Free models · Game-ready GLB
Interior
Every modern model below is a self-contained .glb under 25 MB that drops into three.js, Blender, Godot, Unity and Unreal, free to use and modify in commercial projects without attribution.
Load one straight from its CDN URL with a plain GLTFLoader, or take a whole themed set from the packs.
5,621 free GLB models
Sofa Two Seat (Bedroom and Living Room Furniture)
Modern two-seat sofa with square arms, back frame, seamed seat pads and leaning back cushions.
AnimatedUnderbed Storage Box (Bedroom and Living Room Furniture)
Low storage box on block feet with a hinged lid and a recessed front pull.
Headboard Upholstered Queen (Bedroom and Living Room Furniture)
Standalone upholstered queen headboard with a contrast seam and rear legs.
Daybed Lounger (Bedroom and Living Room Furniture)
Timber daybed with a tilted backrest, seat cushion, two bolsters and a pillow.
Bunk Bed Twin (Bedroom and Living Room Furniture)
Twin bunk bed with two 90 cm bunks, guard rails, ladder and two mattresses.
Single Bed Timber (Bedroom and Living Room Furniture)
Oak 90 cm single bed with a slatted headboard, slatted base, mattress and pillow.
Double Bed Upholstered (Bedroom and Living Room Furniture)
Upholstered 160 cm double bed with a buttonless seamed headboard, mattress and two pillows.
Flat Ceiling 4 m (Bedroom and Living Room Furniture)
4 m square ceiling slab on two cross beams with a raised centre panel.
AnimatedFlat Wall Door 4 m (Bedroom and Living Room Furniture)
4 m wall with a 900 mm hinged oak door leaf, architrave and skirting.
Flat Wall Window 4 m (Bedroom and Living Room Furniture)
4 m wall with a 1.6 m glazed window, oak sill and skirting.
Flat Wall 4 m (Bedroom and Living Room Furniture)
4 m plain interior wall, 2.6 m high and 120 mm thick, with skirting and a picture rail.
Flat Floor 4 m (Bedroom and Living Room Furniture)
4 m square oak floor tray with a walnut inlay border, top face at 60 mm.
Visitor Tasting Counter (Distillery and Bonded Warehouse)
Visitor tasting counter 2.8 x 1.1 m and 1.8 m to the back shelf: a cask staved oak front with iron bands, a plank top, six nosing glasses on a tray, a water jug, two unlabelled bottles and seven more glasses upended on the shelf behind. Nothing carries a label.
Warehouse Floor Slab (Distillery and Bonded Warehouse)
Four metre floor tile 0.14 m thick: a concrete bed with sixteen laid stone flags on it and open joints between them. Tiles edge to edge on a four metre grid with the yard module, so a warehouse or stillhouse floor has no seams.
Pallet of Casks (Distillery and Bonded Warehouse)
Four barrels stood on end on a 1.5 x 1.2 m timber pallet and strapped in two bands, 1.05 m tall overall. Every head is blank. Ready for a lorry bed, a loading bay or a corner of a filling store.
AnimatedCharring Drum (Distillery and Bonded Warehouse)
Charring drum 2.2 m between frames and 1.7 m tall: a perforated iron drum 1.5 m long turning on a shaft over a hearth pan and fire bars, in a braced frame with a crank handle at one end. The fire is not modelled; the drum turns on its axis.
Hoop Stack (Distillery and Bonded Warehouse)
Stack of iron cask hoops on a timber pallet, 1.5 x 0.9 m and 0.65 m tall: seven wide chime hoops in one pile, six smaller ones in another and three more leaning against them. Cooperage stock; the hoops are one static body each.
Cooperage Anvil and Croze (Distillery and Bonded Warehouse)
Cooper’s working set on a 1.3 x 0.9 m footprint: a hooped oak block carrying a stake anvil with its horn, a croze with its fence and cutter laid on a low bench beside it, and a hand adze leaning against the block. Static tools; nothing here moves.
AnimatedStencil Bench (Distillery and Bonded Warehouse)
Stencil bench 1.6 x 0.75 m and 0.88 m to the top: an oak bench with a back board, four blank stencil plates hung on it, a stack of blanks and an ink tray on the top, two brushes and a drawer of spare plates below. Every plate is cut with nothing at all.
AnimatedCask Hoist Rail with Chain Block (Distillery and Bonded Warehouse)
Overhead hoist 4.2 m between posts and 3.7 m to the top of the rail: two braced posts on pads, a rolled beam and a chain block on its trolley whose body and hook lift on the rail. The hand chain and the fall are one static body, because chain links need a joint each.
Bung Mallet and Driver (Distillery and Bonded Warehouse)
Cooper’s bung mallet and hoop driver on a 1.1 x 0.8 m footprint: a turned oak mallet head on its handle lying on the floor, an iron driver beside it and three spare bungs. Small floor dressing for a filling store or a cooperage.
AnimatedRacking Bench (Distillery and Bonded Warehouse)
Filling store racking bench 2.0 x 0.85 m and 0.92 m to the top: an oak bench on a braced frame, a let in drip tray, a standard carrying the filling head and its cock, a drawer of fittings on runners and loose bungs on the top.
Dunnage Cask Stack (Distillery and Bonded Warehouse)
Three hogsheads stacked two over one on timber runners, 2.4 x 1.0 m and 1.7 m tall, with chocks between the tiers and a wedge at each end. Every head is blank. The way a dunnage floor is filled where there is no rack.
Cask Rack, Three Tier (Distillery and Bonded Warehouse)
Timber dunnage rack 2.4 m long and 3.1 m tall: two braced end frames on stone pads, a head beam and three tiers of paired runners with oak chocks, each tier taking two casks. The full height a dunnage floor is racked to, and it lays end to end with the two tier rack.