{"data":{"id":135,"slug":"arcology-towers-and-skyways","title":"Sci-Fi City Towers and Skyways","summary":"A stackable future-city block: tower sections on an 8 m grid, skybridges and junctions, an elevated maglev line with a switch, and a street deck with its furniture.","description":"A bright, optimistic arcology kit in metre units. Twelve tower sections stack on a documented 8 m grid over a 16 m square plan, from a colonnaded podium through residential, terraced garden, setback, mechanical, atrium, cantilever, corner, spire and service core modules to a mast crown and an aerial landing deck. Skybridges dock on flush coupling collars 4 m above each section base: straight, curved, glazed tube and open trellis spans, four way and tee junction pods, a level climbing escalator link and a tower coupling adaptor. An elevated maglev line adds guideway straights, a quarter curve, a diverging switch with a movable point blade, support pylons, an elevated station and two car types. A street deck of 8 m tiles carries plaza furniture, and a utilities set adds vent stacks, turbines, water, drone hardware and planting. Three composed scenes show a three tower block, a deck plaza and every connector case. Static CC0 geometry prepared for human review.","url":"https://3dassets.dev/packs/arcology-towers-and-skyways","coverUrl":"https://cdn.3dassets.dev/assets/23281/v1/poster.webp","assetCount":50,"aiGenerated":true,"aiGeneratedAssetCount":50,"aiModels":["Claude Fable 5.1"],"aiModelUnspecifiedCount":0,"featured":true,"licenseLabel":"CC0 1.0 Universal","totalBytes":6886628,"totalTriangles":143416,"starterScene":{"id":"23281","slug":"arcology-towers-and-skyways-three-tower--b27ca724-starter-scene","title":"Three Tower Arcology Block (Sci-Fi City Towers and Skyways)","summary":"A whole arcology block: three towers stacked from podium to crown on the 8 m grid with residential, garden terrace, mechanical, atrium, cantilever, setback, spire and corner sections; three skybridge runs on the tower coupling collars including a four-way junction pod and a...","description":"A whole arcology block: three towers stacked from podium to crown on the 8 m grid with residential, garden terrace, mechanical, atrium, cantilever, setback, spire and corner sections; three skybridge runs on the tower coupling collars including a four-way junction pod and a glazed tube stub; and an elevated maglev line on six pylons carrying a station, a quarter curve, a diverging switch and a three car train. Layout artifact composed from instances of this pack; static geometry only.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-three-tower--b27ca724-starter-scene","cdnUrl":"https://cdn.3dassets.dev/assets/23281/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-three-tower--b27ca724-starter-scene","thumbnailUrl":"https://cdn.3dassets.dev/assets/23281/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23281/v1/poster.webp","blurhash":"UDBzOaxt00WB9FRjt8WA00of_3ay_Nt7Rit8","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":1743196,"triangles":38174,"vertices":89159,"meshes":202,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-18.944688336021983,-0.00017929800127852724,-82.20000004768372],"max":[66.5124974149986,63.31999969482422,58.339907528916285]},"sizeMeters":[85.457,63.32,140.54],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":29,"publishedAt":"2026-09-07T20:07:44.451Z","updatedAt":"2026-10-25T16:40:16.697Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23281/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ThreeTowerArcologyBlockSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23281/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23281/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23281/v1/model.glb\" alt=\"Three Tower Arcology Block (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23281/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23281/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},"assets":[{"id":"23234","slug":"arcology-towers-and-skyways-podium-base-9476a49a","title":"Arcology Podium Base (Sci-Fi City Towers and Skyways)","summary":"A 24 m square arcology podium: paved plinth, twelve-column public arcade around a glazed lobby, a planted roof terrace with parapet, and a 16 m square stack collar that carries the tower above.","description":"A 24 m square arcology podium: paved plinth, twelve-column public arcade around a glazed lobby, a planted roof terrace with parapet, and a 16 m square stack collar that carries the tower above. Bounding size 24.00 x 8.04 x 24.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00. Ground module of a tower stack: it has a stack-top port only in practice, the stack-bottom port marks the ground plane. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-podium-base-9476a49a","cdnUrl":"https://cdn.3dassets.dev/assets/23234/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-podium-base-9476a49a","thumbnailUrl":"https://cdn.3dassets.dev/assets/23234/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23234/v1/poster.webp","blurhash":"U6EylG_300IUMyV@R*oz00D%~qaeOBt7?HV@","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":83692,"triangles":1668,"vertices":5004,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-12,0.000596732227686747,-12],"max":[12,8.045138714060078,12]},"sizeMeters":[24,8.045,24],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:32.413Z","updatedAt":"2026-10-25T12:44:56.559Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23234/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ArcologyPodiumBaseSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23234/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23234/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23234/v1/model.glb\" alt=\"Arcology Podium Base (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23234/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23234/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23235","slug":"arcology-towers-and-skyways-residential-section-31219788","title":"Residential Tower Section (Sci-Fi City Towers and Skyways)","summary":"A standard 8 m arcology residential section on the 16 m grid: full-height glazing between floor bands, four vertical shading fins per face, corner balconies and a skybridge coupling collar on all four faces.","description":"A standard 8 m arcology residential section on the 16 m grid: full-height glazing between floor bands, four vertical shading fins per face, corner balconies and a skybridge coupling collar on all four faces. Bounding size 16.68 x 8.00 x 17.90 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00; bridge-north (bridge) at 0.00, 4.00, 8.00; bridge-south (bridge) at 0.00, 4.00, -8.00; bridge-east (bridge) at 8.00, 4.00, 0.00; bridge-west (bridge) at -8.00, 4.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-residential-section-31219788","cdnUrl":"https://cdn.3dassets.dev/assets/23235/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-residential-section-31219788","thumbnailUrl":"https://cdn.3dassets.dev/assets/23235/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23235/v1/poster.webp","blurhash":"U9H2p2?b00NG~qadIUj]00Mxo#jF00t8%1Rj","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":44072,"triangles":852,"vertices":2556,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-8.340349869561173,-0.00014487767229054427,-8.949999809265137],"max":[8.340349869561173,8.00014487767229,8.949999809265137]},"sizeMeters":[16.681,8,17.9],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:32.422Z","updatedAt":"2026-10-05T03:25:38.979Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23235/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ResidentialTowerSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23235/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23235/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23235/v1/model.glb\" alt=\"Residential Tower Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23235/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23235/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23239","slug":"arcology-towers-and-skyways-terraced-garden-section-7543f8b9","title":"Terraced Garden Section (Sci-Fi City Towers and Skyways)","summary":"An 8 m arcology section whose body is set back 5 m to leave a planted sky terrace: paved deck, three planters, two trees, a glass and alloy edge rail and a hanging vine curtain, with skybridge collars on three faces.","description":"An 8 m arcology section whose body is set back 5 m to leave a planted sky terrace: paved deck, three planters, two trees, a glass and alloy edge rail and a hanging vine curtain, with skybridge collars on three faces. Bounding size 16.00 x 8.00 x 16.13 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00; bridge-south (bridge) at 0.00, 4.00, -8.00; bridge-east (bridge) at 8.00, 4.00, 0.00; bridge-west (bridge) at -8.00, 4.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-terraced-garden-section-7543f8b9","cdnUrl":"https://cdn.3dassets.dev/assets/23239/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-terraced-garden-section-7543f8b9","thumbnailUrl":"https://cdn.3dassets.dev/assets/23239/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23239/v1/poster.webp","blurhash":"U9GSW8Im00D%~XIo9Yn~00%NyDxu4-?H=}Si","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":93876,"triangles":1828,"vertices":5484,"meshes":8,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-8.001199722290039,-0.0006103701895203706,-8.001615710809581],"max":[8.001199722290039,8.00061037018952,8.131233513229741]},"sizeMeters":[16.002,8.001,16.133],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:33.515Z","updatedAt":"2026-10-25T10:23:09.546Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23239/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function TerracedGardenSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23239/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23239/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23239/v1/model.glb\" alt=\"Terraced Garden Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23239/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23239/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23237","slug":"arcology-towers-and-skyways-setback-transition-21c227b3","title":"Setback Transition Section (Sci-Fi City Towers and Skyways)","summary":"An 8 m transition section that steps a 16 m tower plan down to 11.6 m in two setbacks, each with a railed roof terrace and planters, so a slim shaft can continue above a wide shaft.","description":"An 8 m transition section that steps a 16 m tower plan down to 11.6 m in two setbacks, each with a railed roof terrace and planters, so a slim shaft can continue above a wide shaft. Bounding size 16.00 x 8.00 x 16.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-setback-transition-21c227b3","cdnUrl":"https://cdn.3dassets.dev/assets/23237/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-setback-transition-21c227b3","thumbnailUrl":"https://cdn.3dassets.dev/assets/23237/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23237/v1/poster.webp","blurhash":"U8FPW._300IUMdRQIVt700D%%Nj]OstR~pf5","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":57588,"triangles":1104,"vertices":3312,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-8,-0.0006103701895203706,-8],"max":[8,8.00061037018952,8]},"sizeMeters":[16,8.001,16],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":8,"publishedAt":"2026-09-07T20:07:32.455Z","updatedAt":"2026-10-25T12:37:45.571Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23237/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SetbackTransitionSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23237/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23237/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23237/v1/model.glb\" alt=\"Setback Transition Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23237/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23237/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23238","slug":"arcology-towers-and-skyways-mechanical-floor-387bc63c","title":"Mechanical Plant Section (Sci-Fi City Towers and Skyways)","summary":"An 8 m plant section: a louvred air-handling floor wrapping a teal service core, three roof fan units on a maintenance deck, a riser duct and an intake box on the front face.","description":"An 8 m plant section: a louvred air-handling floor wrapping a teal service core, three roof fan units on a maintenance deck, a riser duct and an intake box on the front face. Bounding size 16.00 x 7.98 x 17.44 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-mechanical-floor-387bc63c","cdnUrl":"https://cdn.3dassets.dev/assets/23238/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-mechanical-floor-387bc63c","thumbnailUrl":"https://cdn.3dassets.dev/assets/23238/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23238/v1/poster.webp","blurhash":"U9FY.Ixt00M{~qj@M{t700WBxubH00Rj%LRj","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":52584,"triangles":1016,"vertices":3048,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-8,0.00023051011397523524,-8.140000343322754],"max":[8,7.9804188196372845,9.300000190734863]},"sizeMeters":[16,7.98,17.44],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:32.474Z","updatedAt":"2026-10-25T07:59:38.016Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23238/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MechanicalPlantSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23238/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23238/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23238/v1/model.glb\" alt=\"Mechanical Plant Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23238/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23238/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23240","slug":"arcology-towers-and-skyways-atrium-section-5f9a476a","title":"Atrium Sky Garden Section (Sci-Fi City Towers and Skyways)","summary":"An 8 m section split into two glazed piers around a full-depth atrium: a planted garden floor, two crossing walkways at different levels and a ribbed glass barrel vault, with skybridge collars on the east and west piers.","description":"An 8 m section split into two glazed piers around a full-depth atrium: a planted garden floor, two crossing walkways at different levels and a ribbed glass barrel vault, with skybridge collars on the east and west piers. Bounding size 16.00 x 8.00 x 16.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00; bridge-east (bridge) at 8.00, 4.00, 0.00; bridge-west (bridge) at -8.00, 4.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-atrium-section-5f9a476a","cdnUrl":"https://cdn.3dassets.dev/assets/23240/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-atrium-section-5f9a476a","thumbnailUrl":"https://cdn.3dassets.dev/assets/23240/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23240/v1/poster.webp","blurhash":"U8G+p{~W00RQ~qWAIUxt00E1IUE10KxunOE2","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":127604,"triangles":2536,"vertices":7608,"meshes":8,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-8.001199722290039,-0.0006103701895203706,-8],"max":[8.001199722290039,8.00061037018952,8]},"sizeMeters":[16.002,8.001,16],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:32.503Z","updatedAt":"2026-10-25T11:05:19.587Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23240/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function AtriumSkyGardenSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23240/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23240/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23240/v1/model.glb\" alt=\"Atrium Sky Garden Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23240/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23240/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23241","slug":"arcology-towers-and-skyways-offset-cantilever-section-42ae421c","title":"Offset Cantilever Section (Sci-Fi City Towers and Skyways)","summary":"An 8 m section whose lower half is a half-width pier and whose upper half is a full 16 m plate cantilevered over it on two teal outriggers, giving a stack a deliberate horizontal jog.","description":"An 8 m section whose lower half is a half-width pier and whose upper half is a full 16 m plate cantilevered over it on two teal outriggers, giving a stack a deliberate horizontal jog. Bounding size 16.60 x 8.00 x 17.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-offset-cantilever-section-42ae421c","cdnUrl":"https://cdn.3dassets.dev/assets/23241/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-offset-cantilever-section-42ae421c","thumbnailUrl":"https://cdn.3dassets.dev/assets/23241/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23241/v1/poster.webp","blurhash":"UKF?66.800M{~qNGD%oz00IUxuof00%MxaRP","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":31420,"triangles":572,"vertices":1716,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-8.299737540818507,-0.0003204443494984055,-8.300000190734863],"max":[8.299737540818507,8.000320444349498,8.699999809265137]},"sizeMeters":[16.599,8.001,17],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:33.825Z","updatedAt":"2026-10-25T13:56:27.564Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23241/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function OffsetCantileverSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23241/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23241/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23241/v1/model.glb\" alt=\"Offset Cantilever Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23241/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23241/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23236","slug":"arcology-towers-and-skyways-corner-tower-section-7f4ec928","title":"Corner Tower Section (Sci-Fi City Towers and Skyways)","summary":"An 8 m L-plan section that turns a tower block corner: two glazed wings meeting at a glazed stair drum, shading fins on the long face, a balcony and skybridge collars on the south and west faces.","description":"An 8 m L-plan section that turns a tower block corner: two glazed wings meeting at a glazed stair drum, shading fins on the long face, a balcony and skybridge collars on the south and west faces. Bounding size 16.30 x 8.06 x 17.25 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00; bridge-south (bridge) at 0.00, 4.00, -8.00; bridge-west (bridge) at -8.00, 4.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-corner-tower-section-7f4ec928","cdnUrl":"https://cdn.3dassets.dev/assets/23236/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-corner-tower-section-7f4ec928","thumbnailUrl":"https://cdn.3dassets.dev/assets/23236/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23236/v1/poster.webp","blurhash":"UFFPmRxa8_$*~qayD%WB00NaNHNG4.kCxuof","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":41364,"triangles":792,"vertices":2376,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-8.300147347175653,-0.00018692587054092158,-8.300000190734863],"max":[8.00014715644079,8.059789345746626,8.949999809265137]},"sizeMeters":[16.3,8.06,17.25],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:32.438Z","updatedAt":"2026-10-05T07:49:02.938Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23236/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CornerTowerSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23236/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23236/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23236/v1/model.glb\" alt=\"Corner Tower Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23236/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23236/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23246","slug":"arcology-towers-and-skyways-slim-spire-section-ea4ea933","title":"Slim Spire Section (Sci-Fi City Towers and Skyways)","summary":"An 8 m octagonal spire section, 10.8 m across the corners at the base and tapering to 9 m, with a glazed shaft, eight alloy corner ribs and a teal cornice ring.","description":"An 8 m octagonal spire section, 10.8 m across the corners at the base and tapering to 9 m, with a glazed shaft, eight alloy corner ribs and a teal cornice ring. Bounding size 10.80 x 8.02 x 10.80 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-slim-spire-section-ea4ea933","cdnUrl":"https://cdn.3dassets.dev/assets/23246/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-slim-spire-section-ea4ea933","thumbnailUrl":"https://cdn.3dassets.dev/assets/23246/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23246/v1/poster.webp","blurhash":"U8GSGo_200D%-=WBDibH00IB~qxu%1t7tRRj","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":23140,"triangles":416,"vertices":1248,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-5.400000095367432,0.00030511445760739164,-5.400000095367432],"max":[5.400000095367432,8.017887707765453,5.400000095367432]},"sizeMeters":[10.8,8.018,10.8],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":7,"publishedAt":"2026-09-07T20:07:34.407Z","updatedAt":"2026-10-05T21:07:13.247Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23246/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SlimSpireSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23246/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23246/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23246/v1/model.glb\" alt=\"Slim Spire Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23246/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23246/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23242","slug":"arcology-towers-and-skyways-service-core-shaft-fa8c94bf","title":"Service Core Shaft Section (Sci-Fi City Towers and Skyways)","summary":"An 8 m slim service core: a 6.4 m square shaft with a riser slot, two external glazed lift tubes with alloy collars and landing rings, and teal cable ladders, for use as a standalone circulation stack.","description":"An 8 m slim service core: a 6.4 m square shaft with a riser slot, two external glazed lift tubes with alloy collars and landing rings, and teal cable ladders, for use as a standalone circulation stack. Bounding size 9.36 x 8.00 x 7.05 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00; stack-top (stack) at 0.00, 8.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-service-core-shaft-fa8c94bf","cdnUrl":"https://cdn.3dassets.dev/assets/23242/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-service-core-shaft-fa8c94bf","thumbnailUrl":"https://cdn.3dassets.dev/assets/23242/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23242/v1/poster.webp","blurhash":"UCGc0~_N00R5~Wt7E1W.00IUbwR*X9kCnijY","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":46460,"triangles":888,"vertices":2664,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-4.679999828338623,-0.00008753520632520662,-3.450235137155954],"max":[4.679999828338623,8.00248793346072,3.6001275710980516]},"sizeMeters":[9.36,8.003,7.05],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:34.139Z","updatedAt":"2026-10-25T11:03:02.653Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23242/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ServiceCoreShaftSectionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23242/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23242/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23242/v1/model.glb\" alt=\"Service Core Shaft Section (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23242/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23242/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23243","slug":"arcology-towers-and-skyways-crown-mast-56940e41","title":"Tower Crown with Mast (Sci-Fi City Towers and Skyways)","summary":"A tower crown that closes a stack: a stepped cap, a railed observation gallery in glass and a 10 m tapered communications mast on four teal struts with a glowing beacon.","description":"A tower crown that closes a stack: a stepped cap, a railed observation gallery in glass and a 10 m tapered communications mast on four teal struts with a glowing beacon. Bounding size 16.00 x 15.32 x 16.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-crown-mast-56940e41","cdnUrl":"https://cdn.3dassets.dev/assets/23243/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-crown-mast-56940e41","thumbnailUrl":"https://cdn.3dassets.dev/assets/23243/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23243/v1/poster.webp","blurhash":"UMD]rGxu00Rj00Rj%MofIAayogWU~qofoJof","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":39672,"triangles":748,"vertices":2244,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-8,-0.00011906987067211716,-8],"max":[8,15.319999694824219,8]},"sizeMeters":[16,15.32,16],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:34.157Z","updatedAt":"2026-10-13T10:16:23.155Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23243/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function TowerCrownWithMastSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23243/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23243/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23243/v1/model.glb\" alt=\"Tower Crown with Mast (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23243/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23243/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23247","slug":"arcology-towers-and-skyways-crown-landing-deck-577847f1","title":"Tower Crown with Landing Deck (Sci-Fi City Towers and Skyways)","summary":"A tower crown carrying an 18 m circular aerial landing deck: paved disc with an amber touchdown circle and cross, twelve edge lights, a glazed control pod on a stalk and a beacon mast.","description":"A tower crown carrying an 18 m circular aerial landing deck: paved disc with an amber touchdown circle and cross, twelve edge lights, a glazed control pod on a stalk and a beacon mast. Bounding size 18.00 x 9.10 x 18.90 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: stack-bottom (stack) at 0.00, 0.00, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-crown-landing-deck-577847f1","cdnUrl":"https://cdn.3dassets.dev/assets/23247/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-crown-landing-deck-577847f1","thumbnailUrl":"https://cdn.3dassets.dev/assets/23247/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23247/v1/poster.webp","blurhash":"UJECqHt700xu4.M{%Lxu00WB?ZRi~p%MNJM{","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":86320,"triangles":1688,"vertices":5064,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-9,-0.0001921560539699385,-9.899999618530273],"max":[9,9.099735922422248,9]},"sizeMeters":[18,9.1,18.9],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":14,"publishedAt":"2026-09-07T20:07:34.421Z","updatedAt":"2026-10-25T07:01:05.756Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23247/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function TowerCrownWithLandingDeckSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23247/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23247/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23247/v1/model.glb\" alt=\"Tower Crown with Landing Deck (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23247/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23247/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23245","slug":"arcology-towers-and-skyways-skybridge-straight-span-35041748","title":"Straight Skybridge Span (Sci-Fi City Towers and Skyways)","summary":"A 24 m enclosed skybridge span: a 4.8 m wide walking deck, glazed side walls with alloy diagonal bracing, a parabolic roof shell and a teal portal frame at each end.","description":"A 24 m enclosed skybridge span: a 4.8 m wide walking deck, glazed side walls with alloy diagonal bracing, a parabolic roof shell and a teal portal frame at each end. Bounding size 5.10 x 4.20 x 24.06 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-a (bridge) at 0.00, 2.10, -12.00; bridge-b (bridge) at 0.00, 2.10, 12.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-skybridge-straight-span-35041748","cdnUrl":"https://cdn.3dassets.dev/assets/23245/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-skybridge-straight-span-35041748","thumbnailUrl":"https://cdn.3dassets.dev/assets/23245/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23245/v1/poster.webp","blurhash":"UFD0fWoz4.kCxuDORj%200RP?bs.E1_NxuE1","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":51848,"triangles":984,"vertices":2952,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-2.5503707998901337,0.00017303041198557523,-12.057838439941406],"max":[2.5503707998901337,4.199394930364753,12.002400398254395]},"sizeMeters":[5.101,4.199,24.06],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:34.284Z","updatedAt":"2026-10-25T10:52:14.833Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23245/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function StraightSkybridgeSpanSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23245/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23245/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23245/v1/model.glb\" alt=\"Straight Skybridge Span (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23245/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23245/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23244","slug":"arcology-towers-and-skyways-skybridge-straight-span-sh-2756c048","title":"Short Skybridge Span (Sci-Fi City Towers and Skyways)","summary":"A 12 m enclosed skybridge span sharing the standard 4.8 by 4.2 m skyway section, for closing short gaps between adjacent towers or junction pods.","description":"A 12 m enclosed skybridge span sharing the standard 4.8 by 4.2 m skyway section, for closing short gaps between adjacent towers or junction pods. Bounding size 5.10 x 4.20 x 12.06 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-a (bridge) at 0.00, 2.10, -6.00; bridge-b (bridge) at 0.00, 2.10, 6.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-skybridge-straight-span-sh-2756c048","cdnUrl":"https://cdn.3dassets.dev/assets/23244/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-skybridge-straight-span-sh-2756c048","thumbnailUrl":"https://cdn.3dassets.dev/assets/23244/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23244/v1/poster.webp","blurhash":"U8Ey-?t,00t,-;4TIU.S00Md~Ws.0L?^?bNG","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":35024,"triangles":632,"vertices":1896,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-2.5498214667195658,-0.000010080644870402722,-6.0578389167785645],"max":[2.5498214667195658,4.199788114813339,6.002399921417236]},"sizeMeters":[5.1,4.2,12.06],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:34.212Z","updatedAt":"2026-10-25T12:18:17.671Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23244/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ShortSkybridgeSpanSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23244/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23244/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23244/v1/model.glb\" alt=\"Short Skybridge Span (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23244/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23244/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23248","slug":"arcology-towers-and-skyways-skybridge-curved-span-c49c5f66","title":"Curved Skybridge Span (Sci-Fi City Towers and Skyways)","summary":"A quarter-turn glazed skybridge on a 12 m radius: a swept 4.8 by 4.2 m tube with an internal deck and alloy hoop ribs, turning a run through 90 degrees between a south-facing and a west-facing tower port.","description":"A quarter-turn glazed skybridge on a 12 m radius: a swept 4.8 by 4.2 m tube with an internal deck and alloy hoop ribs, turning a run through 90 degrees between a south-facing and a west-facing tower port. Bounding size 14.66 x 4.20 x 14.63 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-a (bridge) at 0.00, 2.10, -6.00; bridge-b (bridge) at -12.00, 2.10, 6.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-skybridge-curved-span-c49c5f66","cdnUrl":"https://cdn.3dassets.dev/assets/23248/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-skybridge-curved-span-c49c5f66","thumbnailUrl":"https://cdn.3dassets.dev/assets/23248/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23248/v1/poster.webp","blurhash":"U5BW_F.800o~NdWB%ft700Di~qVs#+t7DiM{","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":93300,"triangles":1874,"vertices":5622,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-12.09510612487793,0.000009046277721580509,-6.080778132764283],"max":[2.564957857131958,4.2015409191321,8.550652037946168]},"sizeMeters":[14.66,4.202,14.631],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:35.465Z","updatedAt":"2026-10-25T12:19:52.541Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23248/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function CurvedSkybridgeSpanSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23248/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23248/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23248/v1/model.glb\" alt=\"Curved Skybridge Span (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23248/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23248/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23249","slug":"arcology-towers-and-skyways-skyway-junction-pod-four-w-8baff99f","title":"Four-Way Skyway Junction Pod (Sci-Fi City Towers and Skyways)","summary":"A 12 m square glazed skyway junction with a domed roof: four standard bridge portals on the cardinal faces, a paved interior with planters and benches, four alloy columns and a glowing eaves ring.","description":"A 12 m square glazed skyway junction with a domed roof: four standard bridge portals on the cardinal faces, a paved interior with planters and benches, four alloy columns and a glowing eaves ring. Bounding size 12.00 x 5.80 x 12.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-north (bridge) at 0.00, 2.10, 6.00; bridge-east (bridge) at 6.00, 2.10, 0.00; bridge-south (bridge) at 0.00, 2.10, -6.00; bridge-west (bridge) at -6.00, 2.10, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-skyway-junction-pod-four-w-8baff99f","cdnUrl":"https://cdn.3dassets.dev/assets/23249/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-skyway-junction-pod-four-w-8baff99f","thumbnailUrl":"https://cdn.3dassets.dev/assets/23249/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23249/v1/poster.webp","blurhash":"U5EWL2_N00NF8wIo%M%200Di.SVsK5%M%MIn","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":80188,"triangles":1544,"vertices":4632,"meshes":8,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-6.001200199127197,0.00014727565007910393,-6.001200199127197],"max":[6.001200199127197,5.79962327890911,6.001200199127197]},"sizeMeters":[12.002,5.799,12.002],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":14,"publishedAt":"2026-09-07T20:07:36.695Z","updatedAt":"2026-10-13T11:33:52.533Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23249/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function FourWaySkywayJunctionPodSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23249/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23249/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23249/v1/model.glb\" alt=\"Four-Way Skyway Junction Pod (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23249/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23249/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23250","slug":"arcology-towers-and-skyways-skyway-junction-tee-3a17db32","title":"Tee Skyway Junction (Sci-Fi City Towers and Skyways)","summary":"A 10 by 9 m glazed tee junction with a barrel-vaulted roof: bridge portals on the south, east and west faces, a planted rest bay on the closed north side and alloy portal columns.","description":"A 10 by 9 m glazed tee junction with a barrel-vaulted roof: bridge portals on the south, east and west faces, a planted rest bay on the closed north side and alloy portal columns. Bounding size 10.40 x 4.55 x 10.60 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-south (bridge) at 0.00, 2.10, -4.50; bridge-east (bridge) at 5.00, 2.10, 0.00; bridge-west (bridge) at -5.00, 2.10, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-skyway-junction-tee-3a17db32","cdnUrl":"https://cdn.3dassets.dev/assets/23250/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-skyway-junction-tee-3a17db32","thumbnailUrl":"https://cdn.3dassets.dev/assets/23250/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23250/v1/poster.webp","blurhash":"U6GI.Z_N00Rj^+9ZE1^k009F?ba000^+^k56","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":40452,"triangles":714,"vertices":2142,"meshes":8,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-5.199716131080404,0.000013086201852363644,-4.900000095367432],"max":[5.199716131080404,4.549987104533011,5.699999809265137]},"sizeMeters":[10.399,4.55,10.6],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":8,"publishedAt":"2026-09-07T20:07:35.915Z","updatedAt":"2026-10-05T07:46:22.666Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23250/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function TeeSkywayJunctionSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23250/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23250/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23250/v1/model.glb\" alt=\"Tee Skyway Junction (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23250/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23250/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23252","slug":"arcology-towers-and-skyways-bridge-to-tower-coupling-058d71e7","title":"Skybridge to Tower Coupling (Sci-Fi City Towers and Skyways)","summary":"A 4 m coupling adaptor that lands a skyway run on a tower collar: a splayed teal landing flange with an alloy seal plate, a short glazed vestibule, a services cabinet and a riser drum.","description":"A 4 m coupling adaptor that lands a skyway run on a tower collar: a splayed teal landing flange with an alloy seal plate, a short glazed vestibule, a services cabinet and a riser drum. Bounding size 6.67 x 4.20 x 4.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-in (bridge) at 0.00, 2.10, -2.00; bridge-out (bridge) at 0.00, 2.10, 2.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-bridge-to-tower-coupling-058d71e7","cdnUrl":"https://cdn.3dassets.dev/assets/23252/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-bridge-to-tower-coupling-058d71e7","thumbnailUrl":"https://cdn.3dassets.dev/assets/23252/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23252/v1/poster.webp","blurhash":"UDEpvM%g00Hr_NxGD%S200Rj$*o#4.x]%1D%","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":17132,"triangles":268,"vertices":804,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-3.3370964527130127,-0.0001110722359642935,-2.0013110329445825],"max":[3.3370964527130127,4.199825918786885,1.9999206229772872]},"sizeMeters":[6.674,4.2,4.001],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:35.969Z","updatedAt":"2026-10-25T07:36:14.546Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23252/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function SkybridgeToTowerCouplingSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23252/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23252/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23252/v1/model.glb\" alt=\"Skybridge to Tower Coupling (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23252/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23252/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23251","slug":"arcology-towers-and-skyways-glazed-tube-span-b2f1c99a","title":"Glazed Tube Skyway Span (Sci-Fi City Towers and Skyways)","summary":"A 20 m fully glazed circular skyway tube on the standard 4.2 m section: nine alloy hoop ribs, a raised walking deck with handrails and a floor light run, ending in standard portal frames.","description":"A 20 m fully glazed circular skyway tube on the standard 4.2 m section: nine alloy hoop ribs, a raised walking deck with handrails and a floor light run, ending in standard portal frames. Bounding size 4.80 x 4.20 x 20.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-a (bridge) at 0.00, 2.10, -10.00; bridge-b (bridge) at 0.00, 2.10, 10.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-glazed-tube-span-b2f1c99a","cdnUrl":"https://cdn.3dassets.dev/assets/23251/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-glazed-tube-span-b2f1c99a","thumbnailUrl":"https://cdn.3dassets.dev/assets/23251/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23251/v1/poster.webp","blurhash":"UDA-SBt79txuo#DOWAxu00RP-;WVV??^o#IU","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":98576,"triangles":1968,"vertices":5904,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-2.40026351561293,0.00007455017975077638,-10.001199722290039],"max":[2.40026351561293,4.199925259085386,10.001199722290039]},"sizeMeters":[4.801,4.2,20.002],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:36.985Z","updatedAt":"2026-10-25T16:04:44.939Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23251/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function GlazedTubeSkywaySpanSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23251/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23251/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23251/v1/model.glb\" alt=\"Glazed Tube Skyway Span (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23251/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23251/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23253","slug":"arcology-towers-and-skyways-open-trellis-span-d8a537c5","title":"Open Trellis Skyway Span (Sci-Fi City Towers and Skyways)","summary":"A 24 m open-air skyway span on the standard section: a planted walking deck between twelve edge planters, alloy handrails, seven teal trellis arches with longitudinal runners and trained climbing greenery.","description":"A 24 m open-air skyway span on the standard section: a planted walking deck between twelve edge planters, alloy handrails, seven teal trellis arches with longitudinal runners and trained climbing greenery. Bounding size 4.83 x 4.20 x 24.13 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-a (bridge) at 0.00, 2.10, -12.00; bridge-b (bridge) at 0.00, 2.10, 12.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-open-trellis-span-d8a537c5","cdnUrl":"https://cdn.3dassets.dev/assets/23253/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-open-trellis-span-d8a537c5","thumbnailUrl":"https://cdn.3dassets.dev/assets/23253/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23253/v1/poster.webp","blurhash":"UDA^{}bv9Zg3NaDOsoxu00r?-;Rk-U?^NuIU","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":204112,"triangles":4172,"vertices":12516,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-2.41291249642771,-0.0004959257789849403,-12.056631088256836],"max":[2.41291249642771,4.199394930364753,12.069999694824219]},"sizeMeters":[4.826,4.2,24.127],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:37.144Z","updatedAt":"2026-10-06T17:34:17.075Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23253/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function OpenTrellisSkywaySpanSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23253/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23253/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23253/v1/model.glb\" alt=\"Open Trellis Skyway Span (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23253/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23253/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23255","slug":"arcology-towers-and-skyways-transit-escalator-link-93e45179","title":"Transit Escalator Link (Sci-Fi City Towers and Skyways)","summary":"An 18 m open escalator link that climbs one 8 m tower level: amber tread runs with alloy nosings on a smooth S profile incline, glass balustrades under teal moving handrails, a lit canopy on alloy posts, flat landings at each end and standard bridge portals 8 m apart in height.","description":"An 18 m open escalator link that climbs one 8 m tower level: amber tread runs with alloy nosings on a smooth S profile incline, glass balustrades under teal moving handrails, a lit canopy on alloy posts, flat landings at each end and standard bridge portals 8 m apart in height. Bounding size 5.04 x 12.20 x 18.11 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: bridge-a (bridge) at 0.00, 2.10, -9.00; bridge-b (bridge) at 0.00, 10.10, 9.00. Use it to move a skyway run from level n to level n+1 of the 8 m tower grid. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-transit-escalator-link-93e45179","cdnUrl":"https://cdn.3dassets.dev/assets/23255/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-transit-escalator-link-93e45179","thumbnailUrl":"https://cdn.3dassets.dev/assets/23255/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23255/v1/poster.webp","blurhash":"U7BzUroz0KtR~q_3IoD%00%M^+D%0000?H-;","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":115440,"triangles":2296,"vertices":6888,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-2.5195165868099,-0.00034495452451110964,-9.001199722290039],"max":[2.5195165868099,12.200344763789648,9.109999656677246]},"sizeMeters":[5.039,12.201,18.111],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:36.214Z","updatedAt":"2026-10-05T09:40:01.926Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23255/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function TransitEscalatorLinkSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23255/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23255/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23255/v1/model.glb\" alt=\"Transit Escalator Link (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23255/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23255/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23254","slug":"arcology-towers-and-skyways-maglev-guideway-straight-85eea8ff","title":"Maglev Guideway Straight (Sci-Fi City Towers and Skyways)","summary":"A 16 m elevated maglev guideway module: a 2.8 m box girder with a paved running surface, teal reaction beams under the flange, amber edge markers, a service light run and three underslung bearing saddles.","description":"A 16 m elevated maglev guideway module: a 2.8 m box girder with a paved running surface, teal reaction beams under the flange, amber edge markers, a service light run and three underslung bearing saddles. Bounding size 3.01 x 1.85 x 16.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: rail-a (rail) at 0.00, 0.80, -8.00; rail-b (rail) at 0.00, 0.80, 8.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-maglev-guideway-straight-85eea8ff","cdnUrl":"https://cdn.3dassets.dev/assets/23254/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-maglev-guideway-straight-85eea8ff","thumbnailUrl":"https://cdn.3dassets.dev/assets/23254/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23254/v1/poster.webp","blurhash":"UHD0Ju%2ITxtxu9FM{t700IU-;flMy~q-pM{","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":22768,"triangles":392,"vertices":1176,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.4999652238194403,0.00016710076031001275,-8],"max":[1.5097722821059283,1.8498329230815478,8]},"sizeMeters":[3.01,1.85,16],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":8,"publishedAt":"2026-09-07T20:07:36.158Z","updatedAt":"2026-10-05T21:07:18.000Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23254/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MaglevGuidewayStraightSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23254/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23254/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23254/v1/model.glb\" alt=\"Maglev Guideway Straight (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23254/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23254/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23256","slug":"arcology-towers-and-skyways-maglev-guideway-straight-s-5b1e53ac","title":"Maglev Guideway Half Straight (Sci-Fi City Towers and Skyways)","summary":"An 8 m maglev guideway module on the same girder section as the full straight, used to close out a run against a station or a switch.","description":"An 8 m maglev guideway module on the same girder section as the full straight, used to close out a run against a station or a switch. Bounding size 3.01 x 1.85 x 8.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: rail-a (rail) at 0.00, 0.80, -4.00; rail-b (rail) at 0.00, 0.80, 4.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-maglev-guideway-straight-s-5b1e53ac","cdnUrl":"https://cdn.3dassets.dev/assets/23256/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-maglev-guideway-straight-s-5b1e53ac","thumbnailUrl":"https://cdn.3dassets.dev/assets/23256/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23256/v1/poster.webp","blurhash":"UDE{qb?b4nxu?b4nD%%M009F%Mt74.~q?HRj","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":17120,"triangles":272,"vertices":816,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.5000552696861114,0.00016710076031001275,-4],"max":[1.5099675996817912,1.8498329230815478,4]},"sizeMeters":[3.01,1.85,8],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":8,"publishedAt":"2026-09-07T20:07:37.279Z","updatedAt":"2026-10-05T21:07:18.101Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23256/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MaglevGuidewayHalfStraightSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23256/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23256/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23256/v1/model.glb\" alt=\"Maglev Guideway Half Straight (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23256/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23256/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23257","slug":"arcology-towers-and-skyways-maglev-guideway-curve-2cf0683a","title":"Maglev Guideway Quarter Curve (Sci-Fi City Towers and Skyways)","summary":"A 16 m radius quarter-turn maglev guideway: the standard box girder swept through 90 degrees with a continuous running surface, teal reaction beams and bearing saddles, turning a line from north-south to east-west.","description":"A 16 m radius quarter-turn maglev guideway: the standard box girder swept through 90 degrees with a continuous running surface, teal reaction beams and bearing saddles, turning a line from north-south to east-west. Bounding size 17.42 x 1.77 x 17.42 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: rail-a (rail) at 0.00, 0.80, -8.00; rail-b (rail) at -16.00, 0.80, 8.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-maglev-guideway-curve-2cf0683a","cdnUrl":"https://cdn.3dassets.dev/assets/23257/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-maglev-guideway-curve-2cf0683a","thumbnailUrl":"https://cdn.3dassets.dev/assets/23257/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23257/v1/poster.webp","blurhash":"U2ATl=~W4Utlv}a}%gxa000e_LR57fjY4TE1","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":68564,"triangles":1344,"vertices":4032,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-16.00119984149933,0.00031723158147134445,-8.001199722290039],"max":[1.4199999570846558,1.7696827493450424,9.418336817449285]},"sizeMeters":[17.421,1.769,17.42],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:37.635Z","updatedAt":"2026-10-05T08:28:40.479Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23257/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MaglevGuidewayQuarterCurveSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23257/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23257/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23257/v1/model.glb\" alt=\"Maglev Guideway Quarter Curve (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23257/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23257/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23258","slug":"arcology-towers-and-skyways-maglev-guideway-switch-ee1105a8","title":"Maglev Guideway Switch (Sci-Fi City Towers and Skyways)","summary":"A 24 m maglev switch module: the through girder plus a diverging branch that settles 5 m to the west and leaves the module parallel to the main line, with a movable amber point blade node, an actuator housing and a status beacon.","description":"A 24 m maglev switch module: the through girder plus a diverging branch that settles 5 m to the west and leaves the module parallel to the main line, with a movable amber point blade node, an actuator housing and a status beacon. Bounding size 7.93 x 2.03 x 24.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Movable parts are separate named nodes with local pivots: point-blade. Assembly ports: rail-a (rail) at 0.00, 0.80, -12.00; rail-b (rail) at 0.00, 0.80, 12.00; rail-branch (rail) at -5.00, 0.80, 12.00. The branch port chains onward exactly like a straight port: a guideway module attached to rail-branch continues the diverging line. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-maglev-guideway-switch-ee1105a8","cdnUrl":"https://cdn.3dassets.dev/assets/23258/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-maglev-guideway-switch-ee1105a8","thumbnailUrl":"https://cdn.3dassets.dev/assets/23258/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23258/v1/poster.webp","blurhash":"UEB|KWxuD*fkWADjfRxu00M|-;WBo#~qocIU","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":90212,"triangles":1768,"vertices":5304,"meshes":7,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-6.419480668334982,0.000655396911925954,-12],"max":[1.5096630672366995,2.029881154814736,12.001199722290039]},"sizeMeters":[7.929,2.029,24.001],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:37.740Z","updatedAt":"2026-10-25T16:54:57.909Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23258/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MaglevGuidewaySwitchSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23258/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23258/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23258/v1/model.glb\" alt=\"Maglev Guideway Switch (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23258/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23258/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23259","slug":"arcology-towers-and-skyways-maglev-support-pylon-a5a236b2","title":"Maglev Support Pylon (Sci-Fi City Towers and Skyways)","summary":"An 11 m elevated maglev support pylon: a tapered square shaft on a paved footing, a Y fork carrying a bearing saddle with teal restraints, and an access ladder. Guideway modules sit directly on the saddle.","description":"An 11 m elevated maglev support pylon: a tapered square shaft on a paved footing, a Y fork carrying a bearing saddle with teal restraints, and an access ladder. Guideway modules sit directly on the saddle. Bounding size 4.40 x 11.15 x 4.54 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. The saddle top is 11.0 m above the pylon base, which is the guideway module base height used across this pack. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-maglev-support-pylon-a5a236b2","cdnUrl":"https://cdn.3dassets.dev/assets/23259/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-maglev-support-pylon-a5a236b2","thumbnailUrl":"https://cdn.3dassets.dev/assets/23259/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23259/v1/poster.webp","blurhash":"U4E3F=_3000000Rk-p%100R*~WxZ_Mt8IARO","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":29632,"triangles":536,"vertices":1608,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-2.200000047683716,0.0000625493992715831,-2.200000047683716],"max":[2.200000047683716,11.14887833438838,2.339907528916288]},"sizeMeters":[4.4,11.149,4.54],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:39.309Z","updatedAt":"2026-10-25T05:24:25.914Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23259/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MaglevSupportPylonSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23259/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23259/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23259/v1/model.glb\" alt=\"Maglev Support Pylon (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23259/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23259/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23260","slug":"arcology-towers-and-skyways-maglev-station-platform-po-032e8532","title":"Maglev Station Platform Pod (Sci-Fi City Towers and Skyways)","summary":"A 16 m elevated maglev station module: the through guideway with a side platform each way on alloy brackets, glazed platform screen doors, amber edge strips, a lit canopy on columns, benches, planters and a name band.","description":"A 16 m elevated maglev station module: the through guideway with a side platform each way on alloy brackets, glazed platform screen doors, amber edge strips, a lit canopy on columns, benches, planters and a name band. Bounding size 10.40 x 5.98 x 16.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: rail-a (rail) at 0.00, 0.80, -8.00; rail-b (rail) at 0.00, 0.80, 8.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-maglev-station-platform-po-032e8532","cdnUrl":"https://cdn.3dassets.dev/assets/23260/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-maglev-station-platform-po-032e8532","thumbnailUrl":"https://cdn.3dassets.dev/assets/23260/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23260/v1/poster.webp","blurhash":"UCF6IK-=00jE~qD%IB%L00IU%hWV00-;X8M{","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":69492,"triangles":1320,"vertices":3960,"meshes":8,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-5.199865718558305,0.000414450895427354,-8],"max":[5.199865718558305,5.98032688068875,8]},"sizeMeters":[10.4,5.98,16],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":8,"publishedAt":"2026-09-07T20:07:37.920Z","updatedAt":"2026-10-25T10:41:54.687Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23260/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MaglevStationPlatformPodSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23260/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23260/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23260/v1/model.glb\" alt=\"Maglev Station Platform Pod (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23260/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23260/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23261","slug":"arcology-towers-and-skyways-maglev-car-head-20349bf5","title":"Maglev Car, Driving End (Sci-Fi City Towers and Skyways)","summary":"A 14 m maglev driving car: a smooth lofted body 3 m wide and 3.1 m tall, a raked windscreen, a continuous glazing strip, teal levitation skirts, roof equipment fairing, a light bar, a rear gangway ring and six named sliding door nodes.","description":"A 14 m maglev driving car: a smooth lofted body 3 m wide and 3.1 m tall, a raked windscreen, a continuous glazing strip, teal levitation skirts, roof equipment fairing, a light bar, a rear gangway ring and six named sliding door nodes. Bounding size 3.14 x 3.32 x 14.11 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Movable parts are separate named nodes with local pivots: door-left-36, door-right-36, door-left-14, door-right-14, door-left-50, door-right-50. The car body base sits on the guideway running surface: place it 1.6 m above a guideway module base. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-maglev-car-head-20349bf5","cdnUrl":"https://cdn.3dassets.dev/assets/23261/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-maglev-car-head-20349bf5","thumbnailUrl":"https://cdn.3dassets.dev/assets/23261/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23261/v1/poster.webp","blurhash":"UEB|sgayD$bb-p8_R*x]00Io-;xa9t_NxuIU","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":29080,"triangles":500,"vertices":1500,"meshes":8,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.5699148654326547,0.00004883272918454473,-7.110000133514404],"max":[1.5699148654326547,3.3201087706474732,7]},"sizeMeters":[3.14,3.32,14.11],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:38.581Z","updatedAt":"2026-10-25T16:51:53.192Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23261/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MaglevCarDrivingEndSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23261/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23261/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23261/v1/model.glb\" alt=\"Maglev Car, Driving End (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23261/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23261/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23262","slug":"arcology-towers-and-skyways-maglev-car-mid-0e0d906c","title":"Maglev Car, Intermediate (Sci-Fi City Towers and Skyways)","summary":"A 14 m intermediate maglev car with flat gangway ends: the same 3 m lofted body section as the driving car, a continuous glazing strip, teal levitation skirts, a roof equipment fairing and six named sliding door nodes.","description":"A 14 m intermediate maglev car with flat gangway ends: the same 3 m lofted body section as the driving car, a continuous glazing strip, teal levitation skirts, a roof equipment fairing and six named sliding door nodes. Bounding size 3.14 x 3.72 x 14.22 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Movable parts are separate named nodes with local pivots: door-left-46, door-right-46, door-left-0, door-right-0. The car body base sits on the guideway running surface: place it 1.6 m above a guideway module base. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-maglev-car-mid-0e0d906c","cdnUrl":"https://cdn.3dassets.dev/assets/23262/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-maglev-car-mid-0e0d906c","thumbnailUrl":"https://cdn.3dassets.dev/assets/23262/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23262/v1/poster.webp","blurhash":"UCB;B]V[DOV@-p4nWB%M00I..8xa9Z~qt7D%","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":29056,"triangles":532,"vertices":1596,"meshes":8,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.5699117769636053,-0.00020992805367914258,-7.110000133514404],"max":[1.5699117769636053,3.7202099566639086,7.110000133514404]},"sizeMeters":[3.14,3.72,14.22],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:38.697Z","updatedAt":"2026-10-25T08:22:10.031Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23262/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function MaglevCarIntermediateSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23262/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23262/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23262/v1/model.glb\" alt=\"Maglev Car, Intermediate (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23262/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23262/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23263","slug":"arcology-towers-and-skyways-plaza-deck-tile-0b6c5dfd","title":"Plaza Deck Tile (Sci-Fi City Towers and Skyways)","summary":"An 8 m square elevated plaza deck tile: four columns, a slab with a teal fascia band and continuous underside lighting, a paved surface with inlaid panels and an amber inlay ring. Tiles abut on the deck ports at 2.4 m.","description":"An 8 m square elevated plaza deck tile: four columns, a slab with a teal fascia band and continuous underside lighting, a paved surface with inlaid panels and an amber inlay ring. Tiles abut on the deck ports at 2.4 m. Bounding size 8.00 x 2.43 x 8.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: deck-north (deck) at 0.00, 2.40, 4.00; deck-east (deck) at 4.00, 2.40, 0.00; deck-south (deck) at 0.00, 2.40, -4.00; deck-west (deck) at -4.00, 2.40, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-plaza-deck-tile-0b6c5dfd","cdnUrl":"https://cdn.3dassets.dev/assets/23263/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-plaza-deck-tile-0b6c5dfd","thumbnailUrl":"https://cdn.3dassets.dev/assets/23263/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23263/v1/poster.webp","blurhash":"UIDm5Pxu00WV~qofIUfk00RQ-;jZ00WB%1V@","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":26012,"triangles":464,"vertices":1392,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-4,-0.00009750297218213966,-4],"max":[4,2.4312151484331257,4]},"sizeMeters":[8,2.431,8],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:39.078Z","updatedAt":"2026-10-25T11:18:19.864Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23263/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PlazaDeckTileSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23263/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23263/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23263/v1/model.glb\" alt=\"Plaza Deck Tile (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23263/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23263/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23264","slug":"arcology-towers-and-skyways-planted-deck-tile-667ba717","title":"Planted Deck Tile (Sci-Fi City Towers and Skyways)","summary":"The 8 m deck tile with a long planter bed, two trees, three clipped shrubs and two benches: the same footprint, columns and deck ports as the plain plaza tile.","description":"The 8 m deck tile with a long planter bed, two trees, three clipped shrubs and two benches: the same footprint, columns and deck ports as the plain plaza tile. Bounding size 8.00 x 8.09 x 8.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: deck-north (deck) at 0.00, 2.40, 4.00; deck-east (deck) at 4.00, 2.40, 0.00; deck-south (deck) at 0.00, 2.40, -4.00; deck-west (deck) at -4.00, 2.40, 0.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-planted-deck-tile-667ba717","cdnUrl":"https://cdn.3dassets.dev/assets/23264/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-planted-deck-tile-667ba717","thumbnailUrl":"https://cdn.3dassets.dev/assets/23264/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23264/v1/poster.webp","blurhash":"UEC%jL?t00H[D~t7s;My00M{.6S1_4RkSwx[","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":60832,"triangles":1184,"vertices":3552,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-4,-0.00002059082445482474,-4],"max":[4,8.093934260438576,4]},"sizeMeters":[8,8.094,8],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:39.210Z","updatedAt":"2026-10-25T16:32:11.922Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23264/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PlantedDeckTileSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23264/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23264/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23264/v1/model.glb\" alt=\"Planted Deck Tile (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23264/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23264/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23265","slug":"arcology-towers-and-skyways-deck-stair-ramp-module-653e5174","title":"Deck Stair and Ramp Module (Sci-Fi City Towers and Skyways)","summary":"An 8 by 16 m access module that brings the 2.4 m street deck to ground level: a 13 m accessible ramp with double handrails on the west half, an eight-riser stair on the east half, a short deck landing and edge lighting.","description":"An 8 by 16 m access module that brings the 2.4 m street deck to ground level: a 13 m accessible ramp with double handrails on the west half, an eight-riser stair on the east half, a short deck landing and edge lighting. Bounding size 8.12 x 3.52 x 16.00 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Assembly ports: deck-south (deck) at 0.00, 2.40, -8.00. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-deck-stair-ramp-module-653e5174","cdnUrl":"https://cdn.3dassets.dev/assets/23265/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-deck-stair-ramp-module-653e5174","thumbnailUrl":"https://cdn.3dassets.dev/assets/23265/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23265/v1/poster.webp","blurhash":"UBDvfxWZ00?H-p9FD%t700ad?bM|D%~q_3a$","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"modular","title":"Modular"},{"slug":"kit","title":"Kit / Set"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":39464,"triangles":780,"vertices":2340,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-4.0001825579071255,-0.00023189298830184057,-8.001066464582085],"max":[4.1201824434662075,3.5250494201826004,8]},"sizeMeters":[8.12,3.525,16.001],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:39.397Z","updatedAt":"2026-10-05T13:33:03.135Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23265/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function DeckStairAndRampModuleSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23265/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23265/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23265/v1/model.glb\" alt=\"Deck Stair and Ramp Module (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23265/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23265/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23266","slug":"arcology-towers-and-skyways-transit-portal-head-house-f12ca1bb","title":"Transit Portal Head House (Sci-Fi City Towers and Skyways)","summary":"A glazed circular head house that takes a street deck down to the transit level: a domed drum with a lit eaves ring, an escalator mouth with amber treads, glass balustrades and a canopy carrying a name band.","description":"A glazed circular head house that takes a street deck down to the transit level: a domed drum with a lit eaves ring, an escalator mouth with amber treads, glass balustrades and a canopy carrying a name band. Bounding size 8.94 x 6.35 x 11.80 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-transit-portal-head-house-f12ca1bb","cdnUrl":"https://cdn.3dassets.dev/assets/23266/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-transit-portal-head-house-f12ca1bb","thumbnailUrl":"https://cdn.3dassets.dev/assets/23266/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23266/v1/poster.webp","blurhash":"UDEyf0_300D$D%Mxx]xu00IA~qozIpxvxZV?","category":{"slug":"buildings","title":"Buildings & Architecture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":52672,"triangles":984,"vertices":2952,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-4.470321225498609,-0.00021149028083186638,-7.400000095367432],"max":[4.470321225498609,6.350147279693453,4.402090549468994]},"sizeMeters":[8.941,6.35,11.802],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:39.455Z","updatedAt":"2026-10-06T11:17:23.918Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23266/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function TransitPortalHeadHouseSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23266/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23266/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23266/v1/model.glb\" alt=\"Transit Portal Head House (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23266/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23266/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23267","slug":"arcology-towers-and-skyways-plaza-kiosk-8a9fae00","title":"Plaza Kiosk (Sci-Fi City Towers and Skyways)","summary":"A 4.6 m round plaza kiosk: a shell drum with a glazed service band, a folded teal canopy with a glowing eaves ring, an amber serving shelf on alloy brackets and a lit sign panel on a mast.","description":"A 4.6 m round plaza kiosk: a shell drum with a glazed service band, a folded teal canopy with a glowing eaves ring, an amber serving shelf on alloy brackets and a lit sign panel on a mast. Bounding size 4.72 x 3.50 x 4.72 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-plaza-kiosk-8a9fae00","cdnUrl":"https://cdn.3dassets.dev/assets/23267/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-plaza-kiosk-8a9fae00","thumbnailUrl":"https://cdn.3dassets.dev/assets/23267/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23267/v1/poster.webp","blurhash":"UCC@BD-:00E19]af-obF00M{?^xu:%s,Ega$","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":33140,"triangles":640,"vertices":1920,"meshes":7,"materials":7,"textures":0,"animations":[],"boundingBox":{"min":[-2.359999895095825,0.00006195615051494963,-2.359999895095825],"max":[2.359999895095825,3.4999096356622212,2.359999895095825]},"sizeMeters":[4.72,3.5,4.72],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":7,"publishedAt":"2026-09-07T20:07:39.637Z","updatedAt":"2026-10-25T16:59:17.747Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23267/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PlazaKioskSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23267/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23267/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23267/v1/model.glb\" alt=\"Plaza Kiosk (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23267/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23267/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23268","slug":"arcology-towers-and-skyways-food-stall-478a50cf","title":"Deck Food Stall (Sci-Fi City Towers and Skyways)","summary":"A 3.2 m deck food stall: a shell counter body with a teal service hatch, an alloy worktop, a curved amber awning on two posts with a light bar, three stools and a stacked supply crate.","description":"A 3.2 m deck food stall: a shell counter body with a teal service hatch, an alloy worktop, a curved amber awning on two posts with a light bar, three stools and a stacked supply crate. Bounding size 3.50 x 3.05 x 3.02 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-food-stall-478a50cf","cdnUrl":"https://cdn.3dassets.dev/assets/23268/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-food-stall-478a50cf","thumbnailUrl":"https://cdn.3dassets.dev/assets/23268/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23268/v1/poster.webp","blurhash":"UFHB@[E500-:~3f-9vIU00Rix]%MA1xsxWxb","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":26264,"triangles":460,"vertices":1380,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.75,-0.00008057184644943982,-1.1500426901504794],"max":[1.75,3.0499711933871465,1.8750053580195394]},"sizeMeters":[3.5,3.05,3.025],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":7,"publishedAt":"2026-09-07T20:07:40.607Z","updatedAt":"2026-10-05T21:07:21.062Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23268/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function DeckFoodStallSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23268/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23268/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23268/v1/model.glb\" alt=\"Deck Food Stall (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23268/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23268/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23269","slug":"arcology-towers-and-skyways-seating-cluster-cb4e5757","title":"Plaza Seating Cluster (Sci-Fi City Towers and Skyways)","summary":"A 6 m seating cluster: three curved amber benches on alloy legs arranged around a square shell planter with a single tree, ringed by a flush glowing paving band.","description":"A 6 m seating cluster: three curved amber benches on alloy legs arranged around a square shell planter with a single tree, ringed by a flush glowing paving band. Bounding size 6.02 x 4.10 x 6.02 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-seating-cluster-cb4e5757","cdnUrl":"https://cdn.3dassets.dev/assets/23269/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-seating-cluster-cb4e5757","thumbnailUrl":"https://cdn.3dassets.dev/assets/23269/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23269/v1/poster.webp","blurhash":"UHC?+Cxu00Mx01WB%Ma#00Rj.6t7~Wj[X7t6","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":48412,"triangles":926,"vertices":2778,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-3.009999990463257,-0.00005697533858903259,-3.009999990463257],"max":[3.009999990463257,4.103000164031982,3.009999990463257]},"sizeMeters":[6.02,4.103,6.02],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":8,"publishedAt":"2026-09-07T20:07:40.975Z","updatedAt":"2026-10-25T14:27:30.515Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23269/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PlazaSeatingClusterSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23269/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23269/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23269/v1/model.glb\" alt=\"Plaza Seating Cluster (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23269/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23269/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23271","slug":"arcology-towers-and-skyways-signage-pylon-holographic-46ca02cb","title":"Holographic Signage Pylon (Sci-Fi City Towers and Skyways)","summary":"A 5.6 m wayfinding pylon: a slim shell shaft on a round base with a full-height glowing display face, a matching glass face behind, alloy banding and a projected sign panel cantilevered from the head.","description":"A 5.6 m wayfinding pylon: a slim shell shaft on a round base with a full-height glowing display face, a matching glass face behind, alloy banding and a projected sign panel cantilevered from the head. Bounding size 2.95 x 5.56 x 1.70 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-signage-pylon-holographic-46ca02cb","cdnUrl":"https://cdn.3dassets.dev/assets/23271/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-signage-pylon-holographic-46ca02cb","thumbnailUrl":"https://cdn.3dassets.dev/assets/23271/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23271/v1/poster.webp","blurhash":"U8C6_e~q0000%#NFMd%M00IU~W^+4.t7-;IU","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":18696,"triangles":304,"vertices":912,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-0.8500000238418579,0.000011288167359485568,-0.8500000238418579],"max":[2.100087428699972,5.55992692133969,0.8500000238418579]},"sizeMeters":[2.95,5.56,1.7],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":7,"publishedAt":"2026-09-07T20:07:41.053Z","updatedAt":"2026-10-05T21:07:25.384Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23271/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function HolographicSignagePylonSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23271/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23271/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23271/v1/model.glb\" alt=\"Holographic Signage Pylon (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23271/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23271/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23272","slug":"arcology-towers-and-skyways-bollard-row-3cf1b14a","title":"Deck Bollard Row (Sci-Fi City Towers and Skyways)","summary":"A 7 m run of five lit deck bollards with glowing caps, teal base plates, alloy link rails between them and an amber floor marking strip.","description":"A 7 m run of five lit deck bollards with glowing caps, teal base plates, alloy link rails between them and an amber floor marking strip. Bounding size 7.00 x 0.96 x 0.85 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-bollard-row-3cf1b14a","cdnUrl":"https://cdn.3dassets.dev/assets/23272/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-bollard-row-3cf1b14a","thumbnailUrl":"https://cdn.3dassets.dev/assets/23272/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23272/v1/poster.webp","blurhash":"U9C6x.-oD%xYbd~pxtM|00Iq?bkCsj00IX%M","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":31052,"triangles":568,"vertices":1704,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-3.5,0.00009798616690215312,-0.2971161877766634],"max":[3.5,0.9598916542947713,0.5499786400235991]},"sizeMeters":[7,0.96,0.847],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":6,"publishedAt":"2026-09-07T20:07:41.066Z","updatedAt":"2026-10-05T21:07:25.791Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23272/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function DeckBollardRowSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23272/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23272/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23272/v1/model.glb\" alt=\"Deck Bollard Row (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23272/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23272/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23270","slug":"arcology-towers-and-skyways-canopy-shelter-c1f7049b","title":"Petal Canopy Shelter (Sci-Fi City Towers and Skyways)","summary":"A 6.5 m six-petal canopy shelter on a single alloy column: alternating shell and glass petals on radial ribs, a teal hub cap and a glowing collar at head height.","description":"A 6.5 m six-petal canopy shelter on a single alloy column: alternating shell and glass petals on radial ribs, a teal hub cap and a glowing collar at head height. Bounding size 6.50 x 3.99 x 5.85 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-canopy-shelter-c1f7049b","cdnUrl":"https://cdn.3dassets.dev/assets/23270/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-canopy-shelter-c1f7049b","thumbnailUrl":"https://cdn.3dassets.dev/assets/23270/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23270/v1/poster.webp","blurhash":"UIB::Bt700M{_NayMxj[9FWU%Mof4moeo}WB","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":36080,"triangles":656,"vertices":1968,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-3.2502056291157424,0.00003601533896857578,-2.9245824813842773],"max":[3.2502056291157424,3.989902039746702,2.9245824813842773]},"sizeMeters":[6.5,3.99,5.849],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":7,"publishedAt":"2026-09-07T20:07:41.071Z","updatedAt":"2026-10-25T09:31:36.166Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23270/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PetalCanopyShelterSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23270/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23270/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23270/v1/model.glb\" alt=\"Petal Canopy Shelter (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23270/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23270/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23274","slug":"arcology-towers-and-skyways-fusion-vent-stack-b8b50014","title":"Arcology Vent Stack (Sci-Fi City Towers and Skyways)","summary":"A 13 m district plant vent stack: a stepped plinth, a waisted flue that flares at the head over a glowing throat, five teal stiffening rings, four alloy strakes, feed pipes and a service cabinet.","description":"A 13 m district plant vent stack: a stepped plinth, a waisted flue that flares at the head over a glowing throat, five teal stiffening rings, four alloy strakes, feed pipes and a service cabinet. Bounding size 5.00 x 13.10 x 4.60 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-fusion-vent-stack-b8b50014","cdnUrl":"https://cdn.3dassets.dev/assets/23274/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-fusion-vent-stack-b8b50014","thumbnailUrl":"https://cdn.3dassets.dev/assets/23274/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23274/v1/poster.webp","blurhash":"U5B|Tx?b0000DiRPW=x]^Qso9]Nu~pfP9Foz","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":77276,"triangles":1528,"vertices":4584,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-2.499793959556364,-0.000028969259844524586,-2.299999952316284],"max":[2.499793959556364,13.100000381469727,2.299999952316284]},"sizeMeters":[5,13.1,4.6],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:41.292Z","updatedAt":"2026-10-05T08:35:09.371Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23274/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ArcologyVentStackSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23274/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23274/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23274/v1/model.glb\" alt=\"Arcology Vent Stack (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23274/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23274/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23273","slug":"arcology-towers-and-skyways-water-column-352e23a8","title":"Plaza Water Column (Sci-Fi City Towers and Skyways)","summary":"A 5.9 m plaza water feature: a stone-toned basin ring holding a glass sheet of water, a slender glazed column with a teal collar and four alloy stays, an alloy spill head and a glowing basin ring.","description":"A 5.9 m plaza water feature: a stone-toned basin ring holding a glass sheet of water, a slender glazed column with a teal collar and four alloy stays, an alloy spill head and a glowing basin ring. Bounding size 6.40 x 5.85 x 6.40 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-water-column-352e23a8","cdnUrl":"https://cdn.3dassets.dev/assets/23273/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-water-column-352e23a8","thumbnailUrl":"https://cdn.3dassets.dev/assets/23273/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23273/v1/poster.webp","blurhash":"UDDmBi-;00D%00Rj-;bI00Rj.9t7~pkCt7xa","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":61040,"triangles":1176,"vertices":3528,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-3.200000047683716,-0.000008390727585794178,-3.200000047683716],"max":[3.200000047683716,5.849999904632568,3.200000047683716]},"sizeMeters":[6.4,5.85,6.4],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:41.171Z","updatedAt":"2026-10-25T15:02:02.228Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23273/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function PlazaWaterColumnSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23273/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23273/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23273/v1/model.glb\" alt=\"Plaza Water Column (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23273/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23273/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23275","slug":"arcology-towers-and-skyways-drone-landing-pad-81b00bea","title":"Drone Landing Pad (Sci-Fi City Towers and Skyways)","summary":"A 6.8 m hexagonal drone landing pad: a shell plinth with a paved deck, an amber touchdown ring and cross, six lit edge posts and a teal charging post with a status display and beacon.","description":"A 6.8 m hexagonal drone landing pad: a shell plinth with a paved deck, an amber touchdown ring and cross, six lit edge posts and a teal charging post with a status display and beacon. Bounding size 5.89 x 3.82 x 6.85 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-drone-landing-pad-81b00bea","cdnUrl":"https://cdn.3dassets.dev/assets/23275/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-drone-landing-pad-81b00bea","thumbnailUrl":"https://cdn.3dassets.dev/assets/23275/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23275/v1/poster.webp","blurhash":"UND,4Sn$01o#4oRj%Mt700R+-:n$~Wt7IWRQ","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":47868,"triangles":912,"vertices":2736,"meshes":6,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-2.9446883360219838,-0.00017929800127852724,-3.450027475127456],"max":[2.9446883360219838,3.820160799994294,3.4000000953674316]},"sizeMeters":[5.889,3.82,6.85],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:42.389Z","updatedAt":"2026-10-05T13:33:10.816Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23275/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function DroneLandingPadSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23275/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23275/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23275/v1/model.glb\" alt=\"Drone Landing Pad (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23275/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23275/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23276","slug":"arcology-towers-and-skyways-courier-drone-8491fcf3","title":"Arcology Courier Drone (Sci-Fi City Towers and Skyways)","summary":"A 2.1 m span quadrotor courier drone: a shell body with a glazed sensor blister, a teal cargo pod, four ducted rotors on alloy arms with named spin nodes, tubular skids and a nose light.","description":"A 2.1 m span quadrotor courier drone: a shell body with a glazed sensor blister, a teal cargo pod, four ducted rotors on alloy arms with named spin nodes, tubular skids and a nose light. Bounding size 2.71 x 0.94 x 2.71 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Movable parts are separate named nodes with local pivots: rotor-front-right, rotor-rear-right, rotor-front-left, rotor-rear-left. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-courier-drone-8491fcf3","cdnUrl":"https://cdn.3dassets.dev/assets/23276/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-courier-drone-8491fcf3","thumbnailUrl":"https://cdn.3dassets.dev/assets/23276/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23276/v1/poster.webp","blurhash":"U9A^RTof00a#_3j[IUj?00Rk~qof00WB?HWX","category":{"slug":"vehicles","title":"Vehicles"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":60608,"triangles":1272,"vertices":3816,"meshes":10,"materials":6,"textures":0,"animations":[],"boundingBox":{"min":[-1.3550000190734863,-0.000024407929226255565,-1.3550000190734863],"max":[1.3550000190734863,0.9399932820535133,1.3550000190734863]},"sizeMeters":[2.71,0.94,2.71],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:42.413Z","updatedAt":"2026-10-25T08:25:14.880Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23276/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ArcologyCourierDroneSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23276/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23276/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23276/v1/model.glb\" alt=\"Arcology Courier Drone (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23276/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23276/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23280","slug":"arcology-towers-and-skyways-vertical-wind-turbine-744ae1e7","title":"Vertical Axis Wind Turbine (Sci-Fi City Towers and Skyways)","summary":"A 9.3 m vertical axis wind turbine: a tapered mast on a paved footing carrying three helical teal blades between two hubs on a named rotor node, plus a converter cabinet at the base.","description":"A 9.3 m vertical axis wind turbine: a tapered mast on a paved footing carrying three helical teal blades between two hubs on a named rotor node, plus a converter cabinet at the base. Bounding size 3.11 x 9.25 x 3.25 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Movable parts are separate named nodes with local pivots: rotor. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-vertical-wind-turbine-744ae1e7","cdnUrl":"https://cdn.3dassets.dev/assets/23280/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-vertical-wind-turbine-744ae1e7","thumbnailUrl":"https://cdn.3dassets.dev/assets/23280/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23280/v1/poster.webp","blurhash":"U48;.4%M008_0yRQ^k%MQ8WBuio|8wW;.lsp","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":42432,"triangles":804,"vertices":2412,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-1.7914946397316427,-0.000038148136844995406,-1.6739025400726908],"max":[1.3184734900963277,9.25,1.5796642588226908]},"sizeMeters":[3.11,9.25,3.254],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:42.961Z","updatedAt":"2026-10-05T07:49:19.388Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23280/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function VerticalAxisWindTurbineSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23280/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23280/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23280/v1/model.glb\" alt=\"Vertical Axis Wind Turbine (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23280/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23280/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23277","slug":"arcology-towers-and-skyways-ring-turbine-b2da6d18","title":"Ducted Ring Turbine (Sci-Fi City Towers and Skyways)","summary":"An 8.9 m ducted ring wind turbine: a mast and nacelle carrying a 5.4 m annular shroud with a lit intake lip, four alloy spokes, a hub fairing and seven teal vanes on a named rotor node.","description":"An 8.9 m ducted ring wind turbine: a mast and nacelle carrying a 5.4 m annular shroud with a lit intake lip, four alloy spokes, a hub fairing and seven teal vanes on a named rotor node. Bounding size 5.42 x 10.31 x 2.60 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Movable parts are separate named nodes with local pivots: rotor. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-ring-turbine-b2da6d18","cdnUrl":"https://cdn.3dassets.dev/assets/23277/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-ring-turbine-b2da6d18","thumbnailUrl":"https://cdn.3dassets.dev/assets/23277/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23277/v1/poster.webp","blurhash":"U5BzFB?b0000~qxuIARPD%oftRIV00M|~qoz","category":{"slug":"roads-infrastructure","title":"Roads & Infrastructure"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":54920,"triangles":1064,"vertices":3192,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-2.7100002765655518,-0.000020583945736341036,-1.2999999523162842],"max":[2.7100002765655518,10.3100004196167,1.2999999523162842]},"sizeMeters":[5.42,10.31,2.6],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":10,"publishedAt":"2026-09-07T20:07:42.796Z","updatedAt":"2026-10-05T03:25:53.738Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23277/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function DuctedRingTurbineSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23277/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23277/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23277/v1/model.glb\" alt=\"Ducted Ring Turbine (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23277/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23277/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23278","slug":"arcology-towers-and-skyways-hanging-garden-planter-0a31c0d8","title":"Hanging Garden Planter (Sci-Fi City Towers and Skyways)","summary":"A 4.4 m facade planter module: an alloy mounting plate with three hangers and stays carrying a shell trough with a teal lip, clipped shrubs and a curtain of trained greenery falling 2.5 m below.","description":"A 4.4 m facade planter module: an alloy mounting plate with three hangers and stays carrying a shell trough with a teal lip, clipped shrubs and a curtain of trained greenery falling 2.5 m below. Bounding size 4.40 x 3.70 x 1.86 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-hanging-garden-planter-0a31c0d8","cdnUrl":"https://cdn.3dassets.dev/assets/23278/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-hanging-garden-planter-0a31c0d8","thumbnailUrl":"https://cdn.3dassets.dev/assets/23278/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23278/v1/poster.webp","blurhash":"UJDJw_%f00RQ_4%MNEM{00nm%fS09EWBaPRQ","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":43724,"triangles":852,"vertices":2556,"meshes":4,"materials":4,"textures":0,"animations":[],"boundingBox":{"min":[-2.200000047683716,-0.00006447414252153116,-0.9279360539269162],"max":[2.200000047683716,3.696175676382512,0.9279360539269162]},"sizeMeters":[4.4,3.696,1.856],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":6,"publishedAt":"2026-09-07T20:07:42.846Z","updatedAt":"2026-10-05T21:07:25.888Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23278/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function HangingGardenPlanterSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23278/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23278/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23278/v1/model.glb\" alt=\"Hanging Garden Planter (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23278/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23278/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23279","slug":"arcology-towers-and-skyways-algae-panel-wall-8660932c","title":"Algae Panel Wall (Sci-Fi City Towers and Skyways)","summary":"A 6 by 4.6 m photobioreactor wall: twelve glazed algae cassettes in an alloy frame with distribution headers and riser pipes, standing on a paved kerb with a teal pump unit and a lit status panel.","description":"A 6 by 4.6 m photobioreactor wall: twelve glazed algae cassettes in an alloy frame with distribution headers and riser pipes, standing on a paved kerb with a teal pump unit and a lit status panel. Bounding size 6.00 x 4.60 x 1.67 m (X x Y x Z). Metre units, +Y up, +Z forward, lowest geometry resting on y=0. Static geometry; no rig, collision or navigation data.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-algae-panel-wall-8660932c","cdnUrl":"https://cdn.3dassets.dev/assets/23279/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-algae-panel-wall-8660932c","thumbnailUrl":"https://cdn.3dassets.dev/assets/23279/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23279/v1/poster.webp","blurhash":"U7DJ#4M|00rraK?uIp4o00M{.jt7tn?caH9E","category":{"slug":"props","title":"Props & Furniture"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"exterior","title":"Exterior"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":62208,"triangles":1232,"vertices":3696,"meshes":5,"materials":5,"textures":0,"animations":[],"boundingBox":{"min":[-3,0.00004272889349860032,-0.499893185216834],"max":[3,4.600100666377787,1.1699914489895633]},"sizeMeters":[6,4.6,1.67],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":9,"publishedAt":"2026-09-07T20:07:42.873Z","updatedAt":"2026-10-25T07:32:40.845Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23279/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function AlgaePanelWallSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23279/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23279/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23279/v1/model.glb\" alt=\"Algae Panel Wall (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23279/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23279/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23281","slug":"arcology-towers-and-skyways-three-tower--b27ca724-starter-scene","title":"Three Tower Arcology Block (Sci-Fi City Towers and Skyways)","summary":"A whole arcology block: three towers stacked from podium to crown on the 8 m grid with residential, garden terrace, mechanical, atrium, cantilever, setback, spire and corner sections; three skybridge runs on the tower coupling collars including a four-way junction pod and a...","description":"A whole arcology block: three towers stacked from podium to crown on the 8 m grid with residential, garden terrace, mechanical, atrium, cantilever, setback, spire and corner sections; three skybridge runs on the tower coupling collars including a four-way junction pod and a glazed tube stub; and an elevated maglev line on six pylons carrying a station, a quarter curve, a diverging switch and a three car train. Layout artifact composed from instances of this pack; static geometry only.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-three-tower--b27ca724-starter-scene","cdnUrl":"https://cdn.3dassets.dev/assets/23281/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-three-tower--b27ca724-starter-scene","thumbnailUrl":"https://cdn.3dassets.dev/assets/23281/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23281/v1/poster.webp","blurhash":"UDBzOaxt00WB9FRjt8WA00of_3ay_Nt7Rit8","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":1743196,"triangles":38174,"vertices":89159,"meshes":202,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-18.944688336021983,-0.00017929800127852724,-82.20000004768372],"max":[66.5124974149986,63.31999969482422,58.339907528916285]},"sizeMeters":[85.457,63.32,140.54],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":29,"publishedAt":"2026-09-07T20:07:44.451Z","updatedAt":"2026-10-25T16:40:16.697Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23281/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ThreeTowerArcologyBlockSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23281/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23281/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23281/v1/model.glb\" alt=\"Three Tower Arcology Block (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23281/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23281/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23282","slug":"arcology-towers-and-skyways-street-deck-plaza-c373f429","title":"Street Deck Plaza (Sci-Fi City Towers and Skyways)","summary":"A nine tile elevated street deck at 2.4 m, mixing plain and planted tiles, with a stair and ramp module bringing it down to ground on the south edge. The deck carries a transit portal head house, a kiosk, a food stall, a seating cluster, a petal canopy, wayfinding pylons, a...","description":"A nine tile elevated street deck at 2.4 m, mixing plain and planted tiles, with a stair and ramp module bringing it down to ground on the south edge. The deck carries a transit portal head house, a kiosk, a food stall, a seating cluster, a petal canopy, wayfinding pylons, a bollard run, a water column, a hanging planter, a drone pad with a courier drone, and a turbine, vent stack and algae wall standing at ground level. Layout artifact; static geometry only.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-street-deck-plaza-c373f429","cdnUrl":"https://cdn.3dassets.dev/assets/23282/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-street-deck-plaza-c373f429","thumbnailUrl":"https://cdn.3dassets.dev/assets/23282/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23282/v1/poster.webp","blurhash":"UCA^dw.800R6DiV@%Moz00IU?ukA_NtRD%Vt","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":672624,"triangles":14634,"vertices":33580,"meshes":98,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-22.499793959556364,-0.00023189298830184057,-28],"max":[14.318473490096327,13.100000381469727,12.468520993344512]},"sizeMeters":[36.818,13.1,40.469],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":11,"publishedAt":"2026-09-07T20:07:43.510Z","updatedAt":"2026-10-05T21:07:31.055Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23282/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function StreetDeckPlazaSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23282/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23282/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23282/v1/model.glb\" alt=\"Street Deck Plaza (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23282/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23282/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}},{"id":"23283","slug":"arcology-towers-and-skyways-connector-cases-a476800b","title":"Connector Cases (Sci-Fi City Towers and Skyways)","summary":"Independent test assemblies covering all four port types. Two tower stacks exercise stack ports across nine section types and both crowns. A skybridge chain runs a coupling, a straight span, a four way junction pod, a glazed tube, a short span, a tee junction, a trellis span...","description":"Independent test assemblies covering all four port types. Two tower stacks exercise stack ports across nine section types and both crowns. A skybridge chain runs a coupling, a straight span, a four way junction pod, a glazed tube, a short span, a tee junction, a trellis span, an escalator link that climbs one 8 m level and a curved span into a closing coupling. A maglev chain runs a straight, a half straight, a station, two quarter curves and both legs of the switch. A deck run tiles east, west and north and drops to ground on the stair and ramp module. Every mate carries a checked connection assertion.","status":"published","url":"https://3dassets.dev/assets/arcology-towers-and-skyways-connector-cases-a476800b","cdnUrl":"https://cdn.3dassets.dev/assets/23283/v1/model.glb","downloadUrl":"https://3dassets.dev/download/arcology-towers-and-skyways-connector-cases-a476800b","thumbnailUrl":"https://cdn.3dassets.dev/assets/23283/v1/thumb.webp","posterUrl":"https://cdn.3dassets.dev/assets/23283/v1/poster.webp","blurhash":"UB9j.W.800DiIURjt7tR00D%~q%M.8xuRjRP","category":{"slug":"environments","title":"Environments & Scenes"},"tags":[{"slug":"sci-fi","title":"Sci-Fi"},{"slug":"stylized","title":"Stylized"},{"slug":"kit","title":"Kit / Set"}],"license":{"slug":"cc0-1.0","name":"CC0 1.0 Universal","url":"https://creativecommons.org/publicdomain/zero/1.0/","attributionRequired":false},"contributor":{"username":"3dassets","name":"3D Assets","url":"https://3dassets.dev/u/3dassets"},"stats":{"fileSize":1828320,"triangles":39578,"vertices":94155,"meshes":202,"materials":8,"textures":0,"animations":[],"boundingBox":{"min":[-58.200000047683716,-0.00023189298830184057,-146.20000004768372],"max":[80.33709645271301,57.09973592242225,26.00119972229004]},"sizeMeters":[138.537,57.1,172.201],"hasDraco":false,"hasMeshopt":false,"hasKTX2":false,"extensionsUsed":["KHR_mesh_quantization"]},"aiGenerated":true,"aiModel":"Claude Fable 5.1","downloads":12,"publishedAt":"2026-09-07T20:07:45.381Z","updatedAt":"2026-10-25T10:33:26.092Z","usage":{"threejs":"import { GLTFLoader } from 'three/addons/loaders/GLTFLoader.js'\n\nconst loader = new GLTFLoader()\nloader.load('https://cdn.3dassets.dev/assets/23283/v1/model.glb', (gltf) => {\n  scene.add(gltf.scene)\n})","r3f":"import { useGLTF } from '@react-three/drei'\n\nexport function ConnectorCasesSciFiCityTowersAndSkyways(props) {\n  const { scene } = useGLTF('https://cdn.3dassets.dev/assets/23283/v1/model.glb')\n  return <primitive object={scene} {...props} />\n}\nuseGLTF.preload('https://cdn.3dassets.dev/assets/23283/v1/model.glb')","modelViewer":"<model-viewer src=\"https://cdn.3dassets.dev/assets/23283/v1/model.glb\" alt=\"Connector Cases (Sci-Fi City Towers and Skyways)\" camera-controls auto-rotate></model-viewer>","blender":"# Blender 4.x: File > Import > glTF 2.0, or from the Python console after downloading the file.\nimport bpy\nbpy.ops.import_scene.gltf(filepath='model.glb')  # from https://cdn.3dassets.dev/assets/23283/v1/model.glb\n# Metres and +Y up are converted to Blender's Z-up scene automatically.","godot":"# Godot 4: copy model.glb into res://models/ and the editor imports it as a scene.\nvar packed := load(\"res://models/model.glb\") as PackedScene\nvar model := packed.instantiate()\nadd_child(model)","unity":"// Unity: import model.glb with glTFast (Package Manager: com.unity.cloud.gltfast) and drag the prefab in,\n// or load it at runtime straight from the CDN:\nusing GLTFast;\nvar gltf = new GltfImport();\nif (await gltf.Load(\"https://cdn.3dassets.dev/assets/23283/v1/model.glb\")) await gltf.InstantiateMainSceneAsync(transform);"}}],"demo":null}}