About
A 1 m under-bar double sink: two real pressed bowls in a stainless deck, a ribbed drainer, a rear splashback with a rolled top, an undershelf and a swan-neck mixer with lever handles. Overall 1.01 by 1.21 by 0.56 m (X by Y by Z). Metre units, +Y up, the side a person uses toward +Z, resting on y=0. Under-bar equipment on the 0.86 m undercounter height and 0.55 m depth used across this pack. Static geometry; no rig, collision or navigation data.
Use with an AI agent
Copy this prompt into your AI chat, then describe what you want to build with the asset.
Use the “Under-bar double sink (Bar, Pub and Brewery Taproom)” asset in my project. Model: https://cdn.3dassets.dev/assets/11073/v2/model.glb Asset page: https://3dassets.dev/assets/bar-pub-and-brewery-taproom-underbar-sink-pair-d4adcc68 Description: A 1 m under-bar double sink: two real pressed bowls in a stainless deck, a ribbed drainer, a rear splashback with a rolled top, an undershelf and a swan-neck mixer with lever handles. - Dimensions (X × Y × Z): 1.012 × 1.213 × 0.556 metres - Triangles: 2.4k - Animations: none - Licence: CC0 1.0 Universal (https://creativecommons.org/publicdomain/zero/1.0/) - Loading: Three.js GLTFLoader; no additional decoders required.
Also available as JSON, Markdown, or via the MCP server.
Import manually
Choose your framework, then copy the code into your project to load the asset.
import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'
const loader = new GLTFLoader()
loader.load('https://cdn.3dassets.dev/assets/11073/v2/model.glb', (gltf) => {
scene.add(gltf.scene)
})Under-bar double sink (Bar, Pub and Brewery Taproom)
A 1 m under-bar double sink: two real pressed bowls in a stainless deck, a ribbed drainer, a rear splashback with a rolled top, an undershelf and a swan-neck mixer with lever handles.
More in Props & Furniture
Slatted Fish Crate (Quiet Lake Fishing)
Open wooden market crate with corner straps and separated planks.
Thirty Egg Tray (Fresh Produce and Groceries)
Empty moulded pulp egg tray: a thirty cup grid of five by six drawn as a single sheet, so every cup is a real hollow with a cone standing between each four, ringed by a raised wall and a flat flange.
Fishing Spot Sign (Quiet Lake Fishing)
Teal timber sign with a raised cream fish pictogram and coral tail.
Open Tackle Box (Quiet Lake Fishing)
Open teal tackle case with compartment dividers, colored floats and upright lid.
Life Ring (Quiet Lake Fishing)
Cream rescue ring with four coral bands and a perimeter rope.
Fishing Float Set (Quiet Lake Fishing)
Three differently shaped fishing floats on a compact wooden storage tray.
Bait Bucket (Quiet Lake Fishing)
Open tapered bucket with a thick rim, visible interior and arched handle.
Canvas Fishing Chair (Quiet Lake Fishing)
Cream canvas folding chair with crossed legs, teal back and wooden armrests.
Catch Cooler (Quiet Lake Fishing)
Cream-lidded teal cooler with coral latches and carry handles.
Dock Railing (Quiet Lake Fishing)
Removable 2.4 m rope railing; place at deck height along a dock edge.
Mooring Bollard (Quiet Lake Fishing)
Cast mooring post with a broad foot and crossbar.
Dock Ladder (Quiet Lake Fishing)
Four-rung metal swimming ladder with curved handrails, 1.35 m tall.
Similar assets
Inset double bowl sink 960 (Home Appliances and Utility Room)
A 960 mm inset double bowl sink: a pressed deck with two real apertures and a rolled edge, a full bowl and a half bowl each with a waste boss, a ribbed drainer, a single lever mixer tap and a linked bottle trap.
Inset 1.5 bowl sink with drainer (Home Appliances and Utility Room)
A 1.0 m inset one and a half bowl sink: main bowl, shallow rinse bowl, seven pressed drainer grooves, a rolled deck edge, a mixer tap and a linked waste run.
Double scrub sink (Primary Care Clinic and Veterinary Practice)
A 1.1 m double scrub sink: a tubular stainless frame, a pressed deck with two real bowl apertures and recessed bowls, strainer wastes and bottle traps, elbow-lever mixers, a splashback with three scrub dispensers and a knee kick rail.
Double bowl wash sink (Fast Food Counter and Drive-Thru)
A 1.4 m double bowl wash sink on tubular legs with a ribbed drainer, a full-width splashback and a swan neck mixer tap with lever handles.
Double pot wash sink (Restaurant Kitchen and Dining Room)
A 1.8 m double-bowl pot wash sink: two deep pressed bowls with waste strainers, a ribbed drainer, a pre-rinse spray on a spring arm and a full undershelf.
Bakery prep sink (Cafe, Bakery and Coffee Bar)
A 1.3 m bakery prep sink: two deep pressed bowls with rolled rims and strainer wastes in a stainless top on a tubular leg frame, with a ribbed drainer, a rear upstand and a swan neck mixer with lever handles.
Bar dump sink (Bar, Pub and Brewery Taproom)
A 340 mm dump sink on a leg frame: a deep pressed bowl with a perforated strainer basket and a sprung spray rinser on a coiled hose.
Bar counter module 1200 (Bar, Pub and Brewery Taproom)
A 1.2 m pub bar counter module: recessed plinth, fielded timber front panelling under a moulded rail, a postformed bar top with a bullnose nosing and brass edge strip, a brass foot rail on stanchions and a stainless working deck with an upstand inside the bar.
Pour over brew bar (Cafe, Bakery and Coffee Bar)
A 0.72 m pour over brew bar: a stainless frame carrying a timber deck built as rails around three real apertures, three cone drippers seated in them over glass carafes, a gooseneck kettle on a heater plate and a bench scale.
Mop sink with splashback (Laundrette and Cleaning Services)
A low mop sink: a deep stainless bowl with a bucket grating on a tiled splashback panel, a plinth with a kick, a wall bib tap with a hose, a bucket rail across the front and a hose hook rail.
AnimatedUnder-bar ice well (Bar, Pub and Brewery Taproom)
A 560 mm insulated ice well on a stainless leg frame: a deck plate with a real aperture, a deep pressed pan with bottle dividers standing in it, an undershelf and a hinged insulated lid with a lift handle.
Working bar with back bar and dispense (Bar, Pub and Brewery Taproom)
Composed example for Bar, Pub and Brewery Taproom.