Taproom)
A 920 mm undercounter bottle fridge: two glazed doors on barrel hinges with full-height bar handles, three lipped wire shelves inside and a louvred condenser grille under the top deck.
Condiment and garnish rail (Bar, Pub and Brewery Taproom)
A counter-mounted garnish rail: a stainless frame with four divided openings, four tapered garnish pots with rolled rims and a pair of clamp brackets under the bar top.