{"data":{"id":363,"slug":"beach-surf-and-paddle-kit","title":"Beach Surf and Paddle Kit","summary":"51 standard fidelity surf, paddle and beach day assets: rockered boards with rails, fins and pads, kayak, jet ski, lifeguard tower, hire hut, stocked racks, umbrellas, chairs, flags, buoys and beach props.","description":"A surf beach cove kit at the standard tier: four surfboards with lofted rails, rocker, stringers, pads and fins, three paddleboards, a sit-on-top kayak with paddles, a jet ski, bodyboard and skimboard, plus a lifeguard tower, hire hut, shower, stocked and empty board racks, changing tent, shade shelter, umbrella, folding chair, flags, buoys, dune fencing and beach day props on a shoreline terrain. Static self-contained CC0 geometry with modelled fittings and seams; standing boards rest tail down, paddleboards lie deck up. No water physics, gameplay logic or animation.","url":"https://3dassets.dev/packs/beach-surf-and-paddle-kit","coverUrl":"https://cdn.3dassets.dev/assets/39465/v1/poster.webp","assetCount":52,"aiGenerated":true,"aiGeneratedAssetCount":52,"aiModels":["Claude Opus 5.5"],"aiModelUnspecifiedCount":0,"featured":true,"licenseLabel":"CC0 1.0 Universal","totalBytes":8437132,"totalTriangles":412654,"starterScene":{"id":"39465","slug":"beach-surf-and-paddle-kit-surf-beach-cov-c569902d-starter-scene","title":"Surf Beach Cove (Beach Surf and Paddle Kit)","summary":"A busy surf beach cove: lifeguard tower and patrol flags, a hire hut with stocked board racks, shower and changing tents, sunbathers under umbrellas with towels, chairs and coolers, a volleyball court and sand castle, and paddleboards, a kayak and a jet ski inside the buoyed...","description":"A busy surf beach cove: lifeguard tower and patrol flags, a hire hut with stocked board racks, shower and changing tents, sunbathers under umbrellas with towels, chairs and coolers, a volleyball court and sand castle, and paddleboards, a kayak and a jet ski inside the buoyed swim zone.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-surf-beach-cov-c569902d-starter-scene","cdnUrl":"https://cdn.3dassets.dev/assets/39465/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-surf-beach-cov-c569902d-starter-scene","thumbnailUrl":"https://cdn.3dassets.dev/assets/39465/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39465/v1/poster.webp","blurhash":"UACZeHtl00ovH?%2tSM|00R4~Vb0?^9tVr-U","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":4127016,"triangles":208396,"vertices":182135,"meshes":248,"materials":13,"textures":0,"animations":[],"boundingBox":{"min":[-17.200000762939453,-0.065,-11.689229214031723],"max":[16.979999542236328,6.477625179290771,11.000959598858383]},"sizeMeters":[34.18,6.543,22.69],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_materials_transmission","KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":58,"publishedAt":"2026-09-23T15:10:50.424Z","updatedAt":"2026-10-03T09:56:21.778Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39465/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurfBeachCoveBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39465/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39465/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39465/v1/model.glb\" alt=\"Surf Beach Cove (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39465/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39465/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},"assets":[{"id":"39418","slug":"beach-surf-and-paddle-kit-shortboard-surfboard-e04e5df0","title":"Shortboard Surfboard (Beach Surf and Paddle Kit)","summary":"1.9 m three fin shortboard standing tail down: rockered foam blank with domed deck and soft rails, timber stringer, kicked and arched tail pad, leash plug, nose stripes and thruster fins in boxes.","description":"1.9 m three fin shortboard standing tail down: rockered foam blank with domed deck and soft rails, timber stringer, kicked and arched tail pad, leash plug, nose stripes and thruster fins in boxes. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-shortboard-surfboard-e04e5df0","cdnUrl":"https://cdn.3dassets.dev/assets/39418/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-shortboard-surfboard-e04e5df0","thumbnailUrl":"https://cdn.3dassets.dev/assets/39418/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39418/v1/poster.webp","blurhash":"U8A,zkxv009F%Mt7IoM{00WB~qt7D%WB-:t7","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":66756,"triangles":3672,"vertices":2402,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-0.24484236882618962,0,-0.11445770077376663],"max":[0.24484236882618962,1.899999976158142,0.1544303032332685]},"sizeMeters":[0.49,1.9,0.269],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":11,"publishedAt":"2026-09-23T15:10:31.631Z","updatedAt":"2026-10-03T05:37:12.882Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39418/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ShortboardSurfboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39418/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39418/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39418/v1/model.glb\" alt=\"Shortboard Surfboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39418/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39418/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39414","slug":"beach-surf-and-paddle-kit-longboard-surfboard-d5d87547","title":"Longboard Surfboard (Beach Surf and Paddle Kit)","summary":"2.75 m single fin longboard standing tail down: round nose, flat rocker, triple stringer, nose band, small kick pad, leash plug and a long box fin.","description":"2.75 m single fin longboard standing tail down: round nose, flat rocker, triple stringer, nose band, small kick pad, leash plug and a long box fin. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-longboard-surfboard-d5d87547","cdnUrl":"https://cdn.3dassets.dev/assets/39414/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-longboard-surfboard-d5d87547","thumbnailUrl":"https://cdn.3dassets.dev/assets/39414/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39414/v1/poster.webp","blurhash":"U8BDGz-o000MxZofRkNG04WC~St6RnWCs,t5","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":67032,"triangles":3948,"vertices":2372,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-0.2900479140598773,0,-0.2214005172930704],"max":[0.2900479140598773,2.75,0.14821244179190074]},"sizeMeters":[0.58,2.75,0.37],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:31.529Z","updatedAt":"2026-10-03T05:40:12.837Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39414/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function LongboardSurfboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39414/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39414/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39414/v1/model.glb\" alt=\"Longboard Surfboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39414/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39414/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39419","slug":"beach-surf-and-paddle-kit-fish-surfboard-a30d6ea5","title":"Fish Surfboard (Beach Surf and Paddle Kit)","summary":"1.7 m swallow tail fish standing tail down: wide flat planform, split tail pads, twin keel fins, stringer, leash plug and deck stripes.","description":"1.7 m swallow tail fish standing tail down: wide flat planform, split tail pads, twin keel fins, stringer, leash plug and deck stripes. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-fish-surfboard-a30d6ea5","cdnUrl":"https://cdn.3dassets.dev/assets/39419/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-fish-surfboard-a30d6ea5","thumbnailUrl":"https://cdn.3dassets.dev/assets/39419/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39419/v1/poster.webp","blurhash":"U55Z8dyD00D4Orbvv~n4D4a0*Jk=R6WBtRt7","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":61304,"triangles":3504,"vertices":2181,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-0.2799679636336786,0,-0.1365229890705934],"max":[0.2799679636336786,1.8200000524520874,0.10441367887247575]},"sizeMeters":[0.56,1.82,0.241],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":7,"publishedAt":"2026-09-23T15:10:31.690Z","updatedAt":"2026-10-03T05:41:06.352Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39419/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FishSurfboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39419/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39419/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39419/v1/model.glb\" alt=\"Fish Surfboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39419/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39419/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39417","slug":"beach-surf-and-paddle-kit-foamie-soft-surfboard-7c40f166","title":"Foamie Soft Surfboard (Beach Surf and Paddle Kit)","summary":"2.1 m soft top learner surfboard standing tail down: foam deck skin over a coral slick, printed stringer, two deck bands, leash plug and three soft fins.","description":"2.1 m soft top learner surfboard standing tail down: foam deck skin over a coral slick, printed stringer, two deck bands, leash plug and three soft fins. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-foamie-soft-surfboard-7c40f166","cdnUrl":"https://cdn.3dassets.dev/assets/39417/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-foamie-soft-surfboard-7c40f166","thumbnailUrl":"https://cdn.3dassets.dev/assets/39417/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39417/v1/poster.webp","blurhash":"U7C6iY?b0000jYofbbNH00M{_N%NNdWBs9oz","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":61212,"triangles":3284,"vertices":2252,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-0.28997007869228353,0,-0.1313923693212557],"max":[0.28997007869228353,2.0999999046325684,0.12189295206015566]},"sizeMeters":[0.58,2.1,0.253],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:31.567Z","updatedAt":"2026-10-02T13:24:08.649Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39417/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FoamieSoftSurfboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39417/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39417/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39417/v1/model.glb\" alt=\"Foamie Soft Surfboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39417/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39417/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39421","slug":"beach-surf-and-paddle-kit-touring-stand-up-paddleboard-74083241","title":"Touring Stand Up Paddleboard (Beach Surf and Paddle Kit)","summary":"3.2 m touring stand-up paddleboard lying deck up: pointed displacement nose, grooved deck pad with kick, recessed carry strap, bungee net on four D-rings, leash ring and a long touring fin.","description":"3.2 m touring stand-up paddleboard lying deck up: pointed displacement nose, grooved deck pad with kick, recessed carry strap, bungee net on four D-rings, leash ring and a long touring fin. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-touring-stand-up-paddleboard-74083241","cdnUrl":"https://cdn.3dassets.dev/assets/39421/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-touring-stand-up-paddleboard-74083241","thumbnailUrl":"https://cdn.3dassets.dev/assets/39421/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39421/v1/poster.webp","blurhash":"U78}Sqi^8wS~.SDiiwx^00IU?^%2D4_Nl9H?","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":106124,"triangles":6152,"vertices":4033,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.3898556532594804,0.000010678437146360853,-1.600000023841858],"max":[0.3898556532594804,0.392293481485875,1.600000023841858]},"sizeMeters":[0.78,0.392,3.2],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":10,"publishedAt":"2026-09-23T15:10:31.778Z","updatedAt":"2026-10-03T05:39:56.868Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39421/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function TouringStandUpPaddleboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39421/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39421/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39421/v1/model.glb\" alt=\"Touring Stand Up Paddleboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39421/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39421/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39416","slug":"beach-surf-and-paddle-kit-inflatable-stand-up-paddlebo-16e3ae20","title":"Inflatable Stand Up Paddleboard (Beach Surf and Paddle Kit)","summary":"3.0 m inflatable stand-up paddleboard lying deck up: boxy drop stitch rails with seam tape, grooved deck pad and kick, carry strap, bungee on D-rings, inflation valve, leash ring, centre fin and two side fins.","description":"3.0 m inflatable stand-up paddleboard lying deck up: boxy drop stitch rails with seam tape, grooved deck pad and kick, carry strap, bungee on D-rings, inflation valve, leash ring, centre fin and two side fins. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-inflatable-stand-up-paddlebo-16e3ae20","cdnUrl":"https://cdn.3dassets.dev/assets/39416/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-inflatable-stand-up-paddlebo-16e3ae20","thumbnailUrl":"https://cdn.3dassets.dev/assets/39416/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39416/v1/poster.webp","blurhash":"U7ATfl$^8^9i-=9Gs*tS004?_3?EDh~oS*RO","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":116316,"triangles":6696,"vertices":4519,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.4169103062581793,0.00004180430616521069,-1.5],"max":[0.4169103062581793,0.3676663090674686,1.5]},"sizeMeters":[0.834,0.368,3],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":7,"publishedAt":"2026-09-23T15:10:31.553Z","updatedAt":"2026-10-03T05:38:11.311Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39416/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function InflatableStandUpPaddleboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39416/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39416/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39416/v1/model.glb\" alt=\"Inflatable Stand Up Paddleboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39416/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39416/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39420","slug":"beach-surf-and-paddle-kit-rescue-paddleboard-183e649e","title":"Rescue Paddleboard (Beach Surf and Paddle Kit)","summary":"3.4 m rescue paddleboard lying deck up: pointed nose with strong rocker, full length deck pad, stringer, eight rope handles along the rails and a single fin.","description":"3.4 m rescue paddleboard lying deck up: pointed nose with strong rocker, full length deck pad, stringer, eight rope handles along the rails and a single fin. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-rescue-paddleboard-183e649e","cdnUrl":"https://cdn.3dassets.dev/assets/39420/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-rescue-paddleboard-183e649e","thumbnailUrl":"https://cdn.3dassets.dev/assets/39420/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39420/v1/poster.webp","blurhash":"U9AcuNMy02%0?Z9tRk%K00Nu~of+02~B%L9b","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":75660,"triangles":4596,"vertices":2720,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.40018136196822324,-0.0000036169952783993153,-1.7000000476837158],"max":[0.40018136196822324,0.4112862423635324,1.7000000476837158]},"sizeMeters":[0.8,0.411,3.4],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":7,"publishedAt":"2026-09-23T15:10:31.699Z","updatedAt":"2026-10-03T05:39:34.609Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39420/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RescuePaddleboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39420/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39420/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39420/v1/model.glb\" alt=\"Rescue Paddleboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39420/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39420/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39415","slug":"beach-surf-and-paddle-kit-sit-on-top-kayak-07093469","title":"Sit On Top Kayak (Beach Surf and Paddle Kit)","summary":"3.1 m sit-on-top kayak: rockered hull with moulded cockpit well, padded seat and seat back with straps, footrest steps, scupper holes, domed bow hatch, rear bungee tank well, toggle handles, side handles, keel strip and stern skeg.","description":"3.1 m sit-on-top kayak: rockered hull with moulded cockpit well, padded seat and seat back with straps, footrest steps, scupper holes, domed bow hatch, rear bungee tank well, toggle handles, side handles, keel strip and stern skeg. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-sit-on-top-kayak-07093469","cdnUrl":"https://cdn.3dassets.dev/assets/39415/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-sit-on-top-kayak-07093469","thumbnailUrl":"https://cdn.3dassets.dev/assets/39415/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39415/v1/poster.webp","blurhash":"UAB2x}s:0yjuoz9uWB%100NG}[oLV?}@t8E2","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":116600,"triangles":6668,"vertices":4556,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.40072092442552243,0.00003690093507424663,-1.569000005722046],"max":[0.40072092442552243,0.4535005036021267,1.569000005722046]},"sizeMeters":[0.801,0.453,3.138],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":7,"publishedAt":"2026-09-23T15:10:31.538Z","updatedAt":"2026-10-03T05:39:03.901Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39415/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SitOnTopKayakBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39415/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39415/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39415/v1/model.glb\" alt=\"Sit On Top Kayak (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39415/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39415/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39422","slug":"beach-surf-and-paddle-kit-kayak-paddle-80e6fa3b","title":"Kayak Paddle (Beach Surf and Paddle Kit)","summary":"2.2 m two piece kayak paddle lying flat: timber shaft with steel ferrule and push button, rubber grip sleeves, two drip rings and dihedral coral blades with a spine.","description":"2.2 m two piece kayak paddle lying flat: timber shaft with steel ferrule and push button, rubber grip sleeves, two drip rings and dihedral coral blades with a spine. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-kayak-paddle-80e6fa3b","cdnUrl":"https://cdn.3dassets.dev/assets/39422/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-kayak-paddle-80e6fa3b","thumbnailUrl":"https://cdn.3dassets.dev/assets/39422/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39422/v1/poster.webp","blurhash":"U58N5^t7#SxG%2~BsoRj00s:x]WqIV01kCx]","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":31248,"triangles":1120,"vertices":1307,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-1.100000023841858,0.000008972193365340553,-0.1114535990220334],"max":[1.100000023841858,0.0839910266741464,0.1114535990220334]},"sizeMeters":[2.2,0.084,0.223],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:34.328Z","updatedAt":"2026-10-03T05:39:03.011Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39422/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function KayakPaddleBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39422/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39422/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39422/v1/model.glb\" alt=\"Kayak Paddle (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39422/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39422/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39427","slug":"beach-surf-and-paddle-kit-stand-up-paddle-38519c37","title":"Stand Up Paddle (Beach Surf and Paddle Kit)","summary":"1.9 m adjustable stand-up paddle lying flat: timber shaft, moulded palm T grip, lever lock clamp, blade collar and a ridged teal blade with a foam edge line.","description":"1.9 m adjustable stand-up paddle lying flat: timber shaft, moulded palm T grip, lever lock clamp, blade collar and a ridged teal blade with a foam edge line. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-stand-up-paddle-38519c37","cdnUrl":"https://cdn.3dassets.dev/assets/39427/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-stand-up-paddle-38519c37","thumbnailUrl":"https://cdn.3dassets.dev/assets/39427/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39427/v1/poster.webp","blurhash":"U57w{9+G0hTH#l?un$IV00PA~UrsB:00XT_2","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":21256,"triangles":748,"vertices":764,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.8880000114440918,-0.00001623666224712106,-0.10973050495864932],"max":[1.1799999475479126,0.04799993803911269,0.10973050495864932]},"sizeMeters":[2.068,0.048,0.219],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:34.604Z","updatedAt":"2026-10-02T13:24:33.660Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39427/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function StandUpPaddleBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39427/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39427/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39427/v1/model.glb\" alt=\"Stand Up Paddle (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39427/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39427/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39428","slug":"beach-surf-and-paddle-kit-recreational-jet-ski-a61d9936","title":"Recreational Jet Ski (Beach Surf and Paddle Kit)","summary":"3.0 m sit down jet ski: deep vee hull with chines, coral cowl, stepped two place seat with grab strap and rail, ribbed footwell mats, rub rails, stripes, sponsons, handlebar, mirrors, gauge pod, windscreen, jet nozzle, ride plate, intake grate, boarding step and bow eye.","description":"3.0 m sit down jet ski: deep vee hull with chines, coral cowl, stepped two place seat with grab strap and rail, ribbed footwell mats, rub rails, stripes, sponsons, handlebar, mirrors, gauge pod, windscreen, jet nozzle, ride plate, intake grate, boarding step and bow eye. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-recreational-jet-ski-a61d9936","cdnUrl":"https://cdn.3dassets.dev/assets/39428/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-recreational-jet-ski-a61d9936","thumbnailUrl":"https://cdn.3dassets.dev/assets/39428/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39428/v1/poster.webp","blurhash":"U8BMoa=_009_E1IUt7xa009_^+=c~V?bIoNa","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":181296,"triangles":10320,"vertices":7117,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-0.5939936659743338,-0.000039761111258029835,-1.7400000095367432],"max":[0.5939936659743338,1.0301772991065317,1.5]},"sizeMeters":[1.188,1.03,3.24],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_materials_transmission","KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":12,"publishedAt":"2026-09-23T15:10:34.617Z","updatedAt":"2026-10-02T13:24:34.843Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39428/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RecreationalJetSkiBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39428/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39428/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39428/v1/model.glb\" alt=\"Recreational Jet Ski (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39428/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39428/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39424","slug":"beach-surf-and-paddle-kit-bodyboard-5f1c318f","title":"Bodyboard (Beach Surf and Paddle Kit)","summary":"1.05 m bodyboard standing tail down: crescent tail, 50/50 rails, navy deck skin with raised elbow contours and a nose band, leash plug and a coiled wrist leash.","description":"1.05 m bodyboard standing tail down: crescent tail, 50/50 rails, navy deck skin with raised elbow contours and a nose band, leash plug and a coiled wrist leash. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-bodyboard-5f1c318f","cdnUrl":"https://cdn.3dassets.dev/assets/39424/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-bodyboard-5f1c318f","thumbnailUrl":"https://cdn.3dassets.dev/assets/39424/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39424/v1/poster.webp","blurhash":"U8AAUDD;00~Ot7xaM|IoDit1tTNNEibZ$fV]","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":71948,"triangles":4326,"vertices":2592,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.26998962955864564,0,-0.023189356223743088],"max":[0.26998962955864564,1.100000023841858,0.08974140182378626]},"sizeMeters":[0.54,1.1,0.113],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:34.445Z","updatedAt":"2026-10-03T05:38:59.229Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39424/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function BodyboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39424/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39424/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39424/v1/model.glb\" alt=\"Bodyboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39424/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39424/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39423","slug":"beach-surf-and-paddle-kit-skimboard-ec25b31f","title":"Skimboard (Beach Surf and Paddle Kit)","summary":"1.3 m flat skimboard lying on the sand: thin rockered plank with soft rails, coral centre stripe, twin foam rail lines and two ribbed traction pads, no fins.","description":"1.3 m flat skimboard lying on the sand: thin rockered plank with soft rails, coral centre stripe, twin foam rail lines and two ribbed traction pads, no fins. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-skimboard-ec25b31f","cdnUrl":"https://cdn.3dassets.dev/assets/39423/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-skimboard-ec25b31f","thumbnailUrl":"https://cdn.3dassets.dev/assets/39423/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39423/v1/poster.webp","blurhash":"U685TIMy00bv%gH?Rjx]00fh_Nt78_?^xtD%","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":79964,"triangles":4708,"vertices":3006,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.2749610788149055,-0.00001735256103559471,-0.6499999761581421],"max":[0.2749610788149055,0.053621977726498085,0.6499999761581421]},"sizeMeters":[0.55,0.054,1.3],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:34.409Z","updatedAt":"2026-10-03T05:39:12.622Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39423/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SkimboardBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39423/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39423/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39423/v1/model.glb\" alt=\"Skimboard (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39423/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39423/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39429","slug":"beach-surf-and-paddle-kit-lifeguard-tower-c000085e","title":"Lifeguard Tower (Beach Surf and Paddle Kit)","summary":"4.9 m timber lifeguard tower: braced legs on footings, joisted plank deck with railed apron and blank sign, board and batten cabin with glazed window band, rear doorway, stool and binoculars, hipped roof with capped hips, roof flagpole with patrol flag and a railed stair.","description":"4.9 m timber lifeguard tower: braced legs on footings, joisted plank deck with railed apron and blank sign, board and batten cabin with glazed window band, rear doorway, stool and binoculars, hipped roof with capped hips, roof flagpole with patrol flag and a railed stair. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-lifeguard-tower-c000085e","cdnUrl":"https://cdn.3dassets.dev/assets/39429/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-lifeguard-tower-c000085e","thumbnailUrl":"https://cdn.3dassets.dev/assets/39429/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39429/v1/poster.webp","blurhash":"UBCY?n^*000LMyjGozX800E2~B-UEdNF-V%2","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":332684,"triangles":16092,"vertices":14258,"meshes":9,"materials":9,"textures":0,"animations":[],"boundingBox":{"min":[-1.2699231010595573,0.000030509898117259127,-3.4792428016662598],"max":[1.2699231010595573,6.1776251792907715,1.7400000095367432]},"sizeMeters":[2.54,6.178,5.219],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_materials_transmission","KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":14,"publishedAt":"2026-09-23T15:10:34.882Z","updatedAt":"2026-10-02T13:24:08.971Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39429/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function LifeguardTowerBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39429/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39429/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39429/v1/model.glb\" alt=\"Lifeguard Tower (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39429/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39429/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39425","slug":"beach-surf-and-paddle-kit-patrol-flag-pole-30eed28d","title":"Patrol Flag Pole (Beach Surf and Paddle Kit)","summary":"3.1 m patrol flag pole: fibreglass pole in a ground sleeve, pulley ring, cleat, halyard, sun finial and a waving red over yellow swim between the flags flag.","description":"3.1 m patrol flag pole: fibreglass pole in a ground sleeve, pulley ring, cleat, halyard, sun finial and a waving red over yellow swim between the flags flag. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-patrol-flag-pole-30eed28d","cdnUrl":"https://cdn.3dassets.dev/assets/39425/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-patrol-flag-pole-30eed28d","thumbnailUrl":"https://cdn.3dassets.dev/assets/39425/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39425/v1/poster.webp","blurhash":"UDATQD-;0000~Uoz4:RPMdRjtl%3M|t6xtIp","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":26872,"triangles":850,"vertices":1076,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.05999252194351181,0,-0.05999252194351181],"max":[0.8949999809265137,3.1550302060628677,0.05999252194351181]},"sizeMeters":[0.955,3.155,0.12],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":9,"publishedAt":"2026-09-23T15:10:34.464Z","updatedAt":"2026-10-02T13:24:11.714Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39425/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PatrolFlagPoleBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39425/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39425/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39425/v1/model.glb\" alt=\"Patrol Flag Pole (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39425/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39425/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39426","slug":"beach-surf-and-paddle-kit-swim-zone-buoy-ec54d875","title":"Swim Zone Buoy (Beach Surf and Paddle Kit)","summary":"1.4 m swim zone marker buoy: lathed coral float with two foam reflective bands, lifting eyes, mooring eye, timber mast and a sun yellow cross topmark.","description":"1.4 m swim zone marker buoy: lathed coral float with two foam reflective bands, lifting eyes, mooring eye, timber mast and a sun yellow cross topmark. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-swim-zone-buoy-ec54d875","cdnUrl":"https://cdn.3dassets.dev/assets/39426/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-swim-zone-buoy-ec54d875","thumbnailUrl":"https://cdn.3dassets.dev/assets/39426/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39426/v1/poster.webp","blurhash":"UDBC_Sxt00E2EKWB$lkD9YbF-pjJ~Wof4:R*","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":46056,"triangles":1400,"vertices":2024,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-0.3100000023841858,0,-0.3100000023841858],"max":[0.3100000023841858,1.4394524171948433,0.3100000023841858]},"sizeMeters":[0.62,1.439,0.62],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":6,"publishedAt":"2026-09-23T15:10:34.531Z","updatedAt":"2026-10-02T13:24:08.721Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39426/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SwimZoneBuoyBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39426/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39426/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39426/v1/model.glb\" alt=\"Swim Zone Buoy (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39426/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39426/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39434","slug":"beach-surf-and-paddle-kit-surf-hire-hut-465717eb","title":"Surf Hire Hut (Beach Surf and Paddle Kit)","summary":"3.8 m surf hire hut: plank deck on blocks, teal weatherboard walls, open counter with a propped coral shutter, blank sign boards, standing seam gable roof with barge boards and ridge roll, wetsuits on a rail, rash vest shelves and three hire boards inside.","description":"3.8 m surf hire hut: plank deck on blocks, teal weatherboard walls, open counter with a propped coral shutter, blank sign boards, standing seam gable roof with barge boards and ridge roll, wetsuits on a rail, rash vest shelves and three hire boards inside. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-surf-hire-hut-465717eb","cdnUrl":"https://cdn.3dassets.dev/assets/39434/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-surf-hire-hut-465717eb","thumbnailUrl":"https://cdn.3dassets.dev/assets/39434/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39434/v1/poster.webp","blurhash":"UEGkn2^j005R}Z-pKNM{00J7-UxG1cNa#8IU","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":521200,"triangles":27548,"vertices":21748,"meshes":9,"materials":9,"textures":0,"animations":[],"boundingBox":{"min":[-2.180000066757202,0.0000378421973695614,-1.8026499680834365],"max":[2.180000066757202,3.5173461852042616,2.2531696568476356]},"sizeMeters":[4.36,3.517,4.056],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":14,"publishedAt":"2026-09-23T15:10:37.405Z","updatedAt":"2026-10-03T00:27:26.156Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39434/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurfHireHutBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39434/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39434/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39434/v1/model.glb\" alt=\"Surf Hire Hut (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39434/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39434/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39430","slug":"beach-surf-and-paddle-kit-outdoor-beach-shower-82d93879","title":"Outdoor Beach Shower (Beach Surf and Paddle Kit)","summary":"2.9 m outdoor beach shower: two timber posts under a banded navy water tank, steel supply pipe with clamps, arm and shower rose, push valve, foot tap, soap shelf, towel hook, and a slatted duckboard on a gravel soak pad.","description":"2.9 m outdoor beach shower: two timber posts under a banded navy water tank, steel supply pipe with clamps, arm and shower rose, push valve, foot tap, soap shelf, towel hook, and a slatted duckboard on a gravel soak pad. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-outdoor-beach-shower-82d93879","cdnUrl":"https://cdn.3dassets.dev/assets/39430/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-outdoor-beach-shower-82d93879","thumbnailUrl":"https://cdn.3dassets.dev/assets/39430/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39430/v1/poster.webp","blurhash":"U6AABqEe00^Q03M{~S%gKR-UwF58M{ahxtt3","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":80252,"triangles":3440,"vertices":3429,"meshes":8,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-0.6200000271201134,0,-0.3022625560387339],"max":[0.6200000271201134,2.9600000381469727,1.0700000524520874]},"sizeMeters":[1.24,2.96,1.372],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":7,"publishedAt":"2026-09-23T15:10:37.244Z","updatedAt":"2026-10-02T13:24:12.082Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39430/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function OutdoorBeachShowerBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39430/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39430/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39430/v1/model.glb\" alt=\"Outdoor Beach Shower (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39430/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39430/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39432","slug":"beach-surf-and-paddle-kit-freestanding-surfboard-rack-d0402f59","title":"Freestanding Surfboard Rack (Beach Surf and Paddle Kit)","summary":"2.4 m freestanding surfboard rack: timber end frames with braces and runners, padded base trough, top rails and foam sleeved steel dividers making four upright board slots, and a blank navy plate.","description":"2.4 m freestanding surfboard rack: timber end frames with braces and runners, padded base trough, top rails and foam sleeved steel dividers making four upright board slots, and a blank navy plate. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-freestanding-surfboard-rack-d0402f59","cdnUrl":"https://cdn.3dassets.dev/assets/39432/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-freestanding-surfboard-rack-d0402f59","thumbnailUrl":"https://cdn.3dassets.dev/assets/39432/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39432/v1/poster.webp","blurhash":"U9DvAmx@D$%K?F~UbJE200niI[RoIrI;aKE3","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":69668,"triangles":2420,"vertices":3212,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-1.2200000286102295,-0.000058586298405272075,-0.44995575871317556],"max":[1.2200000286102295,1.0800586301078192,0.44995575871317556]},"sizeMeters":[2.44,1.08,0.9],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":9,"publishedAt":"2026-09-23T15:10:37.343Z","updatedAt":"2026-10-02T13:24:08.666Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39432/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FreestandingSurfboardRackBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39432/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39432/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39432/v1/model.glb\" alt=\"Freestanding Surfboard Rack (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39432/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39432/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39431","slug":"beach-surf-and-paddle-kit-pop-up-changing-tent-5762c0fa","title":"Pop Up Changing Tent (Beach Surf and Paddle Kit)","summary":"2.3 m pop-up changing tent: steel corner poles with feet, sun fabric walls, zipped door with rolled coral blind, mesh side windows, coral pyramid canopy with skirt and seams, guy lines to pegs and weighted sand pockets.","description":"2.3 m pop-up changing tent: steel corner poles with feet, sun fabric walls, zipped door with rolled coral blind, mesh side windows, coral pyramid canopy with skirt and seams, guy lines to pegs and weighted sand pockets. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-pop-up-changing-tent-5762c0fa","cdnUrl":"https://cdn.3dassets.dev/assets/39431/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-pop-up-changing-tent-5762c0fa","thumbnailUrl":"https://cdn.3dassets.dev/assets/39431/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39431/v1/poster.webp","blurhash":"UCEoVi-p02E2DkWBo[of00M|~8s.u1j]-Et6","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":80984,"triangles":3364,"vertices":3518,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.3700000047683716,-0.000009792897431082359,-1.3574568973300798],"max":[1.3700000047683716,2.3299999237060547,1.3574568973300798]},"sizeMeters":[2.74,2.33,2.715],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:37.261Z","updatedAt":"2026-10-02T13:24:08.974Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39431/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PopUpChangingTentBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39431/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39431/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39431/v1/model.glb\" alt=\"Pop Up Changing Tent (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39431/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39431/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39433","slug":"beach-surf-and-paddle-kit-kayak-storage-rack-fe80bcdf","title":"Kayak Storage Rack (Beach Surf and Paddle Kit)","summary":"2 m kayak storage rack: two splayed A-frame stands on runners with bolted joints, tie rails and angled padded cradles that hold one hull.","description":"2 m kayak storage rack: two splayed A-frame stands on runners with bolted joints, tie rails and angled padded cradles that hold one hull. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-kayak-storage-rack-fe80bcdf","cdnUrl":"https://cdn.3dassets.dev/assets/39433/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-kayak-storage-rack-fe80bcdf","thumbnailUrl":"https://cdn.3dassets.dev/assets/39433/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39433/v1/poster.webp","blurhash":"U6C6V??G4p%0E4~Uxt9H009b-:X4-o0Mad-o","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":47704,"triangles":2104,"vertices":2012,"meshes":3,"materials":3,"textures":0,"animations":[],"boundingBox":{"min":[-0.9700000286102295,-0.00005494926714411097,-0.49999391104546576],"max":[0.9700000286102295,0.739377132360196,0.49999391104546576]},"sizeMeters":[1.94,0.739,1],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":6,"publishedAt":"2026-09-23T15:10:37.365Z","updatedAt":"2026-10-02T13:24:35.656Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39433/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function KayakStorageRackBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39433/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39433/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39433/v1/model.glb\" alt=\"Kayak Storage Rack (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39433/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39433/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39435","slug":"beach-surf-and-paddle-kit-palm-shade-shelter-b91a6960","title":"Palm Shade Shelter (Beach Surf and Paddle Kit)","summary":"3.4 m open palm shade shelter: four lashed posts, lapped beam frame and rafters under a three layer palm thatch with a hanging frond fringe, and a timber bench beneath.","description":"3.4 m open palm shade shelter: four lashed posts, lapped beam frame and rafters under a three layer palm thatch with a hanging frond fringe, and a timber bench beneath. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-palm-shade-shelter-b91a6960","cdnUrl":"https://cdn.3dassets.dev/assets/39435/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-palm-shade-shelter-b91a6960","thumbnailUrl":"https://cdn.3dassets.dev/assets/39435/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39435/v1/poster.webp","blurhash":"U8BptUx[00jZ.ls:IBRj00M{_Lj]00Rj?uxa","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":64392,"triangles":2648,"vertices":2803,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-2,0,-2],"max":[2,3.4300610669441327,2]},"sizeMeters":[4,3.43,4],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":10,"publishedAt":"2026-09-23T15:10:37.438Z","updatedAt":"2026-10-02T13:24:08.969Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39435/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PalmShadeShelterBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39435/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39435/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39435/v1/model.glb\" alt=\"Palm Shade Shelter (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39435/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39435/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39436","slug":"beach-surf-and-paddle-kit-ring-buoy-post-92d04ac6","title":"Ring Buoy Post (Beach Surf and Paddle Kit)","summary":"1.8 m life ring station: timber post with pyramid cap and footing, blank navy plate, steel pegs, coral life ring with four foam tapes and a grab line, and a coiled throw line.","description":"1.8 m life ring station: timber post with pyramid cap and footing, blank navy plate, steel pegs, coral life ring with four foam tapes and a grab line, and a coiled throw line. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-ring-buoy-post-92d04ac6","cdnUrl":"https://cdn.3dassets.dev/assets/39436/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-ring-buoy-post-92d04ac6","thumbnailUrl":"https://cdn.3dassets.dev/assets/39436/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39436/v1/poster.webp","blurhash":"U9AJp3$*00ABbcsooIR+0MI:}?-BRONHbd%0","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":86116,"triangles":2540,"vertices":4142,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-0.381057016854593,0.000012511938186656607,-0.17000000178813934],"max":[0.381057016854593,1.7599999904632568,0.28098999314999473]},"sizeMeters":[0.762,1.76,0.451],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":10,"publishedAt":"2026-09-23T15:10:37.762Z","updatedAt":"2026-10-02T13:24:35.668Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39436/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RingBuoyPostBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39436/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39436/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39436/v1/model.glb\" alt=\"Ring Buoy Post (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39436/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39436/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39437","slug":"beach-surf-and-paddle-kit-striped-beach-towel-3da16df7","title":"Striped Beach Towel (Beach Surf and Paddle Kit)","summary":"1.7 m striped beach towel lying flat with soft rucks: coral ground, three sun yellow bands and fringed ends.","description":"1.7 m striped beach towel lying flat with soft rucks: coral ground, three sun yellow bands and fringed ends. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-striped-beach-towel-3da16df7","cdnUrl":"https://cdn.3dassets.dev/assets/39437/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-striped-beach-towel-3da16df7","thumbnailUrl":"https://cdn.3dassets.dev/assets/39437/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39437/v1/poster.webp","blurhash":"UCE2OWxu0MkCxZ-:f+E200WA~AV@Ip0MaK?F","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":82988,"triangles":4424,"vertices":3346,"meshes":3,"materials":3,"textures":0,"animations":[],"boundingBox":{"min":[-0.8949999809265137,-0.00002990459625205888,-0.4000007419487662],"max":[0.8949999809265137,0.021977532578376743,0.4000007419487662]},"sizeMeters":[1.79,0.022,0.8],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:37.777Z","updatedAt":"2026-10-02T13:24:12.138Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39437/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function StripedBeachTowelBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39437/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39437/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39437/v1/model.glb\" alt=\"Striped Beach Towel (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39437/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39437/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39439","slug":"beach-surf-and-paddle-kit-folded-towel-stack-b2ff3029","title":"Folded Towel Stack (Beach Surf and Paddle Kit)","summary":"Stack of four folded towels with rolled fold edges and contrast bands, held by a navy carry strap with a handle.","description":"Stack of four folded towels with rolled fold edges and contrast bands, held by a navy carry strap with a handle. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-folded-towel-stack-b2ff3029","cdnUrl":"https://cdn.3dassets.dev/assets/39439/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-folded-towel-stack-b2ff3029","thumbnailUrl":"https://cdn.3dassets.dev/assets/39439/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39439/v1/poster.webp","blurhash":"UCGIfT~o00Ir+q-mS7E400D%wtM|EC9~X,${","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":34120,"triangles":1428,"vertices":1484,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.2529999911785126,-0.000007240695419866161,-0.19101603617818622],"max":[0.2529999911785126,0.3659026966044183,0.19498542294137686]},"sizeMeters":[0.506,0.366,0.386],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":7,"publishedAt":"2026-09-23T15:10:40.104Z","updatedAt":"2026-10-02T13:24:35.681Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39439/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FoldedTowelStackBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39439/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39439/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39439/v1/model.glb\" alt=\"Folded Towel Stack (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39439/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39439/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39438","slug":"beach-surf-and-paddle-kit-cooler-box-3c6c2b15","title":"Cooler Box (Beach Surf and Paddle Kit)","summary":"Wheeled cooler box: bevelled teal body, foam lid with cup rings and hinge, two latches, side grips, rear wheels on a steel axle, feet, telescopic pull handle and drain plug.","description":"Wheeled cooler box: bevelled teal body, foam lid with cup rings and hinge, two latches, side grips, rear wheels on a steel axle, feet, telescopic pull handle and drain plug. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-cooler-box-3c6c2b15","cdnUrl":"https://cdn.3dassets.dev/assets/39438/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-cooler-box-3c6c2b15","thumbnailUrl":"https://cdn.3dassets.dev/assets/39438/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39438/v1/poster.webp","blurhash":"UQE3*ax]4TV@~Wt7IoRj8wnOxuR*0ekC$jV@","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":48848,"triangles":1512,"vertices":2206,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.3431316018104553,-0.000013654595179268814,-0.23201255850641933],"max":[0.3431316018104553,0.5190348080451914,0.2075125610098144]},"sizeMeters":[0.686,0.519,0.44],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":8,"publishedAt":"2026-09-23T15:10:40.089Z","updatedAt":"2026-10-02T13:24:35.719Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39438/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CoolerBoxBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39438/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39438/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39438/v1/model.glb\" alt=\"Cooler Box (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39438/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39438/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39441","slug":"beach-surf-and-paddle-kit-sand-bucket-818e0db7","title":"Sand Bucket (Beach Surf and Paddle Kit)","summary":"Sand bucket with real wall thickness, rolled rim, moulded rings, handle lugs, heaped sand fill and a wire swing handle with a teal grip.","description":"Sand bucket with real wall thickness, rolled rim, moulded rings, handle lugs, heaped sand fill and a wire swing handle with a teal grip. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-sand-bucket-818e0db7","cdnUrl":"https://cdn.3dassets.dev/assets/39441/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-sand-bucket-818e0db7","thumbnailUrl":"https://cdn.3dassets.dev/assets/39441/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39441/v1/poster.webp","blurhash":"UED[hF%200E2KiW;#SsU01Rk~Bt6MKn%cES1","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":68160,"triangles":1988,"vertices":3289,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.19017638266086578,-0.000008851173330270967,-0.1850000023841858],"max":[0.19017638266086578,0.45831704934472933,0.1850000023841858]},"sizeMeters":[0.38,0.458,0.37],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":15,"publishedAt":"2026-09-23T15:10:40.229Z","updatedAt":"2026-10-03T07:39:46.551Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39441/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SandBucketBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39441/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39441/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39441/v1/model.glb\" alt=\"Sand Bucket (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39441/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39441/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39440","slug":"beach-surf-and-paddle-kit-sand-spade-5b7ac6d0","title":"Sand Spade (Beach Surf and Paddle Kit)","summary":"Beach spade lying flat: teal shaft with ring grip and cross bar, sun collar and a cupped moulded blade.","description":"Beach spade lying flat: teal shaft with ring grip and cross bar, sun collar and a cupped moulded blade. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-sand-spade-5b7ac6d0","cdnUrl":"https://cdn.3dassets.dev/assets/39440/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-sand-spade-5b7ac6d0","thumbnailUrl":"https://cdn.3dassets.dev/assets/39440/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39440/v1/poster.webp","blurhash":"UB8Eex^bv|S6OZDjRlo}009dXnxY;^_M%1Md","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":15132,"triangles":696,"vertices":556,"meshes":2,"materials":2,"textures":0,"animations":[],"boundingBox":{"min":[-0.0847422687490455,0.000007110748274152118,-0.3310000002384186],"max":[0.0847422687490455,0.037992888029830627,0.6200000047683716]},"sizeMeters":[0.169,0.038,0.951],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":12,"publishedAt":"2026-09-23T15:10:40.148Z","updatedAt":"2026-10-03T07:40:50.589Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39440/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SandSpadeBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39440/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39440/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39440/v1/model.glb\" alt=\"Sand Spade (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39440/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39440/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39443","slug":"beach-surf-and-paddle-kit-sand-castle-07e02ad1","title":"Sand Castle (Beach Surf and Paddle Kit)","summary":"Moulded sand castle on a sand mound: four bucket towers with mould rings and crenels, crenellated curtain walls, a central keep with windows, a gate arch, pennant flag and shell decoration.","description":"Moulded sand castle on a sand mound: four bucket towers with mould rings and crenels, crenellated curtain walls, a central keep with windows, a gate arch, pennant flag and shell decoration. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-sand-castle-07e02ad1","cdnUrl":"https://cdn.3dassets.dev/assets/39443/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-sand-castle-07e02ad1","thumbnailUrl":"https://cdn.3dassets.dev/assets/39443/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39443/v1/poster.webp","blurhash":"UGD+;%t800WA0LWA%Lj]00WA^*a#~pt7M|ay","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":230704,"triangles":8832,"vertices":10831,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.949999988079071,0.000012374113072199933,-0.949999988079071],"max":[0.949999988079071,1.0499999523162842,0.949999988079071]},"sizeMeters":[1.9,1.05,1.9],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":17,"publishedAt":"2026-09-23T15:10:40.352Z","updatedAt":"2026-10-03T07:40:47.883Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39443/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SandCastleBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39443/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39443/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39443/v1/model.glb\" alt=\"Sand Castle (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39443/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39443/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39442","slug":"beach-surf-and-paddle-kit-beach-ball-81bc6380","title":"Beach Ball (Beach Surf and Paddle Kit)","summary":"Inflatable beach ball with six gores in coral, sun and teal on foam white, white pole caps and an inflation valve.","description":"Inflatable beach ball with six gores in coral, sun and teal on foam white, white pole caps and an inflation valve. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-beach-ball-81bc6380","cdnUrl":"https://cdn.3dassets.dev/assets/39442/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-beach-ball-81bc6380","thumbnailUrl":"https://cdn.3dassets.dev/assets/39442/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39442/v1/poster.webp","blurhash":"UHEoY?%L00IB?ajYIUf,00M{}[tl9FbJx]ad","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":23832,"triangles":1288,"vertices":911,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.3000062306727453,0,-0.3000151293254217],"max":[0.3000062306727453,0.6000000238418579,0.3100078531924095]},"sizeMeters":[0.6,0.6,0.61],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":10,"publishedAt":"2026-09-23T15:10:39.205Z","updatedAt":"2026-10-03T09:47:27.410Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39442/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function BeachBallBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39442/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39442/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39442/v1/model.glb\" alt=\"Beach Ball (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39442/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39442/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39444","slug":"beach-surf-and-paddle-kit-volleyball-17bb5a66","title":"Volleyball (Beach Surf and Paddle Kit)","summary":"Beach volleyball with six curved panels in foam, sun and navy and recessed charcoal seams.","description":"Beach volleyball with six curved panels in foam, sun and navy and recessed charcoal seams. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-volleyball-17bb5a66","cdnUrl":"https://cdn.3dassets.dev/assets/39444/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-volleyball-17bb5a66","thumbnailUrl":"https://cdn.3dassets.dev/assets/39444/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39444/v1/poster.webp","blurhash":"UGCGSx-n009htRfRRQWB00IX~p%EV?j?t7of","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":23148,"triangles":1404,"vertices":900,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.10869999974966049,0.000005148278885439006,-0.1044232007312586],"max":[0.10869999974966049,0.21735206998664802,0.1044232007312586]},"sizeMeters":[0.217,0.217,0.209],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":13,"publishedAt":"2026-09-23T15:10:40.596Z","updatedAt":"2026-10-03T07:41:01.300Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39444/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function VolleyballBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39444/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39444/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39444/v1/model.glb\" alt=\"Volleyball (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39444/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39444/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39445","slug":"beach-surf-and-paddle-kit-volleyball-net-e371f956","title":"Volleyball Net (Beach Surf and Paddle Kit)","summary":"9.2 m beach volleyball net: padded steel posts in sleeves with winches, guy lines and pegs, taped net with knotted mesh, side bands, striped antennae and a head cable.","description":"9.2 m beach volleyball net: padded steel posts in sleeves with winches, guy lines and pegs, taped net with knotted mesh, side bands, striped antennae and a head cable. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-volleyball-net-e371f956","cdnUrl":"https://cdn.3dassets.dev/assets/39445/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-volleyball-net-e371f956","thumbnailUrl":"https://cdn.3dassets.dev/assets/39445/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39445/v1/poster.webp","blurhash":"U47-c-f#4nx]-;_3IUIU00t6~qDi0000?c?b","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":129144,"triangles":3140,"vertices":6568,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-5.809999942779541,-0.0002317993620599701,-0.8085451746902282],"max":[5.809999942779541,3.1000598936358217,0.8085451746902282]},"sizeMeters":[11.62,3.1,1.617],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":16,"publishedAt":"2026-09-23T15:10:40.716Z","updatedAt":"2026-10-03T10:46:01.882Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39445/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function VolleyballNetBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39445/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39445/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39445/v1/model.glb\" alt=\"Volleyball Net (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39445/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39445/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39446","slug":"beach-surf-and-paddle-kit-flip-flop-pair-6ad0a85a","title":"Flip Flop Pair (Beach Surf and Paddle Kit)","summary":"Pair of flip-flops: contoured moulded soles in coral and teal, foam footbeds and Y straps on toe posts.","description":"Pair of flip-flops: contoured moulded soles in coral and teal, foam footbeds and Y straps on toe posts. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-flip-flop-pair-6ad0a85a","cdnUrl":"https://cdn.3dassets.dev/assets/39446/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-flip-flop-pair-6ad0a85a","thumbnailUrl":"https://cdn.3dassets.dev/assets/39446/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39446/v1/poster.webp","blurhash":"U6BzC3}r00of$MShJnWA005,~qIUAD#l;fo#","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":15568,"triangles":464,"vertices":564,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.13599882616437264,-0.000003356881459928851,-0.12999999523162842],"max":[0.13599882616437264,0.05188297890357496,0.14000000059604645]},"sizeMeters":[0.272,0.052,0.27],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":11,"publishedAt":"2026-09-23T15:10:42.029Z","updatedAt":"2026-10-03T07:40:43.373Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39446/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FlipFlopPairBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39446/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39446/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39446/v1/model.glb\" alt=\"Flip Flop Pair (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39446/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39446/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39447","slug":"beach-surf-and-paddle-kit-sport-sunglasses-b28a0db7","title":"Sport Sunglasses (Beach Surf and Paddle Kit)","summary":"Sport sunglasses set down on their temples: navy tinted lenses in wrapped charcoal rims, top bar, bridge, nose pads, steel hinges and curved temple tips.","description":"Sport sunglasses set down on their temples: navy tinted lenses in wrapped charcoal rims, top bar, bridge, nose pads, steel hinges and curved temple tips. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-sport-sunglasses-b28a0db7","cdnUrl":"https://cdn.3dassets.dev/assets/39447/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-sport-sunglasses-b28a0db7","thumbnailUrl":"https://cdn.3dassets.dev/assets/39447/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39447/v1/poster.webp","blurhash":"U65}z5?wRiRORPRjj]o#00D$ahRnx^xvRiRO","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":24056,"triangles":1002,"vertices":893,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.07443699174665258,-0.000003241987053773099,-0.16281473636627197],"max":[0.07500223004363821,0.053986364097420594,0.003000000026077032]},"sizeMeters":[0.149,0.054,0.166],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":17,"publishedAt":"2026-09-23T15:10:42.975Z","updatedAt":"2026-10-03T07:41:10.417Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39447/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SportSunglassesBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39447/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39447/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39447/v1/model.glb\" alt=\"Sport Sunglasses (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39447/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39447/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39449","slug":"beach-surf-and-paddle-kit-sunscreen-bottle-b2e6b945","title":"Sunscreen Bottle (Beach Surf and Paddle Kit)","summary":"Squeeze sunscreen bottle with a wrapped label and sun mark, flip top cap and nozzle tab.","description":"Squeeze sunscreen bottle with a wrapped label and sun mark, flip top cap and nozzle tab. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-sunscreen-bottle-b2e6b945","cdnUrl":"https://cdn.3dassets.dev/assets/39449/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-sunscreen-bottle-b2e6b945","thumbnailUrl":"https://cdn.3dassets.dev/assets/39449/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39449/v1/poster.webp","blurhash":"U9E.d^-:004.q{s.P8NI00M{_M%MtUjYRNW?","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":14824,"triangles":464,"vertices":573,"meshes":3,"materials":3,"textures":0,"animations":[],"boundingBox":{"min":[-0.039000000804662704,0,-0.025997986314827304],"max":[0.039000000804662704,0.18400000035762787,0.028997984943920474]},"sizeMeters":[0.078,0.184,0.055],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":13,"publishedAt":"2026-09-23T15:10:43.004Z","updatedAt":"2026-10-03T07:39:02.441Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39449/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SunscreenBottleBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39449/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39449/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39449/v1/model.glb\" alt=\"Sunscreen Bottle (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39449/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39449/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39448","slug":"beach-surf-and-paddle-kit-beach-bats-and-ball-e424d9f9","title":"Beach Bats And Ball (Beach Surf and Paddle Kit)","summary":"Beach bat set lying flat: two timber bats with coloured rubber faces and wrapped grips, and a coral ball.","description":"Beach bat set lying flat: two timber bats with coloured rubber faces and wrapped grips, and a coral ball. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-beach-bats-and-ball-e424d9f9","cdnUrl":"https://cdn.3dassets.dev/assets/39448/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-beach-bats-and-ball-e424d9f9","thumbnailUrl":"https://cdn.3dassets.dev/assets/39448/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39448/v1/poster.webp","blurhash":"U79G,M}@001JZ%xux[Io0058~p^4TwD*H@?H","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":27344,"triangles":728,"vertices":1198,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.2596028745174408,0.0000030209380168910033,-0.15001708113818302],"max":[0.2596028745174408,0.05999359037062825,0.2400170847144617]},"sizeMeters":[0.519,0.06,0.39],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":15,"publishedAt":"2026-09-23T15:10:42.993Z","updatedAt":"2026-10-03T07:38:42.116Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39448/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function BeachBatsAndBallBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39448/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39448/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39448/v1/model.glb\" alt=\"Beach Bats And Ball (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39448/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39448/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39450","slug":"beach-surf-and-paddle-kit-surf-leash-840ca19a","title":"Surf Leash (Beach Surf and Paddle Kit)","summary":"Coiled surf leash lying flat: navy ankle cuff with tab, steel swivels, coiled urethane cord, rail saver and plug string.","description":"Coiled surf leash lying flat: navy ankle cuff with tab, steel swivels, coiled urethane cord, rail saver and plug string. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-surf-leash-840ca19a","cdnUrl":"https://cdn.3dassets.dev/assets/39450/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-surf-leash-840ca19a","thumbnailUrl":"https://cdn.3dassets.dev/assets/39450/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39450/v1/poster.webp","blurhash":"U35hojItM{V{NL?wRkVs00s,-=bW-i00xux^","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":37880,"triangles":1786,"vertices":1466,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.3149999976158142,0.00000480721235558354,-0.054988251158223915],"max":[0.31193101430699993,0.060001744530390144,0.07499332272516684]},"sizeMeters":[0.627,0.06,0.13],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":14,"publishedAt":"2026-09-23T15:10:43.083Z","updatedAt":"2026-10-03T07:39:00.547Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39450/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurfLeashBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39450/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39450/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39450/v1/model.glb\" alt=\"Surf Leash (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39450/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39450/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39451","slug":"beach-surf-and-paddle-kit-surfboard-bag-2cb607f2","title":"Surfboard Bag (Beach Surf and Paddle Kit)","summary":"Padded 2 m surfboard travel bag lying flat: board shaped navy shell, zips along both rails with a pull, two strap handles with coral patches and a shoulder strap.","description":"Padded 2 m surfboard travel bag lying flat: board shaped navy shell, zips along both rails with a pull, two strap handles with coral patches and a shoulder strap. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-surfboard-bag-2cb607f2","cdnUrl":"https://cdn.3dassets.dev/assets/39451/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-surfboard-bag-2cb607f2","thumbnailUrl":"https://cdn.3dassets.dev/assets/39451/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39451/v1/poster.webp","blurhash":"U65#|xi|8^kDo~MvV?tT00bD.AogR3%jtTIS","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":44824,"triangles":2592,"vertices":1601,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.33294518792596867,-3.7630786828279916e-7,-1],"max":[0.33294518792596867,0.16836856751464174,1]},"sizeMeters":[0.666,0.168,2],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":14,"publishedAt":"2026-09-23T15:10:43.158Z","updatedAt":"2026-10-03T07:39:15.588Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39451/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurfboardBagBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39451/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39451/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39451/v1/model.glb\" alt=\"Surfboard Bag (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39451/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39451/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39452","slug":"beach-surf-and-paddle-kit-beach-gear-wagon-fb9f4cd8","title":"Beach Gear Wagon (Beach Surf and Paddle Kit)","summary":"Balloon wheel beach wagon: coral bed on a steel frame, two tier timber slat sides with posts, four fat tyres on sun hubs and axle blocks, and a steel pull handle with a T grip.","description":"Balloon wheel beach wagon: coral bed on a steel frame, two tier timber slat sides with posts, four fat tyres on sun hubs and axle blocks, and a steel pull handle with a T grip. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-beach-gear-wagon-fb9f4cd8","cdnUrl":"https://cdn.3dassets.dev/assets/39452/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-beach-gear-wagon-fb9f4cd8","thumbnailUrl":"https://cdn.3dassets.dev/assets/39452/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39452/v1/poster.webp","blurhash":"UHC6Ji~B57I@~B-oNHNH0KIp-UV@0fE2xZni","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":84652,"triangles":3652,"vertices":3639,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.5899999737739563,0.0000025247543060102906,-0.40498579902983195],"max":[1.2699999809265137,0.7800328209852974,0.40498579902983195]},"sizeMeters":[1.86,0.78,0.81],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":18,"publishedAt":"2026-09-23T15:10:43.345Z","updatedAt":"2026-10-03T07:40:42.281Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39452/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function BeachGearWagonBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39452/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39452/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39452/v1/model.glb\" alt=\"Beach Gear Wagon (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39452/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39452/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39453","slug":"beach-surf-and-paddle-kit-rescue-tube-1b321011","title":"Rescue Tube (Beach Surf and Paddle Kit)","summary":"Coral foam rescue tube lying flat: tapered capsule body, steel end rings and clip, charcoal webbing strap and a coiled sun yellow tow line.","description":"Coral foam rescue tube lying flat: tapered capsule body, steel end rings and clip, charcoal webbing strap and a coiled sun yellow tow line. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-rescue-tube-1b321011","cdnUrl":"https://cdn.3dassets.dev/assets/39453/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-rescue-tube-1b321011","thumbnailUrl":"https://cdn.3dassets.dev/assets/39453/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39453/v1/poster.webp","blurhash":"U7Al|OQ[5%NMr_~UM~I:00ti}[s+Ok01--={","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":35960,"triangles":2132,"vertices":1220,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.5501961708068848,-0.00002105519171891057,-0.07496810540778377],"max":[0.8819990754127502,0.11002327406075019,0.13450433383129462]},"sizeMeters":[1.432,0.11,0.209],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":15,"publishedAt":"2026-09-23T15:10:42.527Z","updatedAt":"2026-10-03T07:38:49.004Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39453/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function RescueTubeBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39453/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39453/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39453/v1/model.glb\" alt=\"Rescue Tube (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39453/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39453/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39454","slug":"beach-surf-and-paddle-kit-lifeguard-megaphone-7ac9861b","title":"Lifeguard Megaphone (Beach Surf and Paddle Kit)","summary":"Handheld lifeguard megaphone resting on its grip: coral flared bell with grille, battery housing, pistol grip and trigger, siren switch and carry strap.","description":"Handheld lifeguard megaphone resting on its grip: coral flared bell with grille, battery housing, pistol grip and trigger, siren switch and carry strap. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-lifeguard-megaphone-7ac9861b","cdnUrl":"https://cdn.3dassets.dev/assets/39454/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-lifeguard-megaphone-7ac9861b","thumbnailUrl":"https://cdn.3dassets.dev/assets/39454/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39454/v1/poster.webp","blurhash":"UJC#}K}@9tIpt7R*R%$*0L9u$*oMIpxaxaEM","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":26668,"triangles":956,"vertices":1124,"meshes":3,"materials":3,"textures":0,"animations":[],"boundingBox":{"min":[-0.13500251961226165,0,-0.1250053847251651],"max":[0.13500251961226165,0.3083754085498541,0.1850000023841858]},"sizeMeters":[0.27,0.308,0.31],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":23,"publishedAt":"2026-09-23T15:10:44.923Z","updatedAt":"2026-10-03T08:20:56.556Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39454/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function LifeguardMegaphoneBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39454/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39454/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39454/v1/model.glb\" alt=\"Lifeguard Megaphone (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39454/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39454/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39455","slug":"beach-surf-and-paddle-kit-dune-fence-run-cf3f7f77","title":"Dune Fence Run (Beach Surf and Paddle Kit)","summary":"2.6 m dune wind fence: three round timber posts, twin twisted wire lines at three heights and weathered grey slats set at slightly uneven heights.","description":"2.6 m dune wind fence: three round timber posts, twin twisted wire lines at three heights and weathered grey slats set at slightly uneven heights. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-dune-fence-run-cf3f7f77","cdnUrl":"https://cdn.3dassets.dev/assets/39455/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-dune-fence-run-cf3f7f77","thumbnailUrl":"https://cdn.3dassets.dev/assets/39455/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39455/v1/poster.webp","blurhash":"UGFiAD%2IA%2oI~WxZRP00Ri?aayWBD*R*x]","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":46868,"triangles":2184,"vertices":1930,"meshes":3,"materials":3,"textures":0,"animations":[],"boundingBox":{"min":[-1.34755277633667,-0.00006923115052992479,-0.05000836744362897],"max":[1.34755277633667,1.0509076426578958,0.05000836744362897]},"sizeMeters":[2.695,1.051,0.1],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":27,"publishedAt":"2026-09-23T15:10:45.287Z","updatedAt":"2026-10-03T08:20:56.556Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39455/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function DuneFenceRunBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39455/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39455/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39455/v1/model.glb\" alt=\"Dune Fence Run (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39455/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39455/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39457","slug":"beach-surf-and-paddle-kit-dune-grass-tuft-ae12b134","title":"Dune Grass Tuft (Beach Surf and Paddle Kit)","summary":"Marram dune grass tuft: 26 tapered curling blades and four seed heads rising from a low sand mound.","description":"Marram dune grass tuft: 26 tapered curling blades and four seed heads rising from a low sand mound. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-dune-grass-tuft-ae12b134","cdnUrl":"https://cdn.3dassets.dev/assets/39457/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-dune-grass-tuft-ae12b134","thumbnailUrl":"https://cdn.3dassets.dev/assets/39457/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39457/v1/poster.webp","blurhash":"U8AdDlWC00t7IWaxt5j]01af_Loxxoj]WGWU","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":27800,"triangles":1380,"vertices":1039,"meshes":3,"materials":3,"textures":0,"animations":[],"boundingBox":{"min":[-0.269755348322853,0.00000915669875013736,-0.2838701009750366],"max":[0.25999999046325684,0.9100000262260437,0.3527032136917114]},"sizeMeters":[0.53,0.91,0.637],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":29,"publishedAt":"2026-09-23T15:10:45.840Z","updatedAt":"2026-10-03T08:20:56.649Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39457/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function DuneGrassTuftBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39457/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39457/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39457/v1/model.glb\" alt=\"Dune Grass Tuft (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39457/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39457/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39458","slug":"beach-surf-and-paddle-kit-driftwood-log-c1157bff","title":"Driftwood Log (Beach Surf and Paddle Kit)","summary":"2.8 m weathered driftwood log: twisted tapering trunk, two branch stubs, a splayed root end and one sawn end showing the grain.","description":"2.8 m weathered driftwood log: twisted tapering trunk, two branch stubs, a splayed root end and one sawn end showing the grain. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-driftwood-log-c1157bff","cdnUrl":"https://cdn.3dassets.dev/assets/39458/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-driftwood-log-c1157bff","thumbnailUrl":"https://cdn.3dassets.dev/assets/39458/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39458/v1/poster.webp","blurhash":"U6AJ{0_34n%N-;~p%MIU00IU~qIU9F00D%?b","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":13608,"triangles":600,"vertices":494,"meshes":2,"materials":2,"textures":0,"animations":[],"boundingBox":{"min":[-1.4108541011810303,0.00007706299748416745,-0.23071627213127113],"max":[1.2589981913799426,0.6643938480285168,0.23094968392021156]},"sizeMeters":[2.67,0.664,0.462],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":26,"publishedAt":"2026-09-23T15:10:45.940Z","updatedAt":"2026-10-03T08:20:56.521Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39458/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function DriftwoodLogBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39458/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39458/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39458/v1/model.glb\" alt=\"Driftwood Log (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39458/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39458/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39460","slug":"beach-surf-and-paddle-kit-surf-wax-kit-46efa405","title":"Surf Wax Kit (Beach Surf and Paddle Kit)","summary":"Surf wax kit lying on the sand: sun yellow wax puck in a paper wrapper, a coral base coat bar and a toothed teal wax comb.","description":"Surf wax kit lying on the sand: sun yellow wax puck in a paper wrapper, a coral base coat bar and a toothed teal wax comb. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-surf-wax-kit-46efa405","cdnUrl":"https://cdn.3dassets.dev/assets/39460/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-surf-wax-kit-46efa405","thumbnailUrl":"https://cdn.3dassets.dev/assets/39460/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39460/v1/poster.webp","blurhash":"UEBDNG~U0K59TIocwJa%004;?a=^vNNLF_oG","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":40604,"triangles":1516,"vertices":1738,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.04699999839067459,-4.273571895321848e-7,-0.1349998481152612],"max":[0.13799999980255961,0.03699742215938934,0.06800000369548798]},"sizeMeters":[0.185,0.037,0.203],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":22,"publishedAt":"2026-09-23T15:10:46.086Z","updatedAt":"2026-10-03T08:20:56.520Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39460/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurfWaxKitBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39460/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39460/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39460/v1/model.glb\" alt=\"Surf Wax Kit (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39460/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39460/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39456","slug":"beach-surf-and-paddle-kit-beach-umbrella-fb839e7d","title":"Beach Umbrella (Beach Surf and Paddle Kit)","summary":"2.4 m beach umbrella: sand anchor with base plate, steel lower pole with tilt collar and knob, timber upper pole, runner and stretchers, eight steel ribs under alternating coral and foam panels with a scalloped valance, vent cap and finial.","description":"2.4 m beach umbrella: sand anchor with base plate, steel lower pole with tilt collar and knob, timber upper pole, runner and stretchers, eight steel ribs under alternating coral and foam panels with a scalloped valance, vent cap and finial. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-beach-umbrella-fb839e7d","cdnUrl":"https://cdn.3dassets.dev/assets/39456/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-beach-umbrella-fb839e7d","thumbnailUrl":"https://cdn.3dassets.dev/assets/39456/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39456/v1/poster.webp","blurhash":"UKBMY]s:0LR*~VoL9aWV9ZWV%2oL01WC?HoL","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":52048,"triangles":2052,"vertices":2205,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.1022433193150554,0,-1.1022433193150554],"max":[1.1022433193150554,2.439945651517016,1.1022433193150554]},"sizeMeters":[2.204,2.44,2.204],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":29,"publishedAt":"2026-09-23T15:10:45.823Z","updatedAt":"2026-10-03T08:20:56.640Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39456/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function BeachUmbrellaBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39456/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39456/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39456/v1/model.glb\" alt=\"Beach Umbrella (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39456/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39456/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39459","slug":"beach-surf-and-paddle-kit-folding-beach-chair-68794f97","title":"Folding Beach Chair (Beach Surf and Paddle Kit)","summary":"Low folding beach chair: steel tube frame with feet, timber armrests and a striped coral and foam sling seat that sags into the back.","description":"Low folding beach chair: steel tube frame with feet, timber armrests and a striped coral and foam sling seat that sags into the back. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-folding-beach-chair-68794f97","cdnUrl":"https://cdn.3dassets.dev/assets/39459/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-folding-beach-chair-68794f97","thumbnailUrl":"https://cdn.3dassets.dev/assets/39459/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39459/v1/poster.webp","blurhash":"UGELvtEL00~V=|D%IV?H00jF?GM|J8xas:R*","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":28168,"triangles":1168,"vertices":1034,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-0.32998444867257065,0.000016251168946436814,-0.5117301570231929],"max":[0.32998444867257065,0.9110000133514404,0.3449999988079071]},"sizeMeters":[0.66,0.911,0.857],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":28,"publishedAt":"2026-09-23T15:10:45.953Z","updatedAt":"2026-10-03T08:20:56.528Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39459/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FoldingBeachChairBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39459/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39459/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39459/v1/model.glb\" alt=\"Folding Beach Chair (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39459/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39459/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39461","slug":"beach-surf-and-paddle-kit-warning-flag-pole-04ad1969","title":"Warning Flag Pole (Beach Surf and Paddle Kit)","summary":"3.1 m warning flag pole: the patrol pole with a solid coral no swimming flag and coral finial.","description":"3.1 m warning flag pole: the patrol pole with a solid coral no swimming flag and coral finial. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-warning-flag-pole-04ad1969","cdnUrl":"https://cdn.3dassets.dev/assets/39461/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-warning-flag-pole-04ad1969","thumbnailUrl":"https://cdn.3dassets.dev/assets/39461/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39461/v1/poster.webp","blurhash":"UDATG@-;0000~Boz57RPMwRjtS%MNHs:xZIp","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":24112,"triangles":742,"vertices":996,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-0.05999252194351181,0,-0.05999252194351181],"max":[0.8949999809265137,3.1549993511619627,0.05999252194351181]},"sizeMeters":[0.955,3.155,0.12],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":25,"publishedAt":"2026-09-23T15:10:46.319Z","updatedAt":"2026-10-03T08:20:56.402Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39461/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function WarningFlagPoleBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39461/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39461/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39461/v1/model.glb\" alt=\"Warning Flag Pole (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39461/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39461/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39462","slug":"beach-surf-and-paddle-kit-swim-zone-buoy-orange-36e2fd5e","title":"Swim Zone Buoy Orange (Beach Surf and Paddle Kit)","summary":"Sun yellow variant of the swim zone marker buoy with a coral cross topmark.","description":"Sun yellow variant of the swim zone marker buoy with a coral cross topmark. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-swim-zone-buoy-orange-36e2fd5e","cdnUrl":"https://cdn.3dassets.dev/assets/39462/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-swim-zone-buoy-orange-36e2fd5e","thumbnailUrl":"https://cdn.3dassets.dev/assets/39462/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39462/v1/poster.webp","blurhash":"UDBD4nxa00ELDjWB%fkW9Faf-;kC~pof4pRk","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":46152,"triangles":1400,"vertices":2024,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-0.3100000023841858,0,-0.3100000023841858],"max":[0.3100000023841858,1.4394524171948433,0.3100000023841858]},"sizeMeters":[0.62,1.439,0.62],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":26,"publishedAt":"2026-09-23T15:10:47.798Z","updatedAt":"2026-10-03T09:56:22.492Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39462/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SwimZoneBuoyOrangeBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39462/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39462/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39462/v1/model.glb\" alt=\"Swim Zone Buoy Orange (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39462/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39462/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39463","slug":"beach-surf-and-paddle-kit-stocked-surfboard-rack-59834705","title":"Stocked Surfboard Rack (Beach Surf and Paddle Kit)","summary":"The freestanding surfboard rack stocked for hire: shortboard, fish, soft top learner and longboard standing tail down in the four slots.","description":"The freestanding surfboard rack stocked for hire: shortboard, fish, soft top learner and longboard standing tail down in the four slots. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-stocked-surfboard-rack-59834705","cdnUrl":"https://cdn.3dassets.dev/assets/39463/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-stocked-surfboard-rack-59834705","thumbnailUrl":"https://cdn.3dassets.dev/assets/39463/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39463/v1/poster.webp","blurhash":"U9CPqsXU00-L4:s:xuNG00IU~px^V[s+-ob0","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":306120,"triangles":16828,"vertices":12379,"meshes":8,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-1.2200430537362432,8.940697071579962e-10,-0.4500836029566151],"max":[1.2200430537362432,3,0.4500836029566151]},"sizeMeters":[2.44,3,0.9],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":29,"publishedAt":"2026-09-23T15:10:48.094Z","updatedAt":"2026-10-03T09:56:22.328Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39463/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function StockedSurfboardRackBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39463/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39463/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39463/v1/model.glb\" alt=\"Stocked Surfboard Rack (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39463/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39463/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39464","slug":"beach-surf-and-paddle-kit-surf-cove-base-c5f15a02","title":"Surf Cove Base (Beach Surf and Paddle Kit)","summary":"33 by 22 m surf cove terrain: sand beach running down a wet sand slope into shallow water, broken shore foam and two outer surf lines, a seaweed wrack line, marram topped dune ridge with a plank boardwalk through it, a rocky point and scattered shells.","description":"33 by 22 m surf cove terrain: sand beach running down a wet sand slope into shallow water, broken shore foam and two outer surf lines, a seaweed wrack line, marram topped dune ridge with a plank boardwalk through it, a rocky point and scattered shells. Surf cove palette: sand, shallow water blue, foam white, coral, sun yellow, lagoon teal and deep navy with weathered timber, charcoal rubber, brushed steel and clear glazing. Metres, +Y up, +Z front, origin at ground contact. Static CC0 geometry created with AI assistance. No animation, collision, lighting or gameplay logic.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-surf-cove-base-c5f15a02","cdnUrl":"https://cdn.3dassets.dev/assets/39464/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-surf-cove-base-c5f15a02","thumbnailUrl":"https://cdn.3dassets.dev/assets/39464/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39464/v1/poster.webp","blurhash":"UAC%EUtn00s.$#%LS6IV00Z}~pNG9}9G#k-o","category":{"slug":"nature","title":"Nature & Landscape"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":344140,"triangles":15752,"vertices":15212,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-17.200000762939453,-0.000039638749563697395,-11.689229214031723],"max":[16.979999542236328,1.540039600602591,11.000959598858383]},"sizeMeters":[34.18,1.54,22.69],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":30,"publishedAt":"2026-09-23T15:10:48.846Z","updatedAt":"2026-10-03T08:20:56.411Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39464/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurfCoveBaseBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39464/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39464/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39464/v1/model.glb\" alt=\"Surf Cove Base (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39464/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39464/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"39465","slug":"beach-surf-and-paddle-kit-surf-beach-cov-c569902d-starter-scene","title":"Surf Beach Cove (Beach Surf and Paddle Kit)","summary":"A busy surf beach cove: lifeguard tower and patrol flags, a hire hut with stocked board racks, shower and changing tents, sunbathers under umbrellas with towels, chairs and coolers, a volleyball court and sand castle, and paddleboards, a kayak and a jet ski inside the buoyed...","description":"A busy surf beach cove: lifeguard tower and patrol flags, a hire hut with stocked board racks, shower and changing tents, sunbathers under umbrellas with towels, chairs and coolers, a volleyball court and sand castle, and paddleboards, a kayak and a jet ski inside the buoyed swim zone.","status":"published","url":"https://3dassets.dev/assets/beach-surf-and-paddle-kit-surf-beach-cov-c569902d-starter-scene","cdnUrl":"https://cdn.3dassets.dev/assets/39465/v1/model.glb","downloadUrl":"https://3dassets.dev/download/beach-surf-and-paddle-kit-surf-beach-cov-c569902d-starter-scene","thumbnailUrl":"https://cdn.3dassets.dev/assets/39465/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/39465/v1/poster.webp","blurhash":"UACZeHtl00ovH?%2tSM|00R4~Vb0?^9tVr-U","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"modern","title":"Modern"},{"slug":"stylized","title":"Stylized"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":4127016,"triangles":208396,"vertices":182135,"meshes":248,"materials":13,"textures":0,"animations":[],"boundingBox":{"min":[-17.200000762939453,-0.065,-11.689229214031723],"max":[16.979999542236328,6.477625179290771,11.000959598858383]},"sizeMeters":[34.18,6.543,22.69],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_materials_transmission","KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Opus 5.5","downloads":58,"publishedAt":"2026-09-23T15:10:50.424Z","updatedAt":"2026-10-03T09:56:21.778Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/39465/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SurfBeachCoveBeachSurfAndPaddleKit(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/39465/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/39465/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/39465/v1/model.glb\" alt=\"Surf Beach Cove (Beach Surf and Paddle Kit)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/39465/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/39465/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}}],"demo":null}}