# Machine shop and factory hall

Walk the floor of a working machine shop built from the Machine Shop and Factory Hall pack: an engine lathe, mill, drill, grinders, presses and a CNC centre at their stations under a gantry crane, with the mezzanine stores, racking, forklift and welding bay around them.

- **URL:** https://3dassets.dev/demos/machine-shop-and-factory-hall
- **Pack:** [Machine Shop and Factory Hall](https://3dassets.dev/packs/machine-shop-and-factory-hall) (68 models)
- **Placed:** 201 instances of 48 models
- **Walkable area:** 20 x 20 m
- **Spawn:** (0.60, 0, 8.60), facing 180 degrees
- **Pack starter scene GLB:** https://cdn.3dassets.dev/assets/27790/v1/model.glb
- **Units:** metres, +Y up; rotation is yaw in degrees about +Y

## About

An 18 by 18 metre steel hall from 48 of the pack's 68 models, on the pack's own 6 m concrete floor tiles inside its cladding bays, columns and roof trusses, under the hall preset's cool light with the high bay fittings.

You start at the open front of the hall facing the machine rows. The engine lathe and the bench lathe are in front of you, then the vertical mill, pillar drill, surface grinder, bandsaw, hydraulic press and press brake in rows, each with a tool cabinet, coolant tank, chip tray and swarf pile at its station and yellow bollards guarding the aisles. The CNC machining centre stands along the right wall with the compressor. The gantry crane bridge spans the hall on its runway rails.

At the back the two mezzanine bays with their stair sit over the racking, stillages, pallets of cartons and bar stock, parts bin shelving and trolleys; the welding bay is in the right rear corner with its table, screen, MIG welder, powder coating oven and parts washer. The roller shutter and personnel door are on the left wall with the forklift, the cantilever bar rack, oil drums on their tipping stands and the scrap skip by the entrance.

What moves: chucks, spindles, wheels and the bandsaw blade wheel spin, the lathe carriage and the mill table travel, the press rams stroke, the CNC door slides, the roller shutter rolls up, the personnel door, oven door, parts washer lid and the top tool cabinet drawer open and close, the crane trolley traverses and the forklift rolls its wheels and lifts its mast. What does not: belts, hoses, cables and the crane girder are static, and there are no figures.

## Points of interest

- **The engine lathe** at (-2.20, 0, 7.60): A 2.4 m bed engine lathe: the chuck spins, the carriage travels the bed and the tailstock handwheel turns as you approach. Filleted sage enamel castings, spoked handwheels and a control panel with its emergency stop. ([Engine lathe with 2.4 m bed (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-85a43bb6))
- **The CNC centre** at (5.20, 0, 1.40): The machining centre slides its front door open on approach, with the control pendant beside it and a tool cabinet, coolant tank and chip tray at the station like every machine in the hall. ([CNC machining centre with sliding door (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-c358e0db))
- **The gantry crane** at (0, 0, -1.50): The crane bridge spans the hall on runway rails at 4 m and traverses its trolley as you pass beneath. The girder itself is static: the builder only parents single-part nodes. ([Overhead gantry crane bridge with trolley (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-4ea99843))
- **The mezzanine and stores** at (-3, 0, -5.60): Two mezzanine bays with handrails over the racking and stillages, reached by the 3 m stair. Pallets of cartons and bar stock, parts bins and trolleys fill the stores below. ([Mezzanine floor bay with handrail, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-0fb233b0))
- **The welding bay** at (5.60, 0, -5.80): The welding table with its clamps behind the red screen, the MIG welder on its bottle cart, the powder coating oven with a hinged door and the parts washer with a lift lid in the far corner. ([Welding table with clamps (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-e5cdc0ae))
- **The roller door** at (-6.60, 0, 0.60): The roller shutter rolls up on approach beside the personnel door, with the forklift carrying a pallet, the bar stock rack and the scrap skip by the entrance. The high bay fittings light the hall from the trusses. ([Hall roller shutter door bay (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-6b1e268f))

## Models used

| Model | Size | Bounds (m) | GLB |
| --- | --- | --- | --- |
| [Concrete floor tile, plain 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-e8ccf970) | 50 KB | 6 x 0.13 x 6 | https://cdn.3dassets.dev/assets/27756/v1/model.glb |
| [Concrete floor tile with walkway lines, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-912b65d7) | 51 KB | 6 x 0.13 x 6 | https://cdn.3dassets.dev/assets/27755/v1/model.glb |
| [Hall wall bay with high windows (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-6da77042) | 62 KB | 5.84 x 6 x 0.22 | https://cdn.3dassets.dev/assets/27744/v1/model.glb |
| [Hall wall cladding bay, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-62215c40) | 55 KB | 5.84 x 6 x 0.22 | https://cdn.3dassets.dev/assets/27745/v1/model.glb |
| [Hall personnel door bay (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-41eda956) | 63 KB | 5.84 x 6 x 0.32 | https://cdn.3dassets.dev/assets/27747/v1/model.glb |
| [Hall roller shutter door bay (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-6b1e268f) | 61 KB | 5.84 x 6 x 0.49 | https://cdn.3dassets.dev/assets/27746/v1/model.glb |
| [Steel hall corner column, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-194ff0ea) | 10 KB | 0.44 x 6.01 x 0.44 | https://cdn.3dassets.dev/assets/27743/v1/model.glb |
| [Steel hall column, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-350a522e) | 6 KB | 0.36 x 6 x 0.36 | https://cdn.3dassets.dev/assets/27741/v1/model.glb |
| [Hall roof truss bay, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-8d85e1d0) | 11 KB | 6.05 x 0.78 x 0.27 | https://cdn.3dassets.dev/assets/27748/v1/model.glb |
| [Hall roof cladding bay, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-21e1b640) | 7 KB | 6 x 0.17 x 6 | https://cdn.3dassets.dev/assets/27749/v1/model.glb |
| [Hall ridge skylight bay, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-4f1764ac) | 11 KB | 6 x 0.45 x 6.00 | https://cdn.3dassets.dev/assets/27750/v1/model.glb |
| [Mezzanine floor bay with handrail, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-0fb233b0) | 13 KB | 6 x 4.01 x 3.04 | https://cdn.3dassets.dev/assets/27751/v1/model.glb |
| [Mezzanine access stair, 3 m rise (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-fb7b5ee9) | 21 KB | 1.38 x 4.04 x 3.74 | https://cdn.3dassets.dev/assets/27752/v1/model.glb |
| [Gantry crane runway rail, 6 m (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-07bdd4e4) | 8 KB | 6.12 x 0.53 x 0.20 | https://cdn.3dassets.dev/assets/27753/v1/model.glb |
| [Overhead gantry crane bridge with trolley (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-4ea99843) | 49 KB | 17.76 x 4.48 x 2.99 | https://cdn.3dassets.dev/assets/27754/v1/model.glb |
| [High bay light fitting (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-0dd4b199) | 15 KB | 0.60 x 1.25 x 0.58 | https://cdn.3dassets.dev/assets/27787/v1/model.glb |
| [Engine lathe with 2.4 m bed (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-85a43bb6) | 686 KB | 2.51 x 2.00 x 1.04 | https://cdn.3dassets.dev/assets/27724/v1/model.glb |
| [Bench lathe on a cabinet stand (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-c5e95c13) | 448 KB | 1.31 x 1.49 x 0.73 | https://cdn.3dassets.dev/assets/27723/v1/model.glb |
| [Steel chip tray (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-c82804a4) | 6 KB | 0.80 x 0.16 x 0.50 | https://cdn.3dassets.dev/assets/27780/v1/model.glb |
| [Pile of steel swarf (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-c77bc528) | 7 KB | 0.66 x 0.34 x 0.61 | https://cdn.3dassets.dev/assets/27778/v1/model.glb |
| [Open scrap skip (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-b0480ddd) | 14 KB | 2.54 x 1.18 x 1.33 | https://cdn.3dassets.dev/assets/27772/v1/model.glb |
| [Mobile tool cabinet with drawers (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-952ce527) | 26 KB | 0.97 x 1.02 x 0.59 | https://cdn.3dassets.dev/assets/27762/v1/model.glb |
| [Coolant mixing tank with pump (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-72949e51) | 28 KB | 0.70 x 1.43 x 0.77 | https://cdn.3dassets.dev/assets/27777/v1/model.glb |
| [Yellow safety bollard (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-eb9d099e) | 10 KB | 0.24 x 0.90 x 0.24 | https://cdn.3dassets.dev/assets/27784/v1/model.glb |
| [Vertical milling machine (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-4ad41824) | 462 KB | 1.39 x 2.59 x 1.39 | https://cdn.3dassets.dev/assets/27725/v1/model.glb |
| [Pillar drill press, floor standing (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-a352dcc6) | 387 KB | 0.85 x 2.16 x 0.68 | https://cdn.3dassets.dev/assets/27729/v1/model.glb |
| [Surface grinder with magnetic chuck (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-c780fa4b) | 426 KB | 1.31 x 2.00 x 1.21 | https://cdn.3dassets.dev/assets/27727/v1/model.glb |
| [Two shelf workshop trolley (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-9dcb097f) | 23 KB | 0.90 x 1.14 x 0.57 | https://cdn.3dassets.dev/assets/27769/v1/model.glb |
| [Empty timber pallet (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-df24f11e) | 23 KB | 1.20 x 0.13 x 1.00 | https://cdn.3dassets.dev/assets/27773/v1/model.glb |
| [Press brake for sheet metal (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-b84f8458) | 360 KB | 2.34 x 2.10 x 1.38 | https://cdn.3dassets.dev/assets/27731/v1/model.glb |
| [Hydraulic workshop press, H frame (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-154266a1) | 357 KB | 1.54 x 2.27 x 0.82 | https://cdn.3dassets.dev/assets/27730/v1/model.glb |
| [CNC machining centre with sliding door (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-c358e0db) | 351 KB | 3.36 x 2.96 x 2.13 | https://cdn.3dassets.dev/assets/27732/v1/model.glb |
| [Parts washing cabinet with lift lid (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-e36d00a7) | 377 KB | 0.98 x 1.32 x 0.81 | https://cdn.3dassets.dev/assets/27742/v1/model.glb |
| [Piston air compressor with receiver tank (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-081490c8) | 337 KB | 1.98 x 1.34 x 0.60 | https://cdn.3dassets.dev/assets/27740/v1/model.glb |
| [Powder coating oven with hinged door (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-94df902a) | 342 KB | 1.70 x 2.60 x 1.62 | https://cdn.3dassets.dev/assets/27739/v1/model.glb |
| [Steel stillage cage (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-44285edb) | 19 KB | 1.22 x 1.00 x 0.82 | https://cdn.3dassets.dev/assets/27774/v1/model.glb |
| [Workbench with engineer's vice (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-59baca96) | 33 KB | 2.04 x 1.12 x 0.90 | https://cdn.3dassets.dev/assets/27763/v1/model.glb |
| [Parts bin shelving with plastic bins (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-948f4b42) | 29 KB | 1.28 x 2.05 x 0.55 | https://cdn.3dassets.dev/assets/27766/v1/model.glb |
| [Horizontal metal cutting bandsaw (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-c5ef70ac) | 383 KB | 1.62 x 1.60 x 0.95 | https://cdn.3dassets.dev/assets/27726/v1/model.glb |
| [Cantilever bar stock rack (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-4fd8941e) | 30 KB | 2.80 x 2.53 x 0.87 | https://cdn.3dassets.dev/assets/27759/v1/model.glb |
| [Pallet of steel bar stock (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-e31c5df7) | 34 KB | 1.20 x 0.32 x 1.00 | https://cdn.3dassets.dev/assets/27758/v1/model.glb |
| [Oil drum on a tipping stand with a tap (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-fff9ca65) | 21 KB | 1.15 x 1.22 x 0.72 | https://cdn.3dassets.dev/assets/27770/v1/model.glb |
| [Welding table with clamps (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-e5cdc0ae) | 332 KB | 1.70 x 1.14 x 0.99 | https://cdn.3dassets.dev/assets/27736/v1/model.glb |
| [MIG welder on a bottle cart (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-cb525721) | 348 KB | 0.75 x 1.34 x 0.84 | https://cdn.3dassets.dev/assets/27737/v1/model.glb |
| [Welding screen on castors (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-40c4b763) | 355 KB | 1.90 x 1.91 x 0.44 | https://cdn.3dassets.dev/assets/27738/v1/model.glb |
| [Pallet racking bay, two levels (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-ebf92b35) | 36 KB | 2.90 x 3.72 x 1.00 | https://cdn.3dassets.dev/assets/27757/v1/model.glb |
| [Pallet of stacked cartons (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-98757411) | 31 KB | 1.20 x 1.03 x 1.00 | https://cdn.3dassets.dev/assets/27760/v1/model.glb |
| [Counterbalance forklift truck (Machine Shop and Factory Hall)](https://3dassets.dev/assets/machine-shop-and-factory-hall-machine-shop-and-factory-78651fdd) | 147 KB | 1.34 x 2.54 x 3.26 | https://cdn.3dassets.dev/assets/27768/v1/model.glb |

## Layout

| # | Model | Position (x, y, z) | Yaw |
| --- | --- | --- | --- |
| 1 | Concrete floor tile, plain 6 m (Machine Shop and Factory Hall) | -6, -0.12, -6 | 0 |
| 2 | Concrete floor tile with walkway lines, 6 m (Machine Shop and Factory Hall) | -6, -0.12, 0 | 0 |
| 3 | Concrete floor tile, plain 6 m (Machine Shop and Factory Hall) | -6, -0.12, 6 | 0 |
| 4 | Concrete floor tile, plain 6 m (Machine Shop and Factory Hall) | 0, -0.12, -6 | 0 |
| 5 | Concrete floor tile with walkway lines, 6 m (Machine Shop and Factory Hall) | 0, -0.12, 0 | 0 |
| 6 | Concrete floor tile, plain 6 m (Machine Shop and Factory Hall) | 0, -0.12, 6 | 0 |
| 7 | Concrete floor tile, plain 6 m (Machine Shop and Factory Hall) | 6, -0.12, -6 | 0 |
| 8 | Concrete floor tile with walkway lines, 6 m (Machine Shop and Factory Hall) | 6, -0.12, 0 | 0 |
| 9 | Concrete floor tile, plain 6 m (Machine Shop and Factory Hall) | 6, -0.12, 6 | 0 |
| 10 | Hall wall bay with high windows (Machine Shop and Factory Hall) | -6, 0, -9 | 0 |
| 11 | Hall wall cladding bay, 6 m (Machine Shop and Factory Hall) | 0, 0, -9 | 0 |
| 12 | Hall personnel door bay (Machine Shop and Factory Hall) | 6, 0, -9 | 0 |
| 13 | Hall wall bay with high windows (Machine Shop and Factory Hall) | -9, 0, -6 | 90 |
| 14 | Hall roller shutter door bay (Machine Shop and Factory Hall) | -9, 0, 0 | 90 |
| 15 | Hall wall cladding bay, 6 m (Machine Shop and Factory Hall) | -9, 0, 6 | 90 |
| 16 | Hall wall cladding bay, 6 m (Machine Shop and Factory Hall) | 9, 0, -6 | -90 |
| 17 | Hall wall bay with high windows (Machine Shop and Factory Hall) | 9, 0, 0 | -90 |
| 18 | Hall wall cladding bay, 6 m (Machine Shop and Factory Hall) | 9, 0, 6 | -90 |
| 19 | Steel hall corner column, 6 m (Machine Shop and Factory Hall) | -9, 0, -9 | 0 |
| 20 | Steel hall corner column, 6 m (Machine Shop and Factory Hall) | 9, 0, -9 | 0 |
| 21 | Steel hall corner column, 6 m (Machine Shop and Factory Hall) | -9, 0, 9 | 0 |
| 22 | Steel hall corner column, 6 m (Machine Shop and Factory Hall) | 9, 0, 9 | 0 |
| 23 | Steel hall column, 6 m (Machine Shop and Factory Hall) | -3, 0, -9 | 0 |
| 24 | Steel hall column, 6 m (Machine Shop and Factory Hall) | 3, 0, -9 | 0 |
| 25 | Steel hall column, 6 m (Machine Shop and Factory Hall) | -9, 0, -3 | 0 |
| 26 | Steel hall column, 6 m (Machine Shop and Factory Hall) | -9, 0, 3 | 0 |
| 27 | Steel hall column, 6 m (Machine Shop and Factory Hall) | 9, 0, -3 | 0 |
| 28 | Steel hall column, 6 m (Machine Shop and Factory Hall) | 9, 0, 3 | 0 |
| 29 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | -6, 6, -9 | 0 |
| 30 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | 0, 6, -9 | 0 |
| 31 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | 6, 6, -9 | 0 |
| 32 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | -6, 6, -3 | 0 |
| 33 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | 0, 6, -3 | 0 |
| 34 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | 6, 6, -3 | 0 |
| 35 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | -6, 6, 3 | 0 |
| 36 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | 0, 6, 3 | 0 |
| 37 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | 6, 6, 3 | 0 |
| 38 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | -6, 6, 9 | 0 |
| 39 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | 0, 6, 9 | 0 |
| 40 | Hall roof truss bay, 6 m (Machine Shop and Factory Hall) | 6, 6, 9 | 0 |
| 41 | Hall roof cladding bay, 6 m (Machine Shop and Factory Hall) | -6, 6.70, -6 | 0 |
| 42 | Hall ridge skylight bay, 6 m (Machine Shop and Factory Hall) | 0, 6.70, -6 | 0 |
| 43 | Hall roof cladding bay, 6 m (Machine Shop and Factory Hall) | 6, 6.70, -6 | 0 |
| 44 | Mezzanine floor bay with handrail, 6 m (Machine Shop and Factory Hall) | -6, 0, -7.35 | 0 |
| 45 | Mezzanine floor bay with handrail, 6 m (Machine Shop and Factory Hall) | 0, 0, -7.35 | 0 |
| 46 | Mezzanine access stair, 3 m rise (Machine Shop and Factory Hall) | 2, 0, -4.05 | 0 |
| 47 | Gantry crane runway rail, 6 m (Machine Shop and Factory Hall) | -8.60, 4, -6 | 90 |
| 48 | Gantry crane runway rail, 6 m (Machine Shop and Factory Hall) | -8.60, 4, 0 | 90 |
| 49 | Gantry crane runway rail, 6 m (Machine Shop and Factory Hall) | -8.60, 4, 6 | 90 |
| 50 | Gantry crane runway rail, 6 m (Machine Shop and Factory Hall) | 8.60, 4, -6 | -90 |
| 51 | Gantry crane runway rail, 6 m (Machine Shop and Factory Hall) | 8.60, 4, 0 | -90 |
| 52 | Gantry crane runway rail, 6 m (Machine Shop and Factory Hall) | 8.60, 4, 6 | -90 |
| 53 | Overhead gantry crane bridge with trolley (Machine Shop and Factory Hall) | 0, 2.02, -1.50 | 0 |
| 54 | High bay light fitting (Machine Shop and Factory Hall) | -4.50, 4.80, -6.50 | 0 |
| 55 | High bay light fitting (Machine Shop and Factory Hall) | -4.50, 4.80, -1.50 | 0 |
| 56 | High bay light fitting (Machine Shop and Factory Hall) | -4.50, 4.80, 3.20 | 0 |
| 57 | High bay light fitting (Machine Shop and Factory Hall) | 0, 4.80, -6.50 | 0 |
| 58 | High bay light fitting (Machine Shop and Factory Hall) | 0, 4.80, -1.50 | 0 |
| 59 | High bay light fitting (Machine Shop and Factory Hall) | 0, 4.80, 3.20 | 0 |
| 60 | High bay light fitting (Machine Shop and Factory Hall) | 4.50, 4.80, -6.50 | 0 |
| 61 | High bay light fitting (Machine Shop and Factory Hall) | 4.50, 4.80, -1.50 | 0 |
| 62 | High bay light fitting (Machine Shop and Factory Hall) | 4.50, 4.80, 3.20 | 0 |
| 63 | Engine lathe with 2.4 m bed (Machine Shop and Factory Hall) | -2.20, 0, 5.40 | 0 |
| 64 | Bench lathe on a cabinet stand (Machine Shop and Factory Hall) | -6.60, 0, 5.40 | 0 |
| 65 | Steel chip tray (Machine Shop and Factory Hall) | -2.20, 0, 6.60 | 0 |
| 66 | Steel chip tray (Machine Shop and Factory Hall) | -6.60, 0, 6.50 | 0 |
| 67 | Pile of steel swarf (Machine Shop and Factory Hall) | -4.30, 0, 6.40 | 0 |
| 68 | Open scrap skip (Machine Shop and Factory Hall) | -3.40, 0, 6.90 | 0 |
| 69 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -4.40, 0, 5.40 | 0 |
| 70 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -0.30, 0, 5.40 | 0 |
| 71 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -0.30, 0.99, 5.40 | 0 |
| 72 | Coolant mixing tank with pump (Machine Shop and Factory Hall) | -7.90, 0, 6.20 | 0 |
| 73 | Yellow safety bollard (Machine Shop and Factory Hall) | -8.20, 0, 7.40 | 0 |
| 74 | Yellow safety bollard (Machine Shop and Factory Hall) | 2.80, 0, 7 | 0 |
| 75 | Vertical milling machine (Machine Shop and Factory Hall) | -5.20, 0, 2.20 | 0 |
| 76 | Pillar drill press, floor standing (Machine Shop and Factory Hall) | -2.90, 0, 2.40 | 0 |
| 77 | Surface grinder with magnetic chuck (Machine Shop and Factory Hall) | -0.70, 0, 2.20 | 0 |
| 78 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -4.10, 0, 2.40 | 0 |
| 79 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -6.60, 0, 2.40 | 0 |
| 80 | Steel chip tray (Machine Shop and Factory Hall) | -5.20, 0, 3.30 | 0 |
| 81 | Steel chip tray (Machine Shop and Factory Hall) | -0.70, 0, 3.30 | 0 |
| 82 | Coolant mixing tank with pump (Machine Shop and Factory Hall) | -1.80, 0, 2.70 | 0 |
| 83 | Pile of steel swarf (Machine Shop and Factory Hall) | -3.90, 0, 3.40 | 0 |
| 84 | Two shelf workshop trolley (Machine Shop and Factory Hall) | 0.90, 0, 2.60 | 0 |
| 85 | Empty timber pallet (Machine Shop and Factory Hall) | 2.60, 0, 3.20 | 0 |
| 86 | Yellow safety bollard (Machine Shop and Factory Hall) | -8.40, 0, 3.40 | 0 |
| 87 | Press brake for sheet metal (Machine Shop and Factory Hall) | 4.20, 0, 3.60 | 0 |
| 88 | Hydraulic workshop press, H frame (Machine Shop and Factory Hall) | 6.80, 0, 4.80 | 0 |
| 89 | CNC machining centre with sliding door (Machine Shop and Factory Hall) | 7, 0, 1.40 | -90 |
| 90 | Parts washing cabinet with lift lid (Machine Shop and Factory Hall) | 4.60, 0, 6.40 | 0 |
| 91 | Piston air compressor with receiver tank (Machine Shop and Factory Hall) | 8.10, 0, 4.40 | -90 |
| 92 | Powder coating oven with hinged door (Machine Shop and Factory Hall) | 8, 0, 7 | -90 |
| 93 | Steel stillage cage (Machine Shop and Factory Hall) | 3, 0, 6.40 | 0 |
| 94 | Empty timber pallet (Machine Shop and Factory Hall) | 5.60, 0, 2.20 | 0 |
| 95 | Two shelf workshop trolley (Machine Shop and Factory Hall) | 6.40, 0, 2.60 | -90 |
| 96 | Steel chip tray (Machine Shop and Factory Hall) | 4.20, 0, 4.60 | 0 |
| 97 | Pile of steel swarf (Machine Shop and Factory Hall) | 6.80, 0, 5.90 | 0 |
| 98 | Yellow safety bollard (Machine Shop and Factory Hall) | 5.60, 0, 0.60 | 0 |
| 99 | Yellow safety bollard (Machine Shop and Factory Hall) | 8.40, 0, 2.40 | 0 |
| 100 | Workbench with engineer's vice (Machine Shop and Factory Hall) | 0.40, 0, -2.60 | 0 |
| 101 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | 0.75, 0.93, -2.75 | 0 |
| 102 | Workbench with engineer's vice (Machine Shop and Factory Hall) | -3.70, 0, -2.60 | 0 |
| 103 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -1.60, 0, -2.60 | 0 |
| 104 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -5.50, 0, -2.60 | 0 |
| 105 | Parts bin shelving with plastic bins (Machine Shop and Factory Hall) | -5.50, 0, -3.60 | 0 |
| 106 | Pile of steel swarf (Machine Shop and Factory Hall) | 2.40, 0, -1.70 | 0 |
| 107 | Steel chip tray (Machine Shop and Factory Hall) | 3.80, 0, -1.80 | 0 |
| 108 | Two shelf workshop trolley (Machine Shop and Factory Hall) | 1.60, 0, -1.60 | 90 |
| 109 | Yellow safety bollard (Machine Shop and Factory Hall) | -2.50, 0, -1.70 | 0 |
| 110 | Horizontal metal cutting bandsaw (Machine Shop and Factory Hall) | -7.40, 0, -3.60 | 90 |
| 111 | Cantilever bar stock rack (Machine Shop and Factory Hall) | -8.20, 0, -5.60 | 90 |
| 112 | Pallet of steel bar stock (Machine Shop and Factory Hall) | -7, 0, 0.20 | 0 |
| 113 | Pallet of steel bar stock (Machine Shop and Factory Hall) | -7, 0, -1.20 | 0 |
| 114 | Steel stillage cage (Machine Shop and Factory Hall) | -7.30, 0, 1.60 | 0 |
| 115 | Steel stillage cage (Machine Shop and Factory Hall) | -5.80, 0, 1.60 | 0 |
| 116 | Empty timber pallet (Machine Shop and Factory Hall) | -5.80, 0, 0.20 | 0 |
| 117 | Oil drum on a tipping stand with a tap (Machine Shop and Factory Hall) | -8.20, 0, -0.60 | 90 |
| 118 | Yellow safety bollard (Machine Shop and Factory Hall) | -6.20, 0, 2.40 | 0 |
| 119 | Steel chip tray (Machine Shop and Factory Hall) | -7.40, 0, -2.30 | 0 |
| 120 | Pile of steel swarf (Machine Shop and Factory Hall) | -6.40, 0, -4.60 | 0 |
| 121 | Welding table with clamps (Machine Shop and Factory Hall) | 6.40, 0, -7.40 | 180 |
| 122 | MIG welder on a bottle cart (Machine Shop and Factory Hall) | 8.20, 0, -7.60 | -90 |
| 123 | Welding screen on castors (Machine Shop and Factory Hall) | 4.40, 0, -6.90 | 90 |
| 124 | Open scrap skip (Machine Shop and Factory Hall) | 7.60, 0, -5 | -90 |
| 125 | Open scrap skip (Machine Shop and Factory Hall) | 5, 0, -8.40 | 0 |
| 126 | Steel stillage cage (Machine Shop and Factory Hall) | 6.20, 0, -5.60 | 0 |
| 127 | Yellow safety bollard (Machine Shop and Factory Hall) | 4.20, 0, -3.40 | 0 |
| 128 | Pallet racking bay, two levels (Machine Shop and Factory Hall) | 8.10, 0, -3.60 | -90 |
| 129 | Pallet racking bay, two levels (Machine Shop and Factory Hall) | 8.10, 0, -0.60 | -90 |
| 130 | Pallet of steel bar stock (Machine Shop and Factory Hall) | 8.10, 1.63, -3.60 | -90 |
| 131 | Pallet of steel bar stock (Machine Shop and Factory Hall) | 8.10, 3.13, -3.60 | -90 |
| 132 | Pallet of stacked cartons (Machine Shop and Factory Hall) | 8.10, 1.63, -0.60 | -90 |
| 133 | Pallet of stacked cartons (Machine Shop and Factory Hall) | 8.10, 3.13, -0.60 | -90 |
| 134 | Empty timber pallet (Machine Shop and Factory Hall) | 6.80, 0, -2.20 | 0 |
| 135 | Counterbalance forklift truck (Machine Shop and Factory Hall) | 1.80, 0, -4.60 | 90 |
| 136 | Pallet of steel bar stock (Machine Shop and Factory Hall) | 3.35, 0.17, -4.60 | 90 |
| 137 | Parts bin shelving with plastic bins (Machine Shop and Factory Hall) | -1.40, 0, -7.40 | 0 |
| 138 | Parts bin shelving with plastic bins (Machine Shop and Factory Hall) | -2.80, 0, -7.40 | 0 |
| 139 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | 0.20, 0, -7.20 | 0 |
| 140 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -4.60, 0, -7.20 | 0 |
| 141 | Oil drum on a tipping stand with a tap (Machine Shop and Factory Hall) | -6, 0, -7.40 | 0 |
| 142 | Oil drum on a tipping stand with a tap (Machine Shop and Factory Hall) | -6, 0, -8.40 | 0 |
| 143 | Steel stillage cage (Machine Shop and Factory Hall) | 1.70, 0, -7.40 | 0 |
| 144 | Steel stillage cage (Machine Shop and Factory Hall) | 1.70, 0, -8.50 | 0 |
| 145 | Two shelf workshop trolley (Machine Shop and Factory Hall) | -3.70, 0, -6.50 | 90 |
| 146 | Open scrap skip (Machine Shop and Factory Hall) | 2.60, 0, -6.50 | 0 |
| 147 | Empty timber pallet (Machine Shop and Factory Hall) | -0.90, 0, -8.30 | 0 |
| 148 | Pallet of stacked cartons (Machine Shop and Factory Hall) | -5.30, 0, -8.30 | 0 |
| 149 | Coolant mixing tank with pump (Machine Shop and Factory Hall) | -7.60, 0, -8.40 | 0 |
| 150 | Open scrap skip (Machine Shop and Factory Hall) | -2.60, 0, -8.40 | 0 |
| 151 | Pallet of stacked cartons (Machine Shop and Factory Hall) | -7, 3, -7.40 | 0 |
| 152 | Pallet of stacked cartons (Machine Shop and Factory Hall) | -5.40, 3, -7.40 | 0 |
| 153 | Pallet of stacked cartons (Machine Shop and Factory Hall) | -3.80, 3, -7.40 | 0 |
| 154 | Pallet of stacked cartons (Machine Shop and Factory Hall) | 1, 3, -7.40 | 0 |
| 155 | Pallet of stacked cartons (Machine Shop and Factory Hall) | -7, 3, -6.40 | 0 |
| 156 | Empty timber pallet (Machine Shop and Factory Hall) | -2.20, 3, -7.40 | 0 |
| 157 | Steel stillage cage (Machine Shop and Factory Hall) | -0.60, 3, -7.40 | 0 |
| 158 | Parts bin shelving with plastic bins (Machine Shop and Factory Hall) | 2.20, 3, -7 | 0 |
| 159 | Two shelf workshop trolley (Machine Shop and Factory Hall) | -1.40, 3, -6.40 | 90 |
| 160 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -5.40, 3, -6.40 | 0 |
| 161 | Empty timber pallet (Machine Shop and Factory Hall) | -0.60, 3, -6.40 | 0 |
| 162 | Yellow safety bollard (Machine Shop and Factory Hall) | -0.10, 0, -0.40 | 0 |
| 163 | Yellow safety bollard (Machine Shop and Factory Hall) | -0.10, 0, 1.20 | 0 |
| 164 | Yellow safety bollard (Machine Shop and Factory Hall) | -0.10, 0, 2.80 | 0 |
| 165 | Yellow safety bollard (Machine Shop and Factory Hall) | -0.10, 0, 4.40 | 0 |
| 166 | Yellow safety bollard (Machine Shop and Factory Hall) | 3.50, 0, -0.40 | 0 |
| 167 | Yellow safety bollard (Machine Shop and Factory Hall) | 3.50, 0, 1.20 | 0 |
| 168 | Yellow safety bollard (Machine Shop and Factory Hall) | 3.50, 0, 2.80 | 0 |
| 169 | Yellow safety bollard (Machine Shop and Factory Hall) | 3.50, 0, 4.40 | 0 |
| 170 | Empty timber pallet (Machine Shop and Factory Hall) | 2.60, 0, 0.60 | 0 |
| 171 | Pallet of stacked cartons (Machine Shop and Factory Hall) | 2.60, 0, -0.60 | 0 |
| 172 | Steel stillage cage (Machine Shop and Factory Hall) | 5, 0, -1.20 | 0 |
| 173 | Pile of steel swarf (Machine Shop and Factory Hall) | 0.60, 0, 0.40 | 0 |
| 174 | Steel chip tray (Machine Shop and Factory Hall) | 2, 0, 0.60 | 0 |
| 175 | Two shelf workshop trolley (Machine Shop and Factory Hall) | 4.80, 0, 0.80 | 90 |
| 176 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | 4.80, 0.85, 0.80 | 0 |
| 177 | Coolant mixing tank with pump (Machine Shop and Factory Hall) | 6.60, 0, 6.60 | 0 |
| 178 | Pallet racking bay, two levels (Machine Shop and Factory Hall) | -7.50, 0, 7.90 | 0 |
| 179 | Pallet racking bay, two levels (Machine Shop and Factory Hall) | -4.50, 0, 7.90 | 0 |
| 180 | Pallet of steel bar stock (Machine Shop and Factory Hall) | -7.50, 1.63, 7.90 | 0 |
| 181 | Pallet of stacked cartons (Machine Shop and Factory Hall) | -4.50, 1.63, 7.90 | 0 |
| 182 | Pallet of stacked cartons (Machine Shop and Factory Hall) | -7.50, 3.13, 7.90 | 0 |
| 183 | Pallet of steel bar stock (Machine Shop and Factory Hall) | -4.50, 3.13, 7.90 | 0 |
| 184 | Workbench with engineer's vice (Machine Shop and Factory Hall) | -1.40, 0, 8.20 | 180 |
| 185 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | -1.70, 0.93, 8.35 | 180 |
| 186 | Mobile tool cabinet with drawers (Machine Shop and Factory Hall) | 0.60, 0, 8.30 | 180 |
| 187 | Parts bin shelving with plastic bins (Machine Shop and Factory Hall) | 2, 0, 8.60 | 180 |
| 188 | Steel stillage cage (Machine Shop and Factory Hall) | 3.60, 0, 8.40 | 0 |
| 189 | Steel stillage cage (Machine Shop and Factory Hall) | 3.60, 0, 7.20 | 0 |
| 190 | Empty timber pallet (Machine Shop and Factory Hall) | 5, 0, 8.40 | 0 |
| 191 | Pallet of stacked cartons (Machine Shop and Factory Hall) | 5, 0, 7.20 | 0 |
| 192 | Oil drum on a tipping stand with a tap (Machine Shop and Factory Hall) | 6.40, 0, 8.40 | 180 |
| 193 | Oil drum on a tipping stand with a tap (Machine Shop and Factory Hall) | 7.40, 0, 8.40 | 180 |
| 194 | Open scrap skip (Machine Shop and Factory Hall) | 2, 0, 7.20 | 180 |
| 195 | Open scrap skip (Machine Shop and Factory Hall) | -2.80, 0, 6.90 | 90 |
| 196 | Two shelf workshop trolley (Machine Shop and Factory Hall) | 0.40, 0, 6.90 | 180 |
| 197 | Coolant mixing tank with pump (Machine Shop and Factory Hall) | -3.60, 0, 8.40 | 0 |
| 198 | Yellow safety bollard (Machine Shop and Factory Hall) | -6, 0, 4 | 0 |
| 199 | Yellow safety bollard (Machine Shop and Factory Hall) | -2, 0, 4 | 0 |
| 200 | Yellow safety bollard (Machine Shop and Factory Hall) | 2, 0, 4 | 0 |
| 201 | Yellow safety bollard (Machine Shop and Factory Hall) | 6, 0, 4 | 0 |

---
JSON (the same layout with CDN URLs): https://3dassets.dev/api/v1/demos/machine-shop-and-factory-hall · Every model loads with a plain GLTFLoader: no Draco/KTX2 loaders needed.