Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,345 free GLB models
Cantilever meeting chair (Downtown Office Interiors)
A sprung cantilever meeting chair: a continuous tubular sled frame, a piped seat cushion, a welted back pad on twin stems and open loop arms.
Stacking side chair (Downtown Office Interiors)
A stacking side chair: a moulded polypropylene seat and waisted back on a four-leg tubular frame with cross rails and stacking bumpers.
Meeting chair on castors (Downtown Office Interiors)
A meeting chair on a four-star castor base: a moulded seat shell with a piped cushion, a low welted back pad and shaped side arms.
Executive chair with headrest (Downtown Office Interiors)
A high-back executive chair: deep welted back and seat cushions on a moulded shell, a stemmed headrest, wrap-around tubular arms with pads and a five-star castor base.
Task chair with mesh back, armless (Downtown Office Interiors)
The mesh-back task chair without arms, for bench positions where arms foul the desk edge.
Task chair, upholstered back (Downtown Office Interiors)
An upholstered-back office task chair: five-star castor base, piped seat and welted back cushions on a moulded shell, and fixed loop arms with soft pads.
Task chair with mesh back (Downtown Office Interiors)
A 0.66 m wide office task chair: five-star castor base, gas lift with a paddle-lever mechanism, a piped seat cushion, a tensioned mesh back in a loop frame with a lumbar slider, and height-adjustable T arms.
Bench desk end bay (Downtown Office Interiors)
A 1.8 m single-position bench end bay closed with laminate panel ends, for finishing either end of a bench run; tops at 730 mm, 800 mm deep, with a cable basket and modesty panel.
Bench desk, six positions with cable spine (Downtown Office Interiors)
A back-to-back six-position bench desk run: three 1.4 m positions each side, 1.6 m overall depth, with a lidded central cable spine, four A-frame legs and six cable baskets.
Bench desk, back-to-back pair (Downtown Office Interiors)
A single back-to-back bench desk pair: two 1.6 m positions facing each other across a lidded cable spine, 1.6 m overall depth, on two A-frame legs.
Hot-desk touchdown bar (Downtown Office Interiors)
A 2.4 m by 0.6 m hot-desk touchdown bar at 1.05 m on four turned posts with tubular foot rails, two grommets and a rear cable trough.
Bench desk, two positions (Downtown Office Interiors)
A single-sided two-position bench desk run: 3.2 m of 1.6 m positions, 800 mm deep, tops at 730 mm on A-frame legs with a spine beam, cable baskets, grommets and a back modesty panel.
Bench desk, four positions (Downtown Office Interiors)
A single-sided four-position bench desk run: 5.6 m of 1.4 m positions, 800 mm deep, on end and mid A-frame legs with a full-length spine beam, cable baskets and a back modesty panel.
Standing meeting table (Downtown Office Interiors)
A 1.8 m by 0.9 m standing meeting table at 1.05 m on tapered round legs with an H stretcher and a central 100 mm cable grommet.
Single touchdown pod (Downtown Office Interiors)
A 0.9 m single-person standing touchdown pod: a laminate ledge at 1.05 m on panel ends, a felt-faced acoustic upstand and a small upper shelf.
AnimatedExecutive desk with modesty panel (Downtown Office Interiors)
A 2.0 m by 0.9 m executive desk on a laminate plinth base with a recessed dark plinth, a full modesty panel, an inset timber top and a three-drawer bank.
Office desk 1600 with panel ends (Downtown Office Interiors)
A 1.6 m by 0.8 m office desk at 730 mm on full-height laminate panel ends, with a modesty panel, an under-desk cable basket and a rear cable grommet.
120 degree three-wing workstation (Downtown Office Interiors)
A three-wing 120 degree workstation pod: three 1.1 m worksurfaces on a shared turned centre post, each with an A-frame outer leg and a fabric privacy upstand.
Office desk 1800 on A-frame legs (Downtown Office Interiors)
A 1.8 m by 0.8 m office desk at 730 mm on welded A-frame tubular legs, with a spine beam, twin rear grommets, a cable basket and a low modesty panel.
Sit-stand desk, lowered (Downtown Office Interiors)
The same 1.6 m height-adjustable desk with its telescopic columns collapsed to the 730 mm seated height.
Sit-stand desk, raised (Downtown Office Interiors)
A 1.6 m by 0.8 m height-adjustable desk shown at its 1.16 m standing height, on three-stage telescopic columns with splayed feet, a hand controller and a cable basket.
Height-adjustable desk frame (Downtown Office Interiors)
A bare height-adjustable desk frame at mid travel: two three-stage telescopic columns, splayed cast feet, a top rail and a cable basket, ready to take any 1.4 to 1.8 m top.
Corner desk with left return (Downtown Office Interiors)
An L-shaped corner desk: a 1.6 m main run and a 0.8 m by 1.2 m left return joined by a radiused inside corner, carried on a panel end, two A-frame legs and a spine beam.
Practice floor mat (Clinic and Veterinary Practice)
A 1.4 m entrance floor mat: a ribbed rubber field on a bevelled edge surround with a coloured border.