Free models · Game-ready GLB
Modern
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
14,038 free GLB models
Pagoda Roof Kiln Vent (Distillery and Bonded Warehouse)
Pagoda kiln vent 3.6 m square at the eaves and 3.8 m tall: a slated tapering roof in two stages with a louvred lantern of four faces between them, boarded eaves on all four sides and a plain iron finial. Stands over a kiln, on a wall head or astride a roof ridge.
Slate Roof Section (Distillery and Bonded Warehouse)
Four metre pitched slate roof run spanning 5.2 m and rising 1.5 m to the ridge: a slated gable body with seven laid courses on each slope, timber eaves boards, gutters, rafter feet and a ridge course over the joint. Sits on two wall heads and lays end to end with the next run.
Stillhouse Window Bay (Distillery and Bonded Warehouse)
Four metre wall bay with a 2.6 x 3.0 m industrial window: a dressed sill and lintel, an iron frame of twenty lights with glazing bars, and rubble facing above and below. Lets the stillhouse be seen into, and lays end to end with the plain wall bay.
AnimatedWarehouse Door Pair (Distillery and Bonded Warehouse)
Four metre warehouse doorway with a 2.6 m opening under a 3.4 m lintel: dressed jambs, a threshold and two boarded and strapped leaves, painted, that swing out on their outer stiles. Sits in a wall run and carries a wall port at either end.
Corner Pillar (Distillery and Bonded Warehouse)
Dressed stone corner pillar 0.6 m square and 4.8 m tall with a capping stone: quoined courses on all four faces and a wall port on each side, so it turns a corner, ends a run or joins two runs in line.
Wall Section (Distillery and Bonded Warehouse)
Plain four metre rubble wall bay 4.6 m to the head and 0.4 m thick, faced on both sides, with a plinth course, a string course at 2.3 m and a capping course. The base module of the stillhouse and the warehouse, laid end to end between corner pillars.
Bonded Warehouse Wall Run (Distillery and Bonded Warehouse)
Four metre rubble wall bay 4.6 m to the head and 0.4 m thick, faced both sides: a battered plinth course, a capping course, a louvred ventilation grille in a dressed surround and two barred slit vents low down. Lays end to end and meets a corner pillar at either end.
Pallet of Casks (Distillery and Bonded Warehouse)
Four barrels stood on end on a 1.5 x 1.2 m timber pallet and strapped in two bands, 1.05 m tall overall. Every head is blank. Ready for a lorry bed, a loading bay or a corner of a filling store.
AnimatedCharring Drum (Distillery and Bonded Warehouse)
Charring drum 2.2 m between frames and 1.7 m tall: a perforated iron drum 1.5 m long turning on a shaft over a hearth pan and fire bars, in a braced frame with a crank handle at one end. The fire is not modelled; the drum turns on its axis.
Hoop Stack (Distillery and Bonded Warehouse)
Stack of iron cask hoops on a timber pallet, 1.5 x 0.9 m and 0.65 m tall: seven wide chime hoops in one pile, six smaller ones in another and three more leaning against them. Cooperage stock; the hoops are one static body each.
Stave Bundle (Distillery and Bonded Warehouse)
Bundle of sawn oak staves 0.75 m across and 1.5 m tall, stood on end and tied with two iron hoops, with five more staves laid flat beside it. Raw cooperage stock for a yard, a stave store or a cooperage floor.
Cooperage Anvil and Croze (Distillery and Bonded Warehouse)
Cooper’s working set on a 1.3 x 0.9 m footprint: a hooped oak block carrying a stake anvil with its horn, a croze with its fence and cutter laid on a low bench beside it, and a hand adze leaning against the block. Static tools; nothing here moves.
AnimatedStencil Bench (Distillery and Bonded Warehouse)
Stencil bench 1.6 x 0.75 m and 0.88 m to the top: an oak bench with a back board, four blank stencil plates hung on it, a stack of blanks and an ink tray on the top, two brushes and a drawer of spare plates below. Every plate is cut with nothing at all.
AnimatedCask Hoist Rail with Chain Block (Distillery and Bonded Warehouse)
Overhead hoist 4.2 m between posts and 3.7 m to the top of the rail: two braced posts on pads, a rolled beam and a chain block on its trolley whose body and hook lift on the rail. The hand chain and the fall are one static body, because chain links need a joint each.
Bung Mallet and Driver (Distillery and Bonded Warehouse)
Cooper’s bung mallet and hoop driver on a 1.1 x 0.8 m footprint: a turned oak mallet head on its handle lying on the floor, an iron driver beside it and three spare bungs. Small floor dressing for a filling store or a cooperage.
AnimatedRacking Bench (Distillery and Bonded Warehouse)
Filling store racking bench 2.0 x 0.85 m and 0.92 m to the top: an oak bench on a braced frame, a let in drip tray, a standard carrying the filling head and its cock, a drawer of fittings on runners and loose bungs on the top.
Dunnage Cask Stack (Distillery and Bonded Warehouse)
Three hogsheads stacked two over one on timber runners, 2.4 x 1.0 m and 1.7 m tall, with chocks between the tiers and a wedge at each end. Every head is blank. The way a dunnage floor is filled where there is no rack.
Cask Rack, Three Tier (Distillery and Bonded Warehouse)
Timber dunnage rack 2.4 m long and 3.1 m tall: two braced end frames on stone pads, a head beam and three tiers of paired runners with oak chocks, each tier taking two casks. The full height a dunnage floor is racked to, and it lays end to end with the two tier rack.
Cask Rack, Two Tier (Distillery and Bonded Warehouse)
Timber dunnage rack 2.4 m long and 2.1 m tall: two braced end frames on stone pads, a head beam and two tiers of paired runners with oak chocks on them, each tier taking two casks lying on their sides. Racks lay end to end down a warehouse floor.
Cask End, Blank Stencil (Distillery and Bonded Warehouse)
Loose oak cask head 0.88 m across on a low timber stand, leaning back so the face is in view: boarded head, a chime hoop and a blank stencil plate propped beside it. The face is deliberately empty, with no name, number, date or mark of any kind on it.
Cask, Barrel (Distillery and Bonded Warehouse)
Oak barrel 0.88 m long and 0.62 m across the bilge, lying on its side: six driven iron hoops, recessed blank heads and a bung in the bilge. The smallest of the three cask sizes, and the one a single person can roll and upend.
Cask, Butt (Distillery and Bonded Warehouse)
Oak butt 1.35 m long and 0.98 m across the bilge, lying on its side: six driven iron hoops, recessed heads at both ends and a bung in the bilge. Both heads are completely blank, with no stencil, mark or lettering anywhere on the cask.
Cask, Hogshead (Distillery and Bonded Warehouse)
Oak hogshead 1.05 m long and 0.76 m across the bilge, lying on its side: six driven iron hoops, recessed blank heads and a bung in the bilge. The middle size between the butt and the barrel, for racking three high in a dunnage warehouse.
Weighbridge Plate (Distillery and Bonded Warehouse)
Flush weighbridge 5.3 x 3.9 m: a steel deck plate with wear bars, a cast frame set into a concrete surround, guide kerbs down both sides and an indicator post with a blank read-out face. Deck is level with the yard, so a lorry drives straight on.