{"data":{"id":134,"slug":"lunar-surface-colony-and-rovers","title":"Lunar Surface Colony and Rovers","summary":"An established surface base on an airless world: habitats and tunnels on a hab-port grid, regolith extraction and power, landing infrastructure with blast protection, and a fleet of wire-mesh wheeled rovers.","description":"Surface base hardware in metre units, built for gravity rather than orbit. Habitats, tunnels, junctions, an airlock, a greenhouse, a medical module and a workshop bolt together through a documented hab-port interface whose mating plane sits 2.4 m above the regolith on a 6 m site grid, standing on legs, base rings, trestles and dust skirts. Resource work is covered by an excavator, a hopper and screening deck, oxygen and water plant, a sintering print gantry, photovoltaic rows, a solar tower, radiators, batteries and a shielded reactor. Landing is covered by a sintered pad with pad markers, two landers, blast deflectors, berms, a tank farm, a transfer arm and approach beacons. The rover fleet runs on open wire-mesh wheels with real suspension and named steering, bogie and wheel nodes, and the ground itself is supplied as tiling regolith terrain. Four composed scenes demonstrate the colony, a landing pad operation, every connector case and the resource yard. Static CC0 geometry prepared for human review.","url":"https://3dassets.dev/packs/lunar-surface-colony-and-rovers","coverUrl":"https://cdn.3dassets.dev/assets/11383/v1/poster.webp","assetCount":54,"aiGenerated":true,"aiGeneratedAssetCount":54,"aiModels":["Claude Opus 5"],"aiModelUnspecifiedCount":0,"featured":true,"licenseLabel":"CC0 1.0 Universal","totalBytes":15230144,"totalTriangles":389028,"starterScene":{"id":"11383","slug":"lunar-surface-colony-and-rovers-colony-o-c65a5af3-starter-scene","title":"Lunar Colony Overview (Lunar Surface Colony and Rovers)","summary":"Composed example for Lunar Surface Colony and Rovers.","description":"A working surface base: two tunnel junctions link a crew habitat, an inflatable dome, an observation turret, a greenhouse, a medical module, a regolith shielded habitat, an airlock and a vehicle workshop, every mate made through the hab-port interface 2.4 m above the regolith. A photovoltaic row, a tracking row, a solar tower, a radiator bank, a battery container and a shielded reactor stand clear to the west, an excavator works the south end of the site, and an open rover, a pressurised traverse rover, a suited crew member with an equipment sled and a survey station occupy the approach. Layout artifact composed from instances of this pack; static geometry only.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-colony-o-c65a5af3-starter-scene","cdnUrl":"https://cdn.3dassets.dev/assets/11383/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-colony-o-c65a5af3-starter-scene","thumbnailUrl":"https://cdn.3dassets.dev/assets/11383/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11383/v1/poster.webp","blurhash":"U88gy,t800xuM{Rjofof00Rj~qRQ-;xuRjRj","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":2615968,"triangles":71260,"vertices":154328,"meshes":192,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-20.90000009536743,-0.0002447162872303288,-26.864110327525147],"max":[24.59999990463257,9.985027040289607,27.26306244687929]},"sizeMeters":[45.5,9.985,54.127],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:58.576Z","updatedAt":"2026-09-06T15:03:59.434Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11383/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function LunarColonyOverviewLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11383/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11383/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11383/v1/model.glb\" alt=\"Lunar Colony Overview (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11383/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11383/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},"assets":[{"id":"11333","slug":"lunar-surface-colony-and-rovers-inflatable-dome-habita-1110f4c3","title":"Inflatable dome habitat (Lunar Surface Colony and Rovers)","summary":"A 7.2 m soft-goods dome habitat inflated over a rigid base ring, held by a meridian strap net and eight ground anchors, with a dust skirt, crown hatch and two side hab-ports.","description":"A 7.2 m soft-goods dome habitat inflated over a rigid base ring, held by a meridian strap net and eight ground anchors, with a dust skirt, crown hatch and two side hab-ports. Bounding size 10.64 x 6.30 x 10.64 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-stbd (hab-port), port-port (hab-port). Hab-port mating planes sit 2.4 m above the ground on the 6 m site grid. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-inflatable-dome-habita-1110f4c3","cdnUrl":"https://cdn.3dassets.dev/assets/11333/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-inflatable-dome-habita-1110f4c3","thumbnailUrl":"https://cdn.3dassets.dev/assets/11333/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11333/v1/poster.webp","blurhash":"UEB3?2xu00IUD%WBxuoe00Rj~qxu?bofM|af","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":225444,"triangles":4600,"vertices":13800,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-5.3207831382751465,-0.00010103919913762027,-5.3207831382751465],"max":[5.3207831382751465,6.299941793029573,5.3207831382751465]},"sizeMeters":[10.642,6.3,10.642],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:41.833Z","updatedAt":"2026-09-06T15:03:42.469Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11333/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function InflatableDomeHabitatLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11333/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11333/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11333/v1/model.glb\" alt=\"Inflatable dome habitat (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11333/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11333/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11334","slug":"lunar-surface-colony-and-rovers-inflatable-dome-habita-fcb4960a","title":"Inflatable dome habitat with regolith shielding (Lunar Surface Colony and Rovers)","summary":"The dome habitat buried to the shoulder under a graded regolith berm and two courses of filled bags, the shielding fit used once a base moves from a short sortie to a permanent crew rotation.","description":"The dome habitat buried to the shoulder under a graded regolith berm and two courses of filled bags, the shielding fit used once a base moves from a short sortie to a permanent crew rotation. Bounding size 12.00 x 6.30 x 11.91 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-stbd (hab-port), port-port (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-inflatable-dome-habita-fcb4960a","cdnUrl":"https://cdn.3dassets.dev/assets/11334/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-inflatable-dome-habita-fcb4960a","thumbnailUrl":"https://cdn.3dassets.dev/assets/11334/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11334/v1/poster.webp","blurhash":"UD9jo,tR00M{M{fQt6ay00Rj~qxu%Mj[Rjj[","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":346160,"triangles":7112,"vertices":21336,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-6,-0.00010103919913762027,-5.9560533463545635],"max":[6,6.299941793029573,5.9560533463545635]},"sizeMeters":[12,6.3,11.912],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:42.052Z","updatedAt":"2026-09-06T15:03:42.678Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11334/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function InflatableDomeHabitatWithRegolithShieldingLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11334/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11334/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11334/v1/model.glb\" alt=\"Inflatable dome habitat with regolith shielding (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11334/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11334/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11335","slug":"lunar-surface-colony-and-rovers-rigid-cylinder-habitat-3c790a63","title":"Rigid cylinder crew habitat on legs (Lunar Surface Colony and Rovers)","summary":"An 8 m metal-shell crew habitat carried clear of the regolith on four splayed legs with wide footpads, with three viewports, a roof radiator strip, an access ladder and axial hab-ports at both ends.","description":"An 8 m metal-shell crew habitat carried clear of the regolith on four splayed legs with wide footpads, with three viewports, a roof radiator strip, an access ladder and axial hab-ports at both ends. Bounding size 5.50 x 4.82 x 9.04 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-fwd (hab-port), port-aft (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-rigid-cylinder-habitat-3c790a63","cdnUrl":"https://cdn.3dassets.dev/assets/11335/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-rigid-cylinder-habitat-3c790a63","thumbnailUrl":"https://cdn.3dassets.dev/assets/11335/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11335/v1/poster.webp","blurhash":"UBD9#Ot700WXxaIUR%-;00M{~qt7D*%MxuD%","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":209536,"triangles":4268,"vertices":12804,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-2.750236518448439,-0.00013934020851724682,-4.519999980926514],"max":[2.750236518448439,4.819160565184103,4.519999980926514]},"sizeMeters":[5.5,4.819,9.04],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:42.539Z","updatedAt":"2026-09-06T15:03:43.461Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11335/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RigidCylinderCrewHabitatOnLegsLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11335/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11335/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11335/v1/model.glb\" alt=\"Rigid cylinder crew habitat on legs (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11335/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11335/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11336","slug":"lunar-surface-colony-and-rovers-rigid-cylinder-habitat-8581ac9c","title":"Rigid cylinder logistics module on legs (Lunar Surface Colony and Rovers)","summary":"The same legged pressure shell fitted out for stores: no viewports, external cargo racks and tie-down rails down both flanks and a dorsal equipment hatch.","description":"The same legged pressure shell fitted out for stores: no viewports, external cargo racks and tie-down rails down both flanks and a dorsal equipment hatch. Bounding size 5.50 x 4.52 x 9.04 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-fwd (hab-port), port-aft (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-rigid-cylinder-habitat-8581ac9c","cdnUrl":"https://cdn.3dassets.dev/assets/11336/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-rigid-cylinder-habitat-8581ac9c","thumbnailUrl":"https://cdn.3dassets.dev/assets/11336/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11336/v1/poster.webp","blurhash":"UAD0De%M00IT?aIUE2-p00D*~q-;0K%M?GIU","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":201508,"triangles":4114,"vertices":12342,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-2.750236518448439,0.00009046798695822034,-4.519999980926514],"max":[2.750236518448439,4.518935883822293,4.519999980926514]},"sizeMeters":[5.5,4.519,9.04],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:42.594Z","updatedAt":"2026-09-06T15:03:43.566Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11336/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RigidCylinderLogisticsModuleOnLegsLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11336/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11336/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11336/v1/model.glb\" alt=\"Rigid cylinder logistics module on legs (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11336/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11336/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11337","slug":"lunar-surface-colony-and-rovers-regolith-shielded-habi-2788d066","title":"Regolith shielded habitat (Lunar Surface Colony and Rovers)","summary":"An 8 m pressure shell buried under a 4.7 m graded regolith arch held by three retaining ribs and two horseshoe end walls, with only the end domes and their hab-ports left in the open.","description":"An 8 m pressure shell buried under a 4.7 m graded regolith arch held by three retaining ribs and two horseshoe end walls, with only the end domes and their hab-ports left in the open. Bounding size 9.44 x 4.95 x 9.07 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-fwd (hab-port), port-aft (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-regolith-shielded-habi-2788d066","cdnUrl":"https://cdn.3dassets.dev/assets/11337/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-regolith-shielded-habi-2788d066","thumbnailUrl":"https://cdn.3dassets.dev/assets/11337/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11337/v1/poster.webp","blurhash":"U7CP;XRj00-pWXRiM{%M00Rj~pWDadxu%MM{","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":192524,"triangles":3912,"vertices":11736,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-4.71999979019165,-0.0002447162872303288,-4.519999980926514],"max":[4.71999979019165,4.950021615349843,4.549866967159468]},"sizeMeters":[9.44,4.95,9.07],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:42.698Z","updatedAt":"2026-09-06T15:03:43.640Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11337/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RegolithShieldedHabitatLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11337/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11337/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11337/v1/model.glb\" alt=\"Regolith shielded habitat (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11337/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11337/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11338","slug":"lunar-surface-colony-and-rovers-connecting-tunnel-stra-fa801893","title":"Pressurised connecting tunnel, straight bay (Lunar Surface Colony and Rovers)","summary":"A 6 m straight surface tunnel bay on two ground trestles: a bellows-ribbed pressure sleeve on the 2.4 m port axis with hab-ports at both ends and handrails down both flanks.","description":"A 6 m straight surface tunnel bay on two ground trestles: a bellows-ribbed pressure sleeve on the 2.4 m port axis with hab-ports at both ends and handrails down both flanks. Bounding size 3.68 x 3.67 x 6.04 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-fwd (hab-port), port-aft (hab-port). Spans exactly 6.0 m between mating planes, the site grid module. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-connecting-tunnel-stra-fa801893","cdnUrl":"https://cdn.3dassets.dev/assets/11338/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-connecting-tunnel-stra-fa801893","thumbnailUrl":"https://cdn.3dassets.dev/assets/11338/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11338/v1/poster.webp","blurhash":"U9B|EGf500WZ~VIAE1-;00Io_3%M00xv_2Ri","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":176792,"triangles":3600,"vertices":10800,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.8400830103457748,-0.00013158442674532367,-3.0199999809265137],"max":[1.8400830103457748,3.669820839438952,3.0199999809265137]},"sizeMeters":[3.68,3.67,6.04],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:43.209Z","updatedAt":"2026-09-06T15:03:44.148Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11338/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PressurisedConnectingTunnelStraightBayLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11338/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11338/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11338/v1/model.glb\" alt=\"Pressurised connecting tunnel, straight bay (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11338/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11338/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11340","slug":"lunar-surface-colony-and-rovers-connecting-tunnel-elbo-5d6d9f37","title":"Pressurised connecting tunnel, quarter turn (Lunar Surface Colony and Rovers)","summary":"A quarter-turn tunnel bay that swings the run through ninety degrees between two hab-ports 3 m from the corner, carried on two ground trestles.","description":"A quarter-turn tunnel bay that swings the run through ninety degrees between two hab-ports 3 m from the corner, carried on two ground trestles. Bounding size 4.86 x 3.67 x 4.86 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-fwd (hab-port), port-stbd (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-connecting-tunnel-elbo-5d6d9f37","cdnUrl":"https://cdn.3dassets.dev/assets/11340/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-connecting-tunnel-elbo-5d6d9f37","thumbnailUrl":"https://cdn.3dassets.dev/assets/11340/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11340/v1/poster.webp","blurhash":"U8A,%rxu00M|-:j[IVa#00Rj~qay00WB_2t7","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":175624,"triangles":3572,"vertices":10716,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.840000033378601,-0.00010107765738509578,-1.840000033378601],"max":[3.0199999809265137,3.6700792551806014,3.0199999809265137]},"sizeMeters":[4.86,3.67,4.86],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:44.431Z","updatedAt":"2026-09-06T15:03:45.184Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11340/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PressurisedConnectingTunnelQuarterTurnLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11340/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11340/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11340/v1/model.glb\" alt=\"Pressurised connecting tunnel, quarter turn (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11340/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11340/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11339","slug":"lunar-surface-colony-and-rovers-connecting-tunnel-tee-1e234e20","title":"Pressurised connecting tunnel, tee junction (Lunar Surface Colony and Rovers)","summary":"A three-way tunnel junction on a central ground column: a lens-shaped pressure vessel with a crown surface hatch, an access ladder and three hab-ports 3 m out on the fore, aft and starboard axes.","description":"A three-way tunnel junction on a central ground column: a lens-shaped pressure vessel with a crown surface hatch, an access ladder and three hab-ports 3 m out on the fore, aft and starboard axes. Bounding size 4.86 x 4.50 x 6.04 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-fwd (hab-port), port-aft (hab-port), port-stbd (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-connecting-tunnel-tee-1e234e20","cdnUrl":"https://cdn.3dassets.dev/assets/11339/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-connecting-tunnel-tee-1e234e20","thumbnailUrl":"https://cdn.3dassets.dev/assets/11339/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11339/v1/poster.webp","blurhash":"UEB|KZ-;00D%%NRjIUt800IU~qxu9Fog-;Rj","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":175060,"triangles":3564,"vertices":10692,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.8399041885695455,2.7175075834051654e-7,-3.0199999809265137],"max":[3.0198617397767493,4.499885555589465,3.0199999809265137]},"sizeMeters":[4.86,4.5,6.04],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:44.264Z","updatedAt":"2026-09-06T15:03:44.992Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11339/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PressurisedConnectingTunnelTeeJunctionLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11339/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11339/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11339/v1/model.glb\" alt=\"Pressurised connecting tunnel, tee junction (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11339/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11339/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11341","slug":"lunar-surface-colony-and-rovers-airlock-with-dust-lock-c6b89bd0","title":"Airlock with dust-lock vestibule (Lunar Surface Colony and Rovers)","summary":"A two-chamber surface airlock on a raised plinth: a dust-lock vestibule with a hinged outer hatch and boarding ramp on named nodes, a five-nozzle dust removal rail, two rear-entry suit ports on the flank and a tunnel spur to the site grid.","description":"A two-chamber surface airlock on a raised plinth: a dust-lock vestibule with a hinged outer hatch and boarding ramp on named nodes, a five-nozzle dust removal rail, two rear-entry suit ports on the flank and a tunnel spur to the site grid. Bounding size 4.50 x 5.19 x 9.24 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: hatch-outer, ramp. Assembly ports: port-aft (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-airlock-with-dust-lock-c6b89bd0","cdnUrl":"https://cdn.3dassets.dev/assets/11341/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-airlock-with-dust-lock-c6b89bd0","thumbnailUrl":"https://cdn.3dassets.dev/assets/11341/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11341/v1/poster.webp","blurhash":"UACP;WD%00-;X9IUIUxu00-;~qRjIUxu%MRj","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":138356,"triangles":2740,"vertices":8220,"meshes":9,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-2.1500000953674316,-3.9047618205501067e-7,-3.020040617109338],"max":[2.3498416362302974,5.191308412021592,6.222683429718018]},"sizeMeters":[4.5,5.191,9.243],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:44.408Z","updatedAt":"2026-09-06T15:03:45.201Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11341/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function AirlockWithDustLockVestibuleLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11341/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11341/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11341/v1/model.glb\" alt=\"Airlock with dust-lock vestibule (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11341/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11341/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11342","slug":"lunar-surface-colony-and-rovers-cupola-observation-tur-7d39337f","title":"Cupola observation turret (Lunar Surface Colony and Rovers)","summary":"A 7.6 m glazed watch turret on a column and plinth: a twelve-panel window drum under a conical dust roof, an external ground stair to a platform, a mast light and a tunnel spur back to the site grid.","description":"A 7.6 m glazed watch turret on a column and plinth: a twelve-panel window drum under a conical dust roof, an external ground stair to a platform, a mast light and a tunnel spur back to the site grid. Bounding size 4.34 x 7.60 x 6.28 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-aft (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-cupola-observation-tur-7d39337f","cdnUrl":"https://cdn.3dassets.dev/assets/11342/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-cupola-observation-tur-7d39337f","thumbnailUrl":"https://cdn.3dassets.dev/assets/11342/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11342/v1/poster.webp","blurhash":"U5AK2Kof00IU01of?aRj00xu~qIU-pRjWYt7","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":111504,"triangles":2208,"vertices":6624,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-1.8398049761862847,-0.000027467974107159288,-3.020040617109338],"max":[2.4998049428076836,7.599999904632568,3.2630624468792897]},"sizeMeters":[4.34,7.6,6.283],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:44.386Z","updatedAt":"2026-09-06T15:03:45.329Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11342/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CupolaObservationTurretLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11342/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11342/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11342/v1/model.glb\" alt=\"Cupola observation turret (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11342/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11342/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11343","slug":"lunar-surface-colony-and-rovers-greenhouse-module-5cc34009","title":"Pressurised greenhouse module (Lunar Surface Colony and Rovers)","summary":"A 9.2 m barrel-vault growing module on a plinth: a ribbed transparent shell over three tiers of hydroponic trays and LED light bars either side of a central service spine, with hab-ports on both end walls.","description":"A 9.2 m barrel-vault growing module on a plinth: a ribbed transparent shell over three tiers of hydroponic trays and LED light bars either side of a central service spine, with hab-ports on both end walls. Bounding size 5.80 x 3.94 x 9.60 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-fwd (hab-port), port-aft (hab-port). Trays and light bars are modelled; no crop geometry is included. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-greenhouse-module-5cc34009","cdnUrl":"https://cdn.3dassets.dev/assets/11343/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-greenhouse-module-5cc34009","thumbnailUrl":"https://cdn.3dassets.dev/assets/11343/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11343/v1/poster.webp","blurhash":"U7A,%v~WVrWF4.9FjE%g00D%E2of~W?cxvRP","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":186812,"triangles":3782,"vertices":11346,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-2.600177110676712,-0.00015961677795560403,-4.800000190734863],"max":[3.2001219921437745,3.942221634109729,4.800000190734863]},"sizeMeters":[5.8,3.942,9.6],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:45.090Z","updatedAt":"2026-09-06T15:03:46.012Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11343/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PressurisedGreenhouseModuleLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11343/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11343/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11343/v1/model.glb\" alt=\"Pressurised greenhouse module (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11343/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11343/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11344","slug":"lunar-surface-colony-and-rovers-medical-module-1b53bc4f","title":"Medical and crew care module (Lunar Surface Colony and Rovers)","summary":"A 4.6 m diameter vertical pressure vessel on a six-leg ring with a dust skirt, two viewports, a rack of external gas bottles, an eight-panel wall radiator and a casualty hoist davit, with hab-ports on the aft and starboard faces.","description":"A 4.6 m diameter vertical pressure vessel on a six-leg ring with a dust skirt, two viewports, a rack of external gas bottles, an eight-panel wall radiator and a casualty hoist davit, with hab-ports on the aft and starboard faces. Bounding size 5.85 x 6.88 x 6.40 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: port-aft (hab-port), port-stbd (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-medical-module-1b53bc4f","cdnUrl":"https://cdn.3dassets.dev/assets/11344/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-medical-module-1b53bc4f","thumbnailUrl":"https://cdn.3dassets.dev/assets/11344/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11344/v1/poster.webp","blurhash":"UFCi{%%M00D%M{WBofog00M{~qxuRjoft7Rj","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":219020,"triangles":4464,"vertices":13392,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-2.8282679426050508,0,-3.200867271752223],"max":[3.0199999809265137,6.876885414123535,3.200867271752223]},"sizeMeters":[5.848,6.877,6.402],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:45.156Z","updatedAt":"2026-09-06T15:03:46.140Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11344/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MedicalAndCrewCareModuleLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11344/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11344/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11344/v1/model.glb\" alt=\"Medical and crew care module (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11344/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11344/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11345","slug":"lunar-surface-colony-and-rovers-workshop-module-652acc61","title":"Pressurised workshop and vehicle bay (Lunar Surface Colony and Rovers)","summary":"A 9.4 m wide arched vehicle bay on a graded slab: a ribbed hard shell with a 5.2 m roll-up door on a named node, exterior workbench, gas bottle rack and two floodlights, and a hab-port spur on the port flank.","description":"A 9.4 m wide arched vehicle bay on a graded slab: a ribbed hard shell with a 5.2 m roll-up door on a named node, exterior workbench, gas bottle rack and two floodlights, and a hab-port spur on the port flank. Bounding size 10.20 x 4.79 x 8.75 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: door-roll. Assembly ports: port-port (hab-port). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-workshop-module-652acc61","cdnUrl":"https://cdn.3dassets.dev/assets/11345/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-workshop-module-652acc61","thumbnailUrl":"https://cdn.3dassets.dev/assets/11345/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11345/v1/poster.webp","blurhash":"U7Dvfx4o00~q9ZWqRje.00-;~q9Fr?t6_3kD","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":104200,"triangles":2070,"vertices":6210,"meshes":7,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-5.099999904632568,-0.0002349891585051722,-4.20037529912165],"max":[5.099999904632568,4.7939019246929515,4.550005645919596]},"sizeMeters":[10.2,4.794,8.75],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:45.331Z","updatedAt":"2026-09-06T15:03:46.182Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11345/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PressurisedWorkshopAndVehicleBayLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11345/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11345/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11345/v1/model.glb\" alt=\"Pressurised workshop and vehicle bay (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11345/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11345/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11346","slug":"lunar-surface-colony-and-rovers-regolith-excavator-ee670af4","title":"Regolith bucket drum excavator (Lunar Surface Colony and Rovers)","summary":"A 5.5 m four-wheel regolith excavator: a counter-rotating bucket drum with three rows of scoops on a hydraulic lift boom, a tipping spoil body, a drive cabinet and a suited operator station, all on wire-mesh wheels with steering uprights.","description":"A 5.5 m four-wheel regolith excavator: a counter-rotating bucket drum with three rows of scoops on a hydraulic lift boom, a tipping spoil body, a drive cabinet and a suited operator station, all on wire-mesh wheels with steering uprights. Bounding size 2.98 x 2.94 x 5.68 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-front-right, steer-front-right, wheel-rear-right, steer-rear-right, wheel-front-left, steer-front-left, wheel-rear-left, steer-rear-left, boom, bucket-drum, dump-body. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-regolith-excavator-ee670af4","cdnUrl":"https://cdn.3dassets.dev/assets/11346/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-regolith-excavator-ee670af4","thumbnailUrl":"https://cdn.3dassets.dev/assets/11346/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11346/v1/poster.webp","blurhash":"U6CP@d0000?c_300Mx~p00?b_2%100~p-=01","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":165212,"triangles":5632,"vertices":16896,"meshes":18,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.4900094620454671,-4.768371586472142e-9,-2.2200000047683717],"max":[1.4900094620454671,2.943393525087128,3.463549959257567]},"sizeMeters":[2.98,2.943,5.684],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:45.757Z","updatedAt":"2026-09-06T15:03:46.670Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11346/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RegolithBucketDrumExcavatorLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11346/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11346/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11346/v1/model.glb\" alt=\"Regolith bucket drum excavator (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11346/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11346/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11347","slug":"lunar-surface-colony-and-rovers-regolith-hopper-screen-2da0612f","title":"Regolith hopper and screening deck (Lunar Surface Colony and Rovers)","summary":"A 4.4 m feed hopper on four splayed legs over an inclined vibrating screen deck: nine screen bars, two shaker motors on spring mounts, a fines discharge chute into a spoil pile, an oversize chute, an access ladder and a walkway.","description":"A 4.4 m feed hopper on four splayed legs over an inclined vibrating screen deck: nine screen bars, two shaker motors on spring mounts, a fines discharge chute into a spoil pile, an oversize chute, an access ladder and a walkway. Bounding size 3.80 x 4.65 x 5.24 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-regolith-hopper-screen-2da0612f","cdnUrl":"https://cdn.3dassets.dev/assets/11347/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-regolith-hopper-screen-2da0612f","thumbnailUrl":"https://cdn.3dassets.dev/assets/11347/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11347/v1/poster.webp","blurhash":"U5B:v#NZ00spIV4.IA~W00xu~qt8D$?H?c9F","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":77356,"triangles":1512,"vertices":4536,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.8999320358400846,0.00006412049472315218,-1.889971137046814],"max":[1.8999320358400846,4.647552967071533,3.3499648865772444]},"sizeMeters":[3.8,4.647,5.24],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:46.457Z","updatedAt":"2026-09-06T15:03:46.516Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11347/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RegolithHopperAndScreeningDeckLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11347/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11347/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11347/v1/model.glb\" alt=\"Regolith hopper and screening deck (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11347/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11347/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11348","slug":"lunar-surface-colony-and-rovers-oxygen-extraction-plan-26d38855","title":"Oxygen extraction plant skid (Lunar Surface Colony and Rovers)","summary":"A 4.4 m process skid on bearing pads: two hydrogen reduction reactor vessels with support skirts, a cyclone separator, a helical condenser coil, gas pipework, a control cabinet and a rack of product gas bottles.","description":"A 4.4 m process skid on bearing pads: two hydrogen reduction reactor vessels with support skirts, a cyclone separator, a helical condenser coil, gas pipework, a control cabinet and a rack of product gas bottles. Bounding size 4.70 x 3.69 x 3.15 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-oxygen-extraction-plan-26d38855","cdnUrl":"https://cdn.3dassets.dev/assets/11348/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-oxygen-extraction-plan-26d38855","thumbnailUrl":"https://cdn.3dassets.dev/assets/11348/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11348/v1/poster.webp","blurhash":"U9ECqJ%%009E4.-oo#D%00R4?vxv^*9vxZ-:","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":117252,"triangles":2358,"vertices":7074,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-2.2799999713897705,-0.00008462218051974446,-1.5730735350489],"max":[2.4200000762939453,3.686676485812722,1.5730735350489]},"sizeMeters":[4.7,3.687,3.146],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:46.884Z","updatedAt":"2026-09-06T15:03:47.722Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11348/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function OxygenExtractionPlantSkidLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11348/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11348/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11348/v1/model.glb\" alt=\"Oxygen extraction plant skid (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11348/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11348/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11349","slug":"lunar-surface-colony-and-rovers-water-processing-skid-61307240","title":"Water processing skid (Lunar Surface Colony and Rovers)","summary":"A 4 m water recovery skid on bearing pads: two horizontal holding vessels, a pump set with a drive motor, three filter columns on a header, a control cabinet, run pipework and a railed maintenance walkway with a ladder.","description":"A 4 m water recovery skid on bearing pads: two horizontal holding vessels, a pump set with a drive motor, three filter columns on a header, a control cabinet, run pipework and a railed maintenance walkway with a ladder. Bounding size 4.25 x 2.43 x 3.30 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-water-processing-skid-61307240","cdnUrl":"https://cdn.3dassets.dev/assets/11349/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-water-processing-skid-61307240","thumbnailUrl":"https://cdn.3dassets.dev/assets/11349/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11349/v1/poster.webp","blurhash":"U7Dl.y?w00Mw^JE2EQxs0000tm?a9a?GkDIp","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":108460,"triangles":2176,"vertices":6528,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-2.166895627975464,0.000016907062042159637,-1.850002665233324],"max":[2.0799999237060547,2.4333529326954815,1.4500000476837158]},"sizeMeters":[4.247,2.433,3.3],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:47.203Z","updatedAt":"2026-09-06T15:03:47.840Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11349/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function WaterProcessingSkidLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11349/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11349/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11349/v1/model.glb\" alt=\"Water processing skid (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11349/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11349/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11350","slug":"lunar-surface-colony-and-rovers-sintering-print-gantry-6b5e8ee0","title":"Regolith sintering print gantry (Lunar Surface Colony and Rovers)","summary":"A 5 m portal gantry on 8 m ground rails that sinters regolith into structure: a rolling portal with a cross bridge, a sintering head on a named slide, a part printed regolith wall of ten courses on its bed, a feed hopper and a power cabinet.","description":"A 5 m portal gantry on 8 m ground rails that sinters regolith into structure: a rolling portal with a cross bridge, a sintering head on a named slide, a part printed regolith wall of ten courses on its bed, a feed hopper and a power cabinet. Bounding size 5.50 x 3.70 x 8.60 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: gantry, print-head. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-sintering-print-gantry-6b5e8ee0","cdnUrl":"https://cdn.3dassets.dev/assets/11350/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-sintering-print-gantry-6b5e8ee0","thumbnailUrl":"https://cdn.3dassets.dev/assets/11350/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11350/v1/poster.webp","blurhash":"U59@S6xv00RPD%WBt6Ri00jY~qkC?bt7xvxw","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":66636,"triangles":1268,"vertices":3804,"meshes":8,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-2.75,0.00006755825336657306,-4.599999904632568],"max":[2.75,3.700103900027558,4]},"sizeMeters":[5.5,3.7,8.6],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:46.912Z","updatedAt":"2026-09-06T15:03:47.891Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11350/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RegolithSinteringPrintGantryLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11350/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11350/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11350/v1/model.glb\" alt=\"Regolith sintering print gantry (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11350/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11350/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11351","slug":"lunar-surface-colony-and-rovers-solar-array-row-46e9caec","title":"Fixed solar array row (Lunar Surface Colony and Rovers)","summary":"A 9.9 m row of six fixed photovoltaic panels on braced ground posts with bearing pads, a spine beam, a cable trunk and a combiner box, set at a steep tilt for a low sun.","description":"A 9.9 m row of six fixed photovoltaic panels on braced ground posts with bearing pads, a spine beam, a cable trunk and a combiner box, set at a steep tilt for a low sun. Bounding size 3.00 x 2.12 x 10.15 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-solar-array-row-46e9caec","cdnUrl":"https://cdn.3dassets.dev/assets/11351/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-solar-array-row-46e9caec","thumbnailUrl":"https://cdn.3dassets.dev/assets/11351/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11351/v1/poster.webp","blurhash":"U37w?3Rj00og?c4nM_-=00Rj?v%M4T~qx]9F","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":67428,"triangles":1316,"vertices":3948,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.500126095247701,0.00023682491885268497,-5.199999809265137],"max":[1.500126095247701,2.1184446136373793,4.949999809265137]},"sizeMeters":[3,2.118,10.15],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:47.455Z","updatedAt":"2026-09-06T15:03:47.535Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11351/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FixedSolarArrayRowLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11351/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11351/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11351/v1/model.glb\" alt=\"Fixed solar array row (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11351/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11351/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11353","slug":"lunar-surface-colony-and-rovers-solar-array-row-tracke-8b4a81d7","title":"Tracking solar array row (Lunar Surface Colony and Rovers)","summary":"The same six-panel row rebuilt on taller posts with a horizontal torque tube, so each panel is a named node that rotates to follow the sun across the sky.","description":"The same six-panel row rebuilt on taller posts with a horizontal torque tube, so each panel is a named node that rotates to follow the sun across the sky. Bounding size 2.55 x 2.09 x 10.15 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: array-1, array-2, array-3, array-4, array-5, array-6. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-solar-array-row-tracke-8b4a81d7","cdnUrl":"https://cdn.3dassets.dev/assets/11353/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-solar-array-row-tracke-8b4a81d7","thumbnailUrl":"https://cdn.3dassets.dev/assets/11353/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11353/v1/poster.webp","blurhash":"U36kemtAIRjZtUDia]t900nxtSo$I7?wIcab","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":58056,"triangles":1160,"vertices":3480,"meshes":12,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.2767739145488077,-0.00013197326942471221,-5.199999809265137],"max":[1.2767739145488077,2.086528429034195,4.949999809265137]},"sizeMeters":[2.554,2.087,10.15],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:47.724Z","updatedAt":"2026-09-06T15:03:48.695Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11353/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function TrackingSolarArrayRowLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11353/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11353/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11353/v1/model.glb\" alt=\"Tracking solar array row (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11353/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11353/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11352","slug":"lunar-surface-colony-and-rovers-vertical-solar-tower-9095a1ac","title":"Vertical solar tower (Lunar Surface Colony and Rovers)","summary":"An 8.4 m guyed solar mast carrying four vertical photovoltaic blades on a ballasted berm foundation, the layout used near a pole where the sun stays close to the horizon, with a beacon and a ground junction box.","description":"An 8.4 m guyed solar mast carrying four vertical photovoltaic blades on a ballasted berm foundation, the layout used near a pole where the sun stays close to the horizon, with a beacon and a ground junction box. Bounding size 4.45 x 9.02 x 4.40 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-vertical-solar-tower-9095a1ac","cdnUrl":"https://cdn.3dassets.dev/assets/11352/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-vertical-solar-tower-9095a1ac","thumbnailUrl":"https://cdn.3dassets.dev/assets/11352/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11352/v1/poster.webp","blurhash":"U36RP}?d0000RPahR.R%$rW8R@xyRgawohj_","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":72436,"triangles":1412,"vertices":4236,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-2.200000047683716,-0.00007934948100843386,-2.200000047683716],"max":[2.2498156763878123,9.020000457763672,2.200000047683716]},"sizeMeters":[4.45,9.02,4.4],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:47.678Z","updatedAt":"2026-09-06T15:03:48.689Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11352/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function VerticalSolarTowerLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11352/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11352/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11352/v1/model.glb\" alt=\"Vertical solar tower (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11352/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11352/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11354","slug":"lunar-surface-colony-and-rovers-radiator-bank-2dcdd289","title":"Thermal radiator bank (Lunar Surface Colony and Rovers)","summary":"A 4.6 m ground-mounted heat rejection bank: six vertical radiator fins with header pipes strung between an upper and lower manifold on a braced frame, with a pump module and connecting runs.","description":"A 4.6 m ground-mounted heat rejection bank: six vertical radiator fins with header pipes strung between an upper and lower manifold on a braced frame, with a pump module and connecting runs. Bounding size 5.45 x 2.97 x 1.65 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-radiator-bank-2dcdd289","cdnUrl":"https://cdn.3dassets.dev/assets/11354/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-radiator-bank-2dcdd289","thumbnailUrl":"https://cdn.3dassets.dev/assets/11354/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11354/v1/poster.webp","blurhash":"U6B:vz%M00M_9Z?cay9F00RlR.tQ~W?H%M9F","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":70600,"triangles":1420,"vertices":4260,"meshes":3,"materials":3,"textures":0,"animations":[],"boundingBox":{"min":[-2.4000000953674316,0.000045781326586086246,-0.8228694541477526],"max":[3.049999952316284,2.9699303850531122,0.8228694541477526]},"sizeMeters":[5.45,2.97,1.646],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:48.046Z","updatedAt":"2026-09-06T15:03:49.025Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11354/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ThermalRadiatorBankLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11354/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11354/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11354/v1/model.glb\" alt=\"Thermal radiator bank (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11354/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11354/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11355","slug":"lunar-surface-colony-and-rovers-battery-container-aada8eb1","title":"Battery storage container (Lunar Surface Colony and Rovers)","summary":"A 3.4 m energy storage container on a bolted skid with bearing pads: five bays of cells behind a ribbed shell, a bank of cooling fins, a switchgear door with a state of charge panel, two heavy cable couplings and a roof handrail.","description":"A 3.4 m energy storage container on a bolted skid with bearing pads: five bays of cells behind a ribbed shell, a bank of cooling fins, a switchgear door with a state of charge panel, two heavy cable couplings and a roof handrail. Bounding size 4.31 x 2.45 x 2.15 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-battery-container-aada8eb1","cdnUrl":"https://cdn.3dassets.dev/assets/11355/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-battery-container-aada8eb1","thumbnailUrl":"https://cdn.3dassets.dev/assets/11355/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11355/v1/poster.webp","blurhash":"UDEyVu_400-p~V-;M}M{00M_tS9FD%M{NHIp","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":51148,"triangles":984,"vertices":2952,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.7799999713897705,-0.00010833735832294078,-1.0730954751681119],"max":[2.5275394916534424,2.448551841602482,1.0730954751681119]},"sizeMeters":[4.308,2.449,2.146],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:48.240Z","updatedAt":"2026-09-06T15:03:49.176Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11355/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function BatteryStorageContainerLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11355/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11355/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11355/v1/model.glb\" alt=\"Battery storage container (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11355/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11355/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11356","slug":"lunar-surface-colony-and-rovers-nuclear-power-unit-20c9f5d0","title":"Nuclear power unit with shielding berm (Lunar Surface Colony and Rovers)","summary":"A 6.5 m surface fission power unit standing inside a graded regolith shielding berm: a ribbed reactor drum, a conical shadow shield, six heat pipe stalks up to a conical radiator umbrella with twelve spines, an instrument mast, a power cabinet and four keep-out markers.","description":"A 6.5 m surface fission power unit standing inside a graded regolith shielding berm: a ribbed reactor drum, a conical shadow shield, six heat pipe stalks up to a conical radiator umbrella with twelve spines, an instrument mast, a power cabinet and four keep-out markers. Bounding size 9.80 x 6.84 x 10.13 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-nuclear-power-unit-20c9f5d0","cdnUrl":"https://cdn.3dassets.dev/assets/11356/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-nuclear-power-unit-20c9f5d0","thumbnailUrl":"https://cdn.3dassets.dev/assets/11356/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11356/v1/poster.webp","blurhash":"U684e{sm00NxtTS4M_s900n~_4bc9Eoe.8WB","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":102176,"triangles":2032,"vertices":6096,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-4.900000095367432,-0.000231580294480338,-4.864110327525146],"max":[4.900000095367432,6.840000152587891,5.264054297132095]},"sizeMeters":[9.8,6.84,10.128],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:49.085Z","updatedAt":"2026-09-06T15:03:50.093Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11356/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function NuclearPowerUnitWithShieldingBermLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11356/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11356/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11356/v1/model.glb\" alt=\"Nuclear power unit with shielding berm (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11356/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11356/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11357","slug":"lunar-surface-colony-and-rovers-cargo-lander-4fa8f3ab","title":"Cargo lander with unloading ramp (Lunar Surface Colony and Rovers)","summary":"A 7 m four-leg cargo lander on crushable footpads: an octagonal deck over four descent tanks and an engine, a cargo pallet with a stores container and tie-down rails, a hinged unloading ramp on a named node, four attitude control pods and a ladder.","description":"A 7 m four-leg cargo lander on crushable footpads: an octagonal deck over four descent tanks and an engine, a cargo pallet with a stores container and tie-down rails, a hinged unloading ramp on a named node, four attitude control pods and a ladder. Bounding size 8.24 x 4.70 x 8.47 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: ramp. Assembly ports: pad-contact (pad). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-cargo-lander-4fa8f3ab","cdnUrl":"https://cdn.3dassets.dev/assets/11357/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-cargo-lander-4fa8f3ab","thumbnailUrl":"https://cdn.3dassets.dev/assets/11357/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11357/v1/poster.webp","blurhash":"U897eLog00oIofWBM{of00V@~qWYM{t6-qRk","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":192496,"triangles":3918,"vertices":11754,"meshes":6,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-4.119999885559082,-0.00015376271714595546,-4.1044085898710625],"max":[4.119999885559082,4.69986746968736,4.360866886160107]},"sizeMeters":[8.24,4.7,8.465],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:49.585Z","updatedAt":"2026-09-06T15:03:50.251Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11357/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CargoLanderWithUnloadingRampLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11357/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11357/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11357/v1/model.glb\" alt=\"Cargo lander with unloading ramp (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11357/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11357/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11358","slug":"lunar-surface-colony-and-rovers-crew-lander-238ddfaa","title":"Crew lander with ascent cabin (Lunar Surface Colony and Rovers)","summary":"A 6.6 m four-leg crew lander: an octagonal descent stage on crushable footpads with four tanks and an engine, a pressurised ascent cabin with three viewports, an EVA hatch onto a railed porch, a boarding ladder, a docking cone, antennas and four attitude control pods.","description":"A 6.6 m four-leg crew lander: an octagonal descent stage on crushable footpads with four tanks and an engine, a pressurised ascent cabin with three viewports, an EVA hatch onto a railed porch, a boarding ladder, a docking cone, antennas and four attitude control pods. Bounding size 7.76 x 6.35 x 7.73 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: pad-contact (pad). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-crew-lander-238ddfaa","cdnUrl":"https://cdn.3dassets.dev/assets/11358/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-crew-lander-238ddfaa","thumbnailUrl":"https://cdn.3dassets.dev/assets/11358/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11358/v1/poster.webp","blurhash":"UAAJ{3xu00NGM_RjRkoz00Rj~qxtR*oy%Mja","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":200828,"triangles":4088,"vertices":12264,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-3.880000114440918,-0.00009284497660733138,-3.865317048728748],"max":[3.880000114440918,6.35033307553691,3.865317048728748]},"sizeMeters":[7.76,6.35,7.731],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:49.514Z","updatedAt":"2026-09-06T15:03:50.385Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11358/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CrewLanderWithAscentCabinLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11358/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11358/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11358/v1/model.glb\" alt=\"Crew lander with ascent cabin (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11358/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11358/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11359","slug":"lunar-surface-colony-and-rovers-landing-pad-60b1865c","title":"Sintered landing pad (Lunar Surface Colony and Rovers)","summary":"A 14 m circular landing pad graded and sintered into the regolith: a raised apron with a sixteen-segment plate pattern, three concentric target rings and a centre bullseye, ringed by eight lit edge markers.","description":"A 14 m circular landing pad graded and sintered into the regolith: a raised apron with a sixteen-segment plate pattern, three concentric target rings and a centre bullseye, ringed by eight lit edge markers. Bounding size 14.00 x 1.34 x 14.00 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: pad-centre (pad), pad-edge-fwd (pad), pad-edge-aft (pad), pad-edge-stbd (pad), pad-edge-port (pad). The pad presents an upward pad-centre marker for a lander and four outward rim markers for deflectors and berms. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-landing-pad-60b1865c","cdnUrl":"https://cdn.3dassets.dev/assets/11359/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-landing-pad-60b1865c","thumbnailUrl":"https://cdn.3dassets.dev/assets/11359/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11359/v1/poster.webp","blurhash":"UAB3ynxt00WBoyfQaxfj00Rj~qj[M|fkofaz","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":107332,"triangles":2172,"vertices":6516,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-7,0.00020508080740000434,-7],"max":[7,1.3399130216142745,7]},"sizeMeters":[14,1.34,14],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:49.404Z","updatedAt":"2026-09-06T15:03:50.407Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11359/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SinteredLandingPadLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11359/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11359/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11359/v1/model.glb\" alt=\"Sintered landing pad (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11359/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11359/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11360","slug":"lunar-surface-colony-and-rovers-blast-deflector-wall-7c8478ba","title":"Landing pad blast deflector wall (Lunar Surface Colony and Rovers)","summary":"A 6 m wide curved blast deflector for a landing pad rim: a battered concave wall on six raked buttresses that spread to 8.9 m, with ballast blocks and bearing pads, topped by five hazard markers.","description":"A 6 m wide curved blast deflector for a landing pad rim: a battered concave wall on six raked buttresses that spread to 8.9 m, with ballast blocks and bearing pads, topped by five hazard markers. Bounding size 8.93 x 3.45 x 3.64 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: pad-in (pad). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-blast-deflector-wall-7c8478ba","cdnUrl":"https://cdn.3dassets.dev/assets/11360/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-blast-deflector-wall-7c8478ba","thumbnailUrl":"https://cdn.3dassets.dev/assets/11360/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11360/v1/poster.webp","blurhash":"U4Amh:0100^+m*%gE3IU00%1~qD*FhwH?FJC","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":50496,"triangles":984,"vertices":2952,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-4.4653496742248535,-0.00008675396018578696,-1.8071709577598218],"max":[4.4653496742248535,3.4499476761872794,1.8316742216285236]},"sizeMeters":[8.931,3.45,3.639],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:50.299Z","updatedAt":"2026-09-06T15:03:51.244Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11360/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function LandingPadBlastDeflectorWallLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11360/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11360/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11360/v1/model.glb\" alt=\"Landing pad blast deflector wall (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11360/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11360/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11361","slug":"lunar-surface-colony-and-rovers-blast-berm-segment-5664c8d0","title":"Blast berm segment (Lunar Surface Colony and Rovers)","summary":"A 6 m modular regolith blast berm for a pad perimeter: a graded 2 m bank with a compacted toe, five marker posts and a retaining rail on the pad side.","description":"A 6 m modular regolith blast berm for a pad perimeter: a graded 2 m bank with a compacted toe, five marker posts and a retaining rail on the pad side. Bounding size 6.00 x 2.08 x 4.36 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Assembly ports: pad-in (pad). Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-blast-berm-segment-5664c8d0","cdnUrl":"https://cdn.3dassets.dev/assets/11361/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-blast-berm-segment-5664c8d0","thumbnailUrl":"https://cdn.3dassets.dev/assets/11361/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11361/v1/poster.webp","blurhash":"U8Dl+o_400M{ITt7t7V@009F?ba#x^V?aeWr","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":31028,"triangles":612,"vertices":1836,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-3,-0.00007858131061877494,-0.4100033515970435],"max":[3,2.0795136914027816,3.9459472486497638]},"sizeMeters":[6,2.08,4.356],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:50.411Z","updatedAt":"2026-09-06T15:03:51.283Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11361/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function BlastBermSegmentLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11361/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11361/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11361/v1/model.glb\" alt=\"Blast berm segment (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11361/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11361/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11362","slug":"lunar-surface-colony-and-rovers-propellant-tank-farm-67af3d72","title":"Cryogenic propellant tank farm (Lunar Surface Colony and Rovers)","summary":"A 7.6 m propellant storage set on a graded apron: two 3 m spherical cryogenic tanks on skirt stands with radial braces and relief valve heads, a vaporiser, a valve gallery, run pipework and a railed access platform with a ladder.","description":"A 7.6 m propellant storage set on a graded apron: two 3 m spherical cryogenic tanks on skirt stands with radial braces and relief valve heads, a vaporiser, a valve gallery, run pipework and a railed access platform with a ladder. Bounding size 7.60 x 4.18 x 4.40 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-propellant-tank-farm-67af3d72","cdnUrl":"https://cdn.3dassets.dev/assets/11362/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-propellant-tank-farm-67af3d72","thumbnailUrl":"https://cdn.3dassets.dev/assets/11362/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11362/v1/poster.webp","blurhash":"U8Eo=9?b00M{9G-;jbD%00D%~qM{M_D%?b-;","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":125928,"triangles":2540,"vertices":7620,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-3.799999952316284,-0.00019836756415402002,-2.199957246480908],"max":[3.799999952316284,4.179869287720551,2.199957246480908]},"sizeMeters":[7.6,4.18,4.4],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:50.676Z","updatedAt":"2026-09-06T15:03:51.563Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11362/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CryogenicPropellantTankFarmLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11362/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11362/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11362/v1/model.glb\" alt=\"Cryogenic propellant tank farm (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11362/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11362/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11363","slug":"lunar-surface-colony-and-rovers-cryo-transfer-arm-0ac99d23","title":"Cryogenic transfer arm tower (Lunar Surface Colony and Rovers)","summary":"A 6.9 m braced transfer tower with a counterweighted articulated arm: an inner boom on a slew bearing, a folding outer boom, a coupling head and a draped vacuum jacketed hose, each joint a named node, with a ground control cabinet.","description":"A 6.9 m braced transfer tower with a counterweighted articulated arm: an inner boom on a slew bearing, a folding outer boom, a coupling head and a draped vacuum jacketed hose, each joint a named node, with a ground control cabinet. Bounding size 3.27 x 7.29 x 6.99 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: arm-inner, arm-outer, coupling. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-cryo-transfer-arm-0ac99d23","cdnUrl":"https://cdn.3dassets.dev/assets/11363/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-cryo-transfer-arm-0ac99d23","thumbnailUrl":"https://cdn.3dassets.dev/assets/11363/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11363/v1/poster.webp","blurhash":"U48gsnIV00_2~St84@aIR2M{Ng-o?a9F9F_2","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":59552,"triangles":1136,"vertices":3408,"meshes":7,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-1.270150800741861,0,-1.600000023841858],"max":[2.0001302614462917,7.294303994838613,5.392492607303122]},"sizeMeters":[3.27,7.294,6.992],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:50.775Z","updatedAt":"2026-09-06T15:03:51.660Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11363/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CryogenicTransferArmTowerLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11363/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11363/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11363/v1/model.glb\" alt=\"Cryogenic transfer arm tower (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11363/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11363/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11364","slug":"lunar-surface-colony-and-rovers-approach-light-beacon-0f82921e","title":"Approach light beacon (Lunar Surface Colony and Rovers)","summary":"A 4.9 m guyed approach beacon for a landing site: a tripod-braced mast with ballast blocks and bearing pads, a strobe head under a glass dome, three hazard bands and a tilted photovoltaic panel feeding a battery box.","description":"A 4.9 m guyed approach beacon for a landing site: a tripod-braced mast with ballast blocks and bearing pads, a strobe head under a glass dome, three hazard bands and a tilted photovoltaic panel feeding a battery box. Bounding size 3.23 x 4.95 x 2.88 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-approach-light-beacon-0f82921e","cdnUrl":"https://cdn.3dassets.dev/assets/11364/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-approach-light-beacon-0f82921e","thumbnailUrl":"https://cdn.3dassets.dev/assets/11364/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11364/v1/poster.webp","blurhash":"U37nL9~q000000D$_3-=D*WU-:xu?ut8Mxa]","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":41696,"triangles":754,"vertices":2262,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-1.5985347032546997,-0.00007112899624467373,-1.8031719027303503],"max":[1.6316546201705933,4.949990117848128,1.0812779886425625]},"sizeMeters":[3.23,4.95,2.884],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:51.856Z","updatedAt":"2026-09-06T15:03:52.653Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11364/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ApproachLightBeaconLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11364/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11364/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11364/v1/model.glb\" alt=\"Approach light beacon (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11364/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11364/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11365","slug":"lunar-surface-colony-and-rovers-open-rover-unpressuris-e64ce25b","title":"Open unpressurised crew rover (Lunar Surface Colony and Rovers)","summary":"A 2.9 m four-wheel open crew rover for suited drivers: a tubular chassis on four open wire-mesh wheels with steering uprights, double wishbones and fenders, two mesh seats, a T-handle controller, a steerable dish, a whip antenna, a stereo camera mast and a rear equipment pallet.","description":"A 2.9 m four-wheel open crew rover for suited drivers: a tubular chassis on four open wire-mesh wheels with steering uprights, double wishbones and fenders, two mesh seats, a T-handle controller, a steerable dish, a whip antenna, a stereo camera mast and a rear equipment pallet. Bounding size 2.31 x 2.52 x 3.46 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-front-right, steer-front-right, wheel-front-left, steer-front-left, wheel-rear-right, steer-rear-right, wheel-rear-left, steer-rear-left, hand-controller, antenna-dish, camera. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-open-rover-unpressuris-e64ce25b","cdnUrl":"https://cdn.3dassets.dev/assets/11365/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-open-rover-unpressuris-e64ce25b","thumbnailUrl":"https://cdn.3dassets.dev/assets/11365/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11365/v1/poster.webp","blurhash":"U7AwC$x]00Rj00IVt8%L00RkxuV?_N%2-:R.","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":256308,"triangles":7756,"vertices":23268,"meshes":21,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.155033630778618,2.384185793236071e-9,-1.7299107313156128],"max":[1.155033630778618,2.519935568907105,1.7299107313156128]},"sizeMeters":[2.31,2.52,3.46],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:51.995Z","updatedAt":"2026-09-06T15:03:52.826Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11365/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function OpenUnpressurisedCrewRoverLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11365/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11365/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11365/v1/model.glb\" alt=\"Open unpressurised crew rover (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11365/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11365/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11366","slug":"lunar-surface-colony-and-rovers-open-rover-unpressuris-b1f61ea8","title":"Open crew rover, science fit (Lunar Surface Colony and Rovers)","summary":"The open crew rover rigged for traverse science: a tail-mounted core drill, an instrument pallet on the rear deck, a stowed magnetometer boom on a named node and a sample container in place of the stores box.","description":"The open crew rover rigged for traverse science: a tail-mounted core drill, an instrument pallet on the rear deck, a stowed magnetometer boom on a named node and a sample container in place of the stores box. Bounding size 2.31 x 2.52 x 4.17 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-front-right, steer-front-right, wheel-front-left, steer-front-left, wheel-rear-right, steer-rear-right, wheel-rear-left, steer-rear-left, hand-controller, antenna-dish, camera, boom-magnetometer. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-open-rover-unpressuris-b1f61ea8","cdnUrl":"https://cdn.3dassets.dev/assets/11366/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-open-rover-unpressuris-b1f61ea8","thumbnailUrl":"https://cdn.3dassets.dev/assets/11366/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11366/v1/poster.webp","blurhash":"U69@O|?v00xG00D*%N-o00IUxtIA_N-;%2R:","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":244548,"triangles":7512,"vertices":22536,"meshes":21,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.155033630778618,2.384185793236071e-9,-2.440000081062317],"max":[1.155033630778618,2.520012948578935,1.7299107313156128]},"sizeMeters":[2.31,2.52,4.17],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:52.741Z","updatedAt":"2026-09-06T15:03:52.951Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11366/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function OpenCrewRoverScienceFitLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11366/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11366/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11366/v1/model.glb\" alt=\"Open crew rover, science fit (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11366/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11366/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11367","slug":"lunar-surface-colony-and-rovers-pressurised-long-range-ae81ee5b","title":"Pressurised long range rover (Lunar Surface Colony and Rovers)","summary":"A 6.3 m six-wheel pressurised traverse rover: a lofted cabin over a bogie chassis on six wire-mesh wheels, a steered front pair, wraparound glazing, roof photovoltaics and radiators, a steerable dish, a camera mast and two rear entry suit ports with a boarding ladder.","description":"A 6.3 m six-wheel pressurised traverse rover: a lofted cabin over a bogie chassis on six wire-mesh wheels, a steered front pair, wraparound glazing, roof photovoltaics and radiators, a steerable dish, a camera mast and two rear entry suit ports with a boarding ladder. Bounding size 2.99 x 4.30 x 6.81 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-front-right, steer-front-right, wheel-mid-right, wheel-rear-right, bogie-right, wheel-front-left, steer-front-left, wheel-mid-left, wheel-rear-left, bogie-left, antenna-dish, camera. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-pressurised-long-range-ae81ee5b","cdnUrl":"https://cdn.3dassets.dev/assets/11367/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-pressurised-long-range-ae81ee5b","thumbnailUrl":"https://cdn.3dassets.dev/assets/11367/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11367/v1/poster.webp","blurhash":"U6CGZ1%M00-p010Kxt?b00of?vM{-:~WxvD*","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":242596,"triangles":9148,"vertices":27444,"meshes":24,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.4958607639876271,7.152557435219364e-9,-3.6600000858306885],"max":[1.4958607639876271,4.303915495203707,3.1500000953674316]},"sizeMeters":[2.992,4.304,6.81],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:52.247Z","updatedAt":"2026-09-06T15:03:52.997Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11367/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PressurisedLongRangeRoverLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11367/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11367/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11367/v1/model.glb\" alt=\"Pressurised long range rover (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11367/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11367/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11368","slug":"lunar-surface-colony-and-rovers-small-survey-rover-bd425a9a","title":"Small robotic survey rover (Lunar Surface Colony and Rovers)","summary":"A 1.6 m six-wheel robotic survey rover on a rocker bogie suspension with named rocker and bogie arms, a deck-mounted photovoltaic panel, a stereo camera mast, a small sampling arm and a low gain antenna.","description":"A 1.6 m six-wheel robotic survey rover on a rocker bogie suspension with named rocker and bogie arms, a deck-mounted photovoltaic panel, a stereo camera mast, a small sampling arm and a low gain antenna. Bounding size 1.20 x 1.69 x 2.19 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-front-right, wheel-mid-right, wheel-rear-right, steer-front-right, rocker-right, bogie-right, wheel-front-left, wheel-mid-left, wheel-rear-left, steer-front-left, rocker-left, bogie-left, mast-head, arm-sampling. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-small-survey-rover-bd425a9a","cdnUrl":"https://cdn.3dassets.dev/assets/11368/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-small-survey-rover-bd425a9a","thumbnailUrl":"https://cdn.3dassets.dev/assets/11368/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11368/v1/poster.webp","blurhash":"U8A,zjxZ00Iq9EoIM|XA00Rj%M%M_4NH%LxV","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":130696,"triangles":6088,"vertices":18264,"meshes":23,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.600008561489727,-1.19209286886246e-9,-1.0599999713897705],"max":[0.600008561489727,1.6850022061254326,1.1299999952316284]},"sizeMeters":[1.2,1.685,2.19],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:52.871Z","updatedAt":"2026-09-06T15:03:53.859Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11368/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SmallRoboticSurveyRoverLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11368/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11368/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11368/v1/model.glb\" alt=\"Small robotic survey rover (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11368/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11368/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11369","slug":"lunar-surface-colony-and-rovers-cargo-hauler-flatbed-1ee62cb2","title":"Six-wheel cargo hauler with flatbed (Lunar Surface Colony and Rovers)","summary":"A 7 m six-wheel surface hauler: an open forward control station with a roll frame over a bogie chassis on wire-mesh wheels, a ribbed flatbed with stake pockets and tie-down rails, a stores container and a hinged tail ramp on a named node.","description":"A 7 m six-wheel surface hauler: an open forward control station with a roll frame over a bogie chassis on wire-mesh wheels, a ribbed flatbed with stake pockets and tie-down rails, a stores container and a hinged tail ramp on a named node. Bounding size 2.68 x 3.06 x 7.56 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-front-right, wheel-mid-right, wheel-rear-right, steer-front-right, bogie-right, wheel-front-left, wheel-mid-left, wheel-rear-left, steer-front-left, bogie-left, ramp. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-cargo-hauler-flatbed-1ee62cb2","cdnUrl":"https://cdn.3dassets.dev/assets/11369/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-cargo-hauler-flatbed-1ee62cb2","thumbnailUrl":"https://cdn.3dassets.dev/assets/11369/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11369/v1/poster.webp","blurhash":"U8Bpqd%N00xu%fD%9F%M00Ri~qWC9F?b_3ax","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":242192,"triangles":8160,"vertices":24480,"meshes":22,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.3398579363383893,1.907348634588857e-8,-4.65656128828514],"max":[1.3398579363383893,3.062707171863198,2.9000000953674316]},"sizeMeters":[2.68,3.063,7.557],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:53.083Z","updatedAt":"2026-09-06T15:03:53.961Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11369/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SixWheelCargoHaulerWithFlatbedLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11369/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11369/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11369/v1/model.glb\" alt=\"Six-wheel cargo hauler with flatbed (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11369/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11369/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11370","slug":"lunar-surface-colony-and-rovers-cargo-hauler-tanker-599de53d","title":"Six-wheel cargo hauler with cryogenic tank (Lunar Surface Colony and Rovers)","summary":"The same six-wheel hauler chassis carrying a 4.8 m cryogenic vessel in three saddle cradles, with a pump skid, a transfer boom and a coupling head instead of the flatbed.","description":"The same six-wheel hauler chassis carrying a 4.8 m cryogenic vessel in three saddle cradles, with a pump skid, a transfer boom and a coupling head instead of the flatbed. Bounding size 2.68 x 3.32 x 6.20 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-front-right, wheel-mid-right, wheel-rear-right, steer-front-right, bogie-right, wheel-front-left, wheel-mid-left, wheel-rear-left, steer-front-left, bogie-left. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-cargo-hauler-tanker-599de53d","cdnUrl":"https://cdn.3dassets.dev/assets/11370/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-cargo-hauler-tanker-599de53d","thumbnailUrl":"https://cdn.3dassets.dev/assets/11370/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11370/v1/poster.webp","blurhash":"U8DS?%IU00-=~q009F_300M|~Ws:01-;_3bH","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":263732,"triangles":8620,"vertices":25860,"meshes":21,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.3401135391619592,1.907348634588857e-8,-3.299999952316284],"max":[1.3401135391619592,3.320018514026258,2.9000000953674316]},"sizeMeters":[2.68,3.32,6.2],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:53.218Z","updatedAt":"2026-09-06T15:03:54.194Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11370/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SixWheelCargoHaulerWithCryogenicTankLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11370/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11370/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11370/v1/model.glb\" alt=\"Six-wheel cargo hauler with cryogenic tank (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11370/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11370/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11371","slug":"lunar-surface-colony-and-rovers-crane-rover-cf18e715","title":"Four-wheel crane rover (Lunar Surface Colony and Rovers)","summary":"A 4.6 m four-wheel lifting rover: a slewing turntable and counterweight on a wheeled chassis with all-wheel steering, four extending outriggers with screw jacks and bearing pads, an operator cab and a two-stage telescopic boom with a hook block, every joint a named node.","description":"A 4.6 m four-wheel lifting rover: a slewing turntable and counterweight on a wheeled chassis with all-wheel steering, four extending outriggers with screw jacks and bearing pads, an operator cab and a two-stage telescopic boom with a hook block, every joint a named node. Bounding size 3.96 x 4.59 x 5.85 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-front-right, steer-front-right, wheel-rear-right, steer-rear-right, outrigger-front-right, outrigger-rear-right, wheel-front-left, steer-front-left, wheel-rear-left, steer-rear-left, outrigger-front-left, outrigger-rear-left, turret, boom, boom-extension, hook. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-crane-rover-cf18e715","cdnUrl":"https://cdn.3dassets.dev/assets/11371/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-crane-rover-cf18e715","thumbnailUrl":"https://cdn.3dassets.dev/assets/11371/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11371/v1/poster.webp","blurhash":"U79@O}Rj00M{4mWBxvt700%M~WRj?wayxWRP","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":193164,"triangles":6250,"vertices":18750,"meshes":25,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.9799999952316285,-5.551115123125783e-17,-2.2310216426849365],"max":[1.9799999952316285,4.594446095772062,3.619991974922016]},"sizeMeters":[3.96,4.594,5.851],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:53.424Z","updatedAt":"2026-09-06T15:03:54.264Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11371/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FourWheelCraneRoverLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11371/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11371/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11371/v1/model.glb\" alt=\"Four-wheel crane rover (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11371/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11371/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11372","slug":"lunar-surface-colony-and-rovers-eva-suit-e598023a","title":"Surface EVA suit (Lunar Surface Colony and Rovers)","summary":"A 1.95 m surface extravehicular suit standing on the regolith: a hard upper torso on a hip bearing, jointed arms and legs on named nodes, a bubble helmet with a gold sun visor, a life support backpack with a valve panel and comms whip, and dust-stained overboots.","description":"A 1.95 m surface extravehicular suit standing on the regolith: a hard upper torso on a hip bearing, jointed arms and legs on named nodes, a bubble helmet with a gold sun visor, a life support backpack with a valve panel and comms whip, and dust-stained overboots. Bounding size 1.04 x 2.00 x 0.91 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: arm-left, leg-left, arm-right, leg-right. A suit shell only; there is no figure inside and no skeleton or rig. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-eva-suit-e598023a","cdnUrl":"https://cdn.3dassets.dev/assets/11372/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-eva-suit-e598023a","thumbnailUrl":"https://cdn.3dassets.dev/assets/11372/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11372/v1/poster.webp","blurhash":"U8BDTe%2009a?bV@IUxv00Rj~qt800og?aM{","category":{"slug":"characters","title":"Characters & Creatures"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":95588,"triangles":1830,"vertices":5490,"meshes":11,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-0.5200139895352445,0.000007475970598483372,-0.5400000214576721],"max":[0.5199955242897863,2.0016515254974365,0.3691168765082083]},"sizeMeters":[1.04,2.002,0.909],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:54.313Z","updatedAt":"2026-09-06T15:03:55.210Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11372/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurfaceEVASuitLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11372/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11372/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11372/v1/model.glb\" alt=\"Surface EVA suit (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11372/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11372/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11373","slug":"lunar-surface-colony-and-rovers-eva-tool-cart-6438ab0b","title":"EVA tool cart (Lunar Surface Colony and Rovers)","summary":"A 2 m two-wheel hand barrow for suited crew: a tubular frame on wire-mesh wheels with a folding ground stand, an inclined load deck, a lidded stores box, an open sample tray and a rack of four stowed hand tools behind a padded push bar.","description":"A 2 m two-wheel hand barrow for suited crew: a tubular frame on wire-mesh wheels with a folding ground stand, an inclined load deck, a lidded stores box, an open sample tray and a rack of four stowed hand tools behind a padded push bar. Bounding size 0.98 x 1.11 x 1.66 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: wheel-left, wheel-right. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-eva-tool-cart-6438ab0b","cdnUrl":"https://cdn.3dassets.dev/assets/11373/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-eva-tool-cart-6438ab0b","thumbnailUrl":"https://cdn.3dassets.dev/assets/11373/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11373/v1/poster.webp","blurhash":"U6Bf%=~V0Ktm^ED$o~xt0002NK?CFiNiR.^#","category":{"slug":"weapons-tools","title":"Weapons & Tools"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":122452,"triangles":2436,"vertices":7308,"meshes":8,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.49000213473099363,7.152557379708213e-9,-0.8999999761581421],"max":[0.49000213473099363,1.1149685644721818,0.7599999928474426]},"sizeMeters":[0.98,1.115,1.66],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:54.495Z","updatedAt":"2026-09-06T15:03:55.350Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11373/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function EVAToolCartLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11373/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11373/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11373/v1/model.glb\" alt=\"EVA tool cart (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11373/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11373/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11374","slug":"lunar-surface-colony-and-rovers-equipment-sled-7dfd0ff6","title":"Hand pulled equipment sled (Lunar Surface Colony and Rovers)","summary":"A 2.9 m hand-pulled sled for short traverses: two curved skid runners bridged by a load deck, two strapped stores boxes, a soft sample bag and a rigid tow bar on a named node.","description":"A 2.9 m hand-pulled sled for short traverses: two curved skid runners bridged by a load deck, two strapped stores boxes, a soft sample bag and a rigid tow bar on a named node. Bounding size 1.05 x 0.90 x 3.09 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: tow-bar. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-equipment-sled-7dfd0ff6","cdnUrl":"https://cdn.3dassets.dev/assets/11374/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-equipment-sled-7dfd0ff6","thumbnailUrl":"https://cdn.3dassets.dev/assets/11374/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11374/v1/poster.webp","blurhash":"UBBz5-RN00xu~qIUD*%L00I[_3xu00-:?aIp","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":29512,"triangles":520,"vertices":1560,"meshes":6,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.5249621956357223,0.000020287083972642117,-1.149999976158142],"max":[0.5249621956357223,0.8950051790074383,1.9400108172715214]},"sizeMeters":[1.05,0.895,3.09],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:54.521Z","updatedAt":"2026-09-06T15:03:55.477Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11374/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function HandPulledEquipmentSledLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11374/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11374/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11374/v1/model.glb\" alt=\"Hand pulled equipment sled (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11374/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11374/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11375","slug":"lunar-surface-colony-and-rovers-regolith-ground-tile-6f9b33d2","title":"Regolith ground tile (Lunar Surface Colony and Rovers)","summary":"A 12 m square regolith ground tile: rolling mare relief with four impact craters between 1.2 and 4.4 m across, feathered to a common rim height on all four edges so tiles butt together in any orientation.","description":"A 12 m square regolith ground tile: rolling mare relief with four impact craters between 1.2 and 4.4 m across, feathered to a common rim height on all four edges so tiles butt together in any orientation. Bounding size 12.00 x 1.95 x 12.00 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Tiles share a 0.35 m rim height, so a field of them lies flat. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-regolith-ground-tile-6f9b33d2","cdnUrl":"https://cdn.3dassets.dev/assets/11375/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-regolith-ground-tile-6f9b33d2","thumbnailUrl":"https://cdn.3dassets.dev/assets/11375/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11375/v1/poster.webp","blurhash":"U4CP-M?v00RPozRjo1t700D%~qWBIAxuofM{","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":65632,"triangles":1346,"vertices":4038,"meshes":1,"materials":1,"textures":0,"animations":[],"boundingBox":{"min":[-6,0.00034002868730520497,-6],"max":[6,1.9545012274543574,6]},"sizeMeters":[12,1.954,12],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:54.743Z","updatedAt":"2026-09-06T15:03:55.556Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11375/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RegolithGroundTileLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11375/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11375/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11375/v1/model.glb\" alt=\"Regolith ground tile (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11375/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11375/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11376","slug":"lunar-surface-colony-and-rovers-crater-rim-segment-9faf8d00","title":"Crater rim segment tile (Lunar Surface Colony and Rovers)","summary":"A 12 m square tile dominated by the rim and inner wall of a 10.8 m crater: a raised crest, a bowl falling away inside it and blocky ejecta scattered along the crest.","description":"A 12 m square tile dominated by the rim and inner wall of a 10.8 m crater: a raised crest, a bowl falling away inside it and blocky ejecta scattered along the crest. Bounding size 12.00 x 2.94 x 12.00 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-crater-rim-segment-9faf8d00","cdnUrl":"https://cdn.3dassets.dev/assets/11376/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-crater-rim-segment-9faf8d00","thumbnailUrl":"https://cdn.3dassets.dev/assets/11376/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11376/v1/poster.webp","blurhash":"U5CsdQ_200Rjt8RjM{xu009Z~qNGM_xv%MIU","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":88956,"triangles":1832,"vertices":5496,"meshes":1,"materials":1,"textures":0,"animations":[],"boundingBox":{"min":[-6,0.00010255587149377021,-6],"max":[6,2.943063461660855,6]},"sizeMeters":[12,2.943,12],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:55.489Z","updatedAt":"2026-09-06T15:03:56.427Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11376/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CraterRimSegmentTileLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11376/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11376/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11376/v1/model.glb\" alt=\"Crater rim segment tile (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11376/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11376/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11377","slug":"lunar-surface-colony-and-rovers-boulder-field-tile-37a122dc","title":"Boulder field tile (Lunar Surface Colony and Rovers)","summary":"A 12 m square tile strewn with eleven weathered boulders between 0.6 and 2.1 m across, sitting part buried in rolling regolith around a shallow crater.","description":"A 12 m square tile strewn with eleven weathered boulders between 0.6 and 2.1 m across, sitting part buried in rolling regolith around a shallow crater. Bounding size 12.00 x 2.09 x 12.00 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-boulder-field-tile-37a122dc","cdnUrl":"https://cdn.3dassets.dev/assets/11377/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-boulder-field-tile-37a122dc","thumbnailUrl":"https://cdn.3dassets.dev/assets/11377/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11377/v1/poster.webp","blurhash":"U6B|EG-;00M{RkR%axs;00My~pj?obxbt7Rj","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":113144,"triangles":2336,"vertices":7008,"meshes":1,"materials":1,"textures":0,"animations":[],"boundingBox":{"min":[-6,-0.00010876454828823157,-6],"max":[6,2.0888221720647677,6]},"sizeMeters":[12,2.089,12],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:55.445Z","updatedAt":"2026-09-06T15:03:56.459Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11377/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function BoulderFieldTileLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11377/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11377/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11377/v1/model.glb\" alt=\"Boulder field tile (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11377/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11377/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11378","slug":"lunar-surface-colony-and-rovers-rille-edge-tile-549fb014","title":"Rille edge tile (Lunar Surface Colony and Rovers)","summary":"A 12 m square tile carrying the edge of a collapsed lava channel: a 6.8 m wide rille cut 2.3 m below the plain with slumped banks either side, feathered across its width only so the channel runs straight through into the next tile.","description":"A 12 m square tile carrying the edge of a collapsed lava channel: a 6.8 m wide rille cut 2.3 m below the plain with slumped banks either side, feathered across its width only so the channel runs straight through into the next tile. Bounding size 12.00 x 3.42 x 12.00 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Tiles join along their Z edges to extend the channel. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-rille-edge-tile-549fb014","cdnUrl":"https://cdn.3dassets.dev/assets/11378/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-rille-edge-tile-549fb014","thumbnailUrl":"https://cdn.3dassets.dev/assets/11378/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11378/v1/poster.webp","blurhash":"U5C?lu~q009G%MWBNFa$009Y?bj=D%xtt7WA","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":75976,"triangles":1562,"vertices":4686,"meshes":1,"materials":1,"textures":0,"animations":[],"boundingBox":{"min":[-6,0.0002859013996012738,-6],"max":[6,3.419701777128231,6]},"sizeMeters":[12,3.419,12],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:55.665Z","updatedAt":"2026-09-06T15:03:56.688Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11378/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RilleEdgeTileLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11378/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11378/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11378/v1/model.glb\" alt=\"Rille edge tile (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11378/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11378/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11379","slug":"lunar-surface-colony-and-rovers-rover-track-ruts-tile-46b520db","title":"Rover track ruts tile (Lunar Surface Colony and Rovers)","summary":"A 12 m square tile of trafficked regolith: a pair of 1.5 m gauge rover ruts with chevron grouser prints pressed along them, spoil ridges either side and a line of boot prints alongside.","description":"A 12 m square tile of trafficked regolith: a pair of 1.5 m gauge rover ruts with chevron grouser prints pressed along them, spoil ridges either side and a line of boot prints alongside. Bounding size 12.00 x 1.31 x 12.00 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Tiles join along their Z edges to extend the track. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-rover-track-ruts-tile-46b520db","cdnUrl":"https://cdn.3dassets.dev/assets/11379/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-rover-track-ruts-tile-46b520db","thumbnailUrl":"https://cdn.3dassets.dev/assets/11379/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11379/v1/poster.webp","blurhash":"U6B|HO%M00WB?bRjM{t700M{~pRk4Ux]xuMx","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":129572,"triangles":2678,"vertices":8034,"meshes":1,"materials":1,"textures":0,"animations":[],"boundingBox":{"min":[-6,-0.00025371523158401743,-6],"max":[6,1.3108214518572554,6]},"sizeMeters":[12,1.311,12],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:55.931Z","updatedAt":"2026-09-06T15:03:56.839Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11379/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RoverTrackRutsTileLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11379/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11379/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11379/v1/model.glb\" alt=\"Rover track ruts tile (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11379/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11379/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11380","slug":"lunar-surface-colony-and-rovers-dust-berm-b5ad8bfb","title":"Graded dust berm (Lunar Surface Colony and Rovers)","summary":"A 10 m graded regolith berm pushed up to shield a work area from rover dust: a tapered bank with a compacted apron, a spoil line along its toe and a marker post at each end.","description":"A 10 m graded regolith berm pushed up to shield a work area from rover dust: a tapered bank with a compacted apron, a spoil line along its toe and a marker post at each end. Bounding size 10.40 x 1.93 x 5.34 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-dust-berm-b5ad8bfb","cdnUrl":"https://cdn.3dassets.dev/assets/11380/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-dust-berm-b5ad8bfb","thumbnailUrl":"https://cdn.3dassets.dev/assets/11380/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11380/v1/poster.webp","blurhash":"U8Bf^T^+00xtIU%2%LM{009F~qWB%gD*D*%M","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":88176,"triangles":1800,"vertices":5400,"meshes":3,"materials":3,"textures":0,"animations":[],"boundingBox":{"min":[-5.199999809265137,-0.00009788245951336538,-2.641771068312365],"max":[5.199999809265137,1.9334571477869669,2.699944486357409]},"sizeMeters":[10.4,1.934,5.342],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:57.279Z","updatedAt":"2026-09-06T15:03:57.748Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11380/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function GradedDustBermLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11380/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11380/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11380/v1/model.glb\" alt=\"Graded dust berm (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11380/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11380/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11381","slug":"lunar-surface-colony-and-rovers-survey-marker-array-04082b47","title":"Survey marker array (Lunar Surface Colony and Rovers)","summary":"A 2.4 m survey station: three graduated range poles with black and white targets on ballasted bases, a corner cube retroreflector on a levelling tripod and a photometric gnomon with a calibration strip on a base plate.","description":"A 2.4 m survey station: three graduated range poles with black and white targets on ballasted bases, a corner cube retroreflector on a levelling tripod and a photometric gnomon with a calibration strip on a base plate. Bounding size 2.63 x 1.80 x 1.88 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-survey-marker-array-04082b47","cdnUrl":"https://cdn.3dassets.dev/assets/11381/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-survey-marker-array-04082b47","thumbnailUrl":"https://cdn.3dassets.dev/assets/11381/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11381/v1/poster.webp","blurhash":"UCBf|bxu00oI00M{x]oe00NGt8s:~q%MjXRj","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":42416,"triangles":768,"vertices":2304,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-1.2000000476837158,-0.00008312157305878642,-0.8999542579967538],"max":[1.4252668619155884,1.8000125750412947,0.9823560743771828]},"sizeMeters":[2.625,1.8,1.882],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:57.075Z","updatedAt":"2026-09-06T15:03:57.896Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11381/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurveyMarkerArrayLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11381/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11381/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11381/v1/model.glb\" alt=\"Survey marker array (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11381/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11381/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11382","slug":"lunar-surface-colony-and-rovers-comms-relay-mast-79ba91ac","title":"Communications relay mast (Lunar Surface Colony and Rovers)","summary":"A 9.5 m guyed lattice relay mast on four ballasted footings: eight braced bays, three guy wires to anchor blocks, a 2.1 m steerable dish on a yoke as a named node, three whip antennas, a photovoltaic panel and a ground equipment box.","description":"A 9.5 m guyed lattice relay mast on four ballasted footings: eight braced bays, three guy wires to anchor blocks, a 2.1 m steerable dish on a yoke as a named node, three whip antennas, a photovoltaic panel and a ground equipment box. Bounding size 8.40 x 9.99 x 7.38 m (X x Y x Z). Metre units, +Y up, +Z forward, resting on the ground at y=0. Movable parts are separate named nodes with local pivots: dish. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-comms-relay-mast-79ba91ac","cdnUrl":"https://cdn.3dassets.dev/assets/11382/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-comms-relay-mast-79ba91ac","thumbnailUrl":"https://cdn.3dassets.dev/assets/11382/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11382/v1/poster.webp","blurhash":"U26a-d_3009G00IU-;WE00of_Nay_NogM_-:","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":113292,"triangles":2250,"vertices":6750,"meshes":7,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-4.153138637542725,0,-4.656867410937478],"max":[4.248558044433594,9.985027040289607,2.7181746027862332]},"sizeMeters":[8.402,9.985,7.375],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:58.218Z","updatedAt":"2026-09-06T15:03:59.186Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11382/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CommunicationsRelayMastLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11382/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11382/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11382/v1/model.glb\" alt=\"Communications relay mast (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11382/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11382/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11383","slug":"lunar-surface-colony-and-rovers-colony-o-c65a5af3-starter-scene","title":"Lunar Colony Overview (Lunar Surface Colony and Rovers)","summary":"Composed example for Lunar Surface Colony and Rovers.","description":"A working surface base: two tunnel junctions link a crew habitat, an inflatable dome, an observation turret, a greenhouse, a medical module, a regolith shielded habitat, an airlock and a vehicle workshop, every mate made through the hab-port interface 2.4 m above the regolith. A photovoltaic row, a tracking row, a solar tower, a radiator bank, a battery container and a shielded reactor stand clear to the west, an excavator works the south end of the site, and an open rover, a pressurised traverse rover, a suited crew member with an equipment sled and a survey station occupy the approach. Layout artifact composed from instances of this pack; static geometry only.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-colony-o-c65a5af3-starter-scene","cdnUrl":"https://cdn.3dassets.dev/assets/11383/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-colony-o-c65a5af3-starter-scene","thumbnailUrl":"https://cdn.3dassets.dev/assets/11383/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11383/v1/poster.webp","blurhash":"U88gy,t800xuM{Rjofof00Rj~qRQ-;xuRjRj","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":2615968,"triangles":71260,"vertices":154328,"meshes":192,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-20.90000009536743,-0.0002447162872303288,-26.864110327525147],"max":[24.59999990463257,9.985027040289607,27.26306244687929]},"sizeMeters":[45.5,9.985,54.127],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:58.576Z","updatedAt":"2026-09-06T15:03:59.434Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11383/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function LunarColonyOverviewLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11383/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11383/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11383/v1/model.glb\" alt=\"Lunar Colony Overview (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11383/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11383/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11386","slug":"lunar-surface-colony-and-rovers-landing-pad-operations-4eaaa443","title":"Landing Pad Operations (Lunar Surface Colony and Rovers)","summary":"Composed example for Lunar Surface Colony and Rovers.","description":"A cargo lander standing on the sintered pad on its four crushable footpads, ringed by two blast deflector walls and two regolith berm segments mated to the pad rim markers. A crew lander waits on the apron, a cryogenic tank farm, a transfer arm and a battery container sit upwind, three approach beacons mark the corridor, and a hauler, tanker, crane rover, open rover and suited crew work the offload. Layout artifact; no animation or landing logic.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-landing-pad-operations-4eaaa443","cdnUrl":"https://cdn.3dassets.dev/assets/11386/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-landing-pad-operations-4eaaa443","thumbnailUrl":"https://cdn.3dassets.dev/assets/11386/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11386/v1/poster.webp","blurhash":"U78;V:xu00RiM_ozt7Rj00M{~poz-qM{Rixv","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":1656288,"triangles":46738,"vertices":102602,"meshes":151,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-21.153138637542725,-0.00019836756415402002,-17.499412866663327],"max":[22.47530376275,9.985027040289607,18.08127798864256]},"sizeMeters":[43.628,9.985,35.581],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:59.863Z","updatedAt":"2026-09-06T15:04:00.752Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11386/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function LandingPadOperationsLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11386/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11386/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11386/v1/model.glb\" alt=\"Landing Pad Operations (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11386/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11386/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11388","slug":"lunar-surface-colony-and-rovers-connector-cases-e58e7fe0","title":"Connector Cases (Lunar Surface Colony and Rovers)","summary":"Composed example for Lunar Surface Colony and Rovers.","description":"Independent test assemblies covering both connector families. Every habitat, tunnel, junction, elbow, greenhouse, workshop, turret and airlock in the pack is mated through a hab-port, and both landers, both blast deflectors and both berm types are mated to landing pad markers. Every pair carries a checked connection assertion; the runner rejects the pack if any mate is out by more than a millimetre.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-connector-cases-e58e7fe0","cdnUrl":"https://cdn.3dassets.dev/assets/11388/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-connector-cases-e58e7fe0","thumbnailUrl":"https://cdn.3dassets.dev/assets/11388/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11388/v1/poster.webp","blurhash":"U697eKs:00tRRkRjt6t700R*~qM{xs%MNGM{","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":2377592,"triangles":56196,"vertices":124197,"meshes":96,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-22.8400000333786,-0.0002447162872303288,-36.22268342971802],"max":[38.82078313827515,7.599999904632568,35.23167422162852]},"sizeMeters":[61.661,7.6,71.454],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:04:00.275Z","updatedAt":"2026-09-06T15:04:00.630Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11388/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ConnectorCasesLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11388/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11388/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11388/v1/model.glb\" alt=\"Connector Cases (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11388/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11388/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"11385","slug":"lunar-surface-colony-and-rovers-resource-yard-26eb8d25","title":"Resource and Power Yard (Lunar Surface Colony and Rovers)","summary":"Composed example for Lunar Surface Colony and Rovers.","description":"The extraction and utilities end of the base: an excavator feeding a hopper and screening deck, an oxygen extraction plant, a water processing skid and a sintering print gantry laying a regolith wall, backed by a fixed and a tracking photovoltaic row, a solar tower, a radiator bank, a battery container and a shielded reactor. A tanker, crane rover and survey rover work the yard, and a field of terrain tiles shows the kit joining edge to edge with a rille running straight through. Layout artifact; static geometry only.","status":"published","url":"https://3dassets.dev/assets/lunar-surface-colony-and-rovers-resource-yard-26eb8d25","cdnUrl":"https://cdn.3dassets.dev/assets/11385/v1/model.glb","downloadUrl":"https://3dassets.dev/download/lunar-surface-colony-and-rovers-resource-yard-26eb8d25","thumbnailUrl":"https://cdn.3dassets.dev/assets/11385/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/11385/v1/poster.webp","blurhash":"U39jo+_300?bE1IUt6xa004n~qD%~V?bM|Io","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"realistic","title":"Realistic"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":1813688,"triangles":54462,"vertices":118519,"meshes":182,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-24.199999809265137,-0.000231580294480338,-20.65866733702079],"max":[22.90000009536743,9.020000457763672,36]},"sizeMeters":[47.1,9.02,56.659],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5","downloads":0,"publishedAt":"2026-09-06T15:03:59.099Z","updatedAt":"2026-09-06T15:03:59.607Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/11385/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ResourceAndPowerYardLunarSurfaceColonyAndRovers(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/11385/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/11385/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/11385/v1/model.glb\" alt=\"Resource and Power Yard (Lunar Surface Colony and Rovers)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/11385/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/11385/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}}]}}